The 70336 Cinema Contour Fixed Frame Screen by Da-Lite has a 100 x 160" viewing area, 16:10 aspect ratio, and 189" diagonal.

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of both front and rear projection. It has a gain of 0.9 and 130° viewing angle. It is suitable for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. This seamless surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification..

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

189" Diagonal    16:10 Wide Format    Dual Vision Surface    0.9 Gain & 130° Viewing Angle    Surface is Seamless    3" Wide Frame    Pro-Trim Fabric Frame Covering

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Related Questions and Answers

Q: 1. Can I use bowens 500 light with a umbrella with this?

A: You can use this adapter to use an umbrella with a Bowens 500ws monolight.

Q: 2. Is this compatible with a Sekonic Litemaster Pro L-478DR using its own Pocketwizard transmitter? If not, can Pocketwizard receivers be connected to them to work?

A: If you are referring to the Sekonic LiteMaster Pro L-478DR-U-EL Series Light Meter for Elinchrom EL Skyport System, B&H # SEL478DRELU, then it would be fully compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit as packaged. If you instead own the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System, B&H # SEL478DRU, it would not be directly compatible for use with the Elinchrom D-Lite RX 4/4 Softbox To Go Kit. However, you may use the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System with the light kit by connecting the included Elinchrom EL-Skyport Transmitter Plus (B&H # ELSTP) to the synchro terminal on the bottom of the light meter with the Metz 36-50 Standard Sync Cord, B&H # ME5548. When you press the MEASURE button on the meter, it will trigger the transmitter connected via the cable and trigger your lights.If If you are using PocketWizard remotes with the Sekonic LiteMaster Pro L-478DR-U Light Meter for PocketWizard System and the light kit, the light meter will communicate directly with the PocketWizard remotes. However, you will have to connect the PocketWizard remotes to the Elinchrom monolight strobes via the 1/8 (3.5mm) sync terminal on the rear of the monolights via the PC sync cables included with the PocketWizard remotes. The PocketWizard remotes are not directly compatible with the Elinchrom Skyport receivers built into the light fixture, so they have to be connected via the sync cable. If you do not have a sync cable, the PocketWizard PC1N Locking PC Sync Cable (1'), B&H # WIPC1NPC, would work for your usage needs.

Q: 3. Is it right that it has an additional slot for bigger umbrella shafts? I want to use it with the Westcott Mega JS Apollo 50''x50''.

A: Yes it Does but is really flimsy/bad design

Q: 4. Will these lights work with the slave function if I fire a Phottix Indra 500 as my main light?

A: These lights do have an optical slave unit in each, so you can trigger them in line of sight with the Indra 500 as the master flash.

Q: 5. Hi. What is the GN for this strobe? I am looking to get a few for studio assignments which requires F8-F13 apertures.? I have a phottix Luna beauty dish i wish to mount on this strobe, is there a mount converter for it? what is the syn cable supplied: 3.5mm - PC? I'm using a pentax K3 so will have to sync using cable with RF603CII, will it work? Thanks in advance.

A: I don't remember the GN off hand, but it will most definitely handle the apertures you are mentioning. It's very powerful! You can get conversion mounts for it either at b&h or most definitely amazon. the sync cable supplied is what you also mentioned. but I'm not sure about the rf603cII. I use radio remote triggers (pocket wizards)

Q: 6. If used for zoom ring, does it have zoom speeds changes?

A: The motor of the SmallRig Wireless Follow Focus Lite Kit will react with the speed in which the control wheel on the handwheel controller is spun. In other words, the motor will spin the zoom ring as fast or slow as you spin the control wheel.

Q: 7. Does this kit work with Sony A7 cameras?

A: As long as that camera has a spot for an external flash to attach or plug in.

Q: 8. Can the power output be controlled remotely? I want to mount this about ten feet high so I don't want to have to lower it to adjust the output.

A: Yes, the power can be controlled by the Skyport Transmitter.

Q: 9. Hi , can i use it with Leica q ?

A: While you can use this kit with the Leica Q, it has not been tested to our knowledge. Your results may vary.

Q: 10. Does it also work with the Rotolight Elinchrom Skyport EL transmitter? (So not the Plus model) I'like to use it with Rotolights.

A: The Elinchrom D light RX One flash head does have A wireless receiver built in to the unit.