The 70319 Cinema Contour Fixed Frame Screen by Da-Lite has a 72.5 x 116.0" viewing area, 16:10 aspect ratio, and 137" diagonal.

Da-Mat is a unity gain vinyl surface with a smooth surface and 120° viewing angle. It features a white surface for good color reproduction in environments with controllable ambient light. Da-Mat can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified. Black backing on the back of the viewing surface prevents light bleed-through.

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

137" Diagonal    16:10 Wide Format    Da-Mat Surface    1.0 Gain & 120° Viewing Angle    Black Backing Retains Brightness    Surface is Seamless    3" Wide Frame    Pro-Trim Fabric Frame Covering

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Standard black backing retains projected brightness

Related Questions and Answers

Q: 1. Can it control a BMD studio camera zoom lens? And can you control the zoom ring for an ATEM mini?

A: The SmallRig Wireless Follow Focus Lite Kit can be used to pull focus or zoom on any lens so long as the lens has a compatible gear ring on that element. The SmallRig Wireless Follow Focus Lite Kit is not compatible with the ATEM control software.

Q: 2. Will this work with a canon eos 250d? Even the hot shoe included?

A: Yes, the Elinchrom Skyport transmitter included with the Elinchrom D-Lite RX 4/4 Softbox to Go Kit would be compatible with DSLR cameras such as the Canon EOS 250D.

Q: 3. Hi! Is angenieux ez compatible with angenieux extender 1.4x and 2x?

A: I'm afraid not, the 1.4x and 2x extenders are for the Optimo Zoom Lenses only.

Q: 4. If I'm using Phottix Indra, do I still need to get an external receiver?

A: The Indra has a receiver built in.

Q: 5. What is the color temperature for this unit? Is it the same as the dlite 200ws? And does the temperature change with increase in flash power?

A: According to Elinchrom, all of the current D-Lite RX monolights have a flash tube balance for 5500 Kelvin when the units are set to full power. Unfortunately, there is no information regarding what the color temperature would be at lower power settings.

Q: 6. Is there a portable power pack to go with the D-Lite RX 4? I can't find one anywhere. I'd like to take it outdoors for Senior sessions.

A: No, it uses mains power - for outdoors you would probably need a generator.Alternatively use something like an elinchrom ranger quadra system

Q: 7. Does this particular version of the Yungnuo 50mm pass (i.e. transmit,) UltraViolet light through it?

A: Yongnuo YN 50mm f/1.8S DA DSM Lens for Sony E passes white light.

Q: 8. Will these flashes work on the Panasonic GH5?

A: These flashes will work with a Panasonic GH5.

Q: 9. Has anybody seen a lit of the various flash durations for these? I know they report 1/800th at full power, but what are the flash durations at, say, 1/2, or 1/16th? I can't find anything like this listed anywhere. I'm considering the new HS transmitter, and these durations are going to be important.

A: Hi,There is no published flash duration data for lower settings. Generally, theFastest flash duration is always at full flash power for our units, and it gets slower when you decrease flash power.The reason is that by reducing the flash power you also decrease the capacitor voltage and lower voltage will give a longer, slower flash duration. This rule does not apply for ELC units as they are using a different technology.A global rule at minimum power the flash duration will be around 40% slower.I hope this helps.Regards,Will HBrand Manager Lighting, MAC Group US

Q: 10. Will this fit on the new Lastolite Joe McNally Ezybox Speed-Lite 2 Plus? (B&H # LALS2430JM) (MFR # LL LS2430JM)

A: Yes it will