The 70335 Cinema Contour Fixed Frame Screen by Da-Lite has a 100 x 160" viewing area, 16:10 aspect ratio, and 189" diagonal.

The High Contrast Cinema Perf viewing surface offers a 100° total viewing angle (50° half angle) and a gain of 1.1. It is a perforated vinyl surface that allows for the installation of speakers behind the surface. It features a gray base for deeper reproductions of black, which improves contrast, and an increased reflectivity to enhance brightness where a moderate level of ambient light is present. It is suitable for video images. High Contrast Cinema Perf can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified. Black backing on the back of the viewing surface prevents light bleed-through.

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

189" Diagonal    16:10 Wide Format    High Contrast Cinema Vision Surface    1.1 Gain & 100° Viewing Angle    Black Backing Retains Brightness    Surface is Seamless    3" Wide Frame    Pro-Trim Fabric Frame Covering

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Standard black backing retains projected brightness

Related Questions and Answers

Q: 1. I love using this lighting set. Question: When I use three elinchrom flashheads, they sound not together really quickly. Is there anything I need to check? Is there a manual download for the trigger plus? I found a two page manual on the elinchrom website.

A: What sound? Fan, beep? If they are at different power levels they may sound different.

Q: 2. Is the motor compatible with the SmallRig Wireless Follow Focus Contro? https://www.bhphotovideo.com/c/product/1730054-REG/small

A: Yes, the SmallRig Wireless Follow Focus Lite Kit included focus motor is compatible with the SmallRig Wireless Follow Focus Controller Kit (BH #SM3917).

Q: 3. Is the honeycomb grid and hood diffuser included in this set? If not, do you have anything that will work with this set?

A: A softbox is included for each head in this kit. However, there are no grids available to fit them. For grids to fit the lamp heads using a reflector, you may consider the Elinchrom Reflector and Honeycomb Grid Set, B&H # ELCGS8.25 . https://bhpho.to/36ARezX

Q: 4. Does it also work with the Rotolight Elinchrom Skyport EL transmitter? (So not the Plus model) I'like to use it with Rotolights.

A: The Elinchrom D light RX One flash head does have A wireless receiver built in to the unit.

Q: 5. Hey there, can this be dismantled so I can only have the cage and the top handle mounted to the BMPCC 4k?

A: Yes, you will be able to physically separate the cage kit and use just the top handle and cage.

Q: 6. Hi. What is the GN for this strobe? I am looking to get a few for studio assignments which requires F8-F13 apertures.? I have a phottix Luna beauty dish i wish to mount on this strobe, is there a mount converter for it? what is the syn cable supplied: 3.5mm - PC? I'm using a pentax K3 so will have to sync using cable with RF603CII, will it work? Thanks in advance.

A: I don't remember the GN off hand, but it will most definitely handle the apertures you are mentioning. It's very powerful! You can get conversion mounts for it either at b&h or most definitely amazon. the sync cable supplied is what you also mentioned. but I'm not sure about the rf603cII. I use radio remote triggers (pocket wizards)

Q: 7. What is the part # for the reflector that will fit the D-Lite 400W/s RX 4? I see that it does not come with one.

A: ELR6 is the umbrella reflector https://bhpho.to/2K0SfIe.

Q: 8. What is the color temperature for this unit? Is it the same as the dlite 200ws? And does the temperature change with increase in flash power?

A: According to Elinchrom, all of the current D-Lite RX monolights have a flash tube balance for 5500 Kelvin when the units are set to full power. Unfortunately, there is no information regarding what the color temperature would be at lower power settings.

Q: 9. Hi , can i use it with Leica q ?

A: While you can use this kit with the Leica Q, it has not been tested to our knowledge. Your results may vary.

Q: 10. If used for zoom ring, does it have zoom speeds changes?

A: The motor of the SmallRig Wireless Follow Focus Lite Kit will react with the speed in which the control wheel on the handwheel controller is spun. In other words, the motor will spin the zoom ring as fast or slow as you spin the control wheel.