Da-Lite 70348 120X192" Cinema Contour Fixed Frame Screen

Da-lite 70348 120x192" Cinema Contour Fixed Frame Screen

Product Code: eq175188
Availability: In Stock

$6,338.40 $9,254.06

Qty

18 reviews Write a review

Description
Reviews (18)

The 70348 Cinema Contour Fixed Frame Screen by Da-Lite has a 120 x 192" viewing area, 16:10 aspect ratio, and 226" diagonal.

The Cinema Vision surface has a 1.3 gain and 90° viewing angle. It is designed to provide a higher amount of brightness for lower output projectors. Its increased reflectivity enhances brightness in situations where a moderate level of ambient light is present. This seamless surface is ideal for video images. Cinema Vision can be cleaned with mild soap and water and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification. Black backing on the back of the viewing surface prevents light bleed-through.

The aluminum frame is 3” wide by 1.63” and is covered with black Pro-Trim fabric, which absorbs excess light around the viewing area. The frame is slip-jointed at corners and joints. The screen also includes standard wall-mounting brackets.

226" Diagonal 16:10 Wide Format Cinema Vision Surface 1.3 Gain & 90° Viewing Angle Black Backing Retains Brightness Surface is Seamless 3" Wide Frame Pro-Trim Fabric Frame Covering

Parameters
Viewing Area	120 x 192" (305 x 488 cm)
Viewing Angle	90°
Gain	1.3
Nominal Diagonal	226" (574 cm)
Aspect Ratio	16:10
Surface	Cinema Vision
Overall Dimensions	126 x 198" (320 x 503 cm)
Shipping Weight	96 lb (43 kg)
Packaging Info
Package Weight	92 lb

45° angle cut frame

Flat viewing surface mounted on the back of an aluminum frame with masking or cropping border

Standard black backing retains projected brightness

Related Questions and Answers

Q: 1. Can you use a canon st e3 rt trigger to fire the strobes? Also is this alot more powerful than a 600 rt?

A: Most speed-lights are no more than 65 watts. The D-Lite RX One is 100 watts. It is around double the power. It does not work with the Canon ST-E3-RT Speedlite Transmitter. The built in receiver works with the Elinchrom - EL-Skyport Transmitter Plus and the Elinchrom EL-Skyport Transmitter Pro.

Q: 2. Is 14.8 Volts regulated for the Voltage of the GH5?

A: Yes, this dummy battery is specifically designed to work with the GH5 camera and it will provide the proper power needed.

Q: 3. Will this hold a 8mm rod?

A: Yes, the Manfrotto 026 Swivel Umbrella Adapter (Lite-Tite) is designed to hold the standard 8mm umbrella shaft.

Q: 4. Will D-Lite 400W/s Flash Heads connect with pocketwizard TT5 transceivers?

A: I would have to say yes. Just for the fact I do have this light and I use the pocket wizards on them. The TT 5, since it is a transceiver will transmit the signal to the light and allow it to activate, all you have to do is connect the cords from the transceiver to the light.I have not done it myself with the TT 5, but I am sure it will work. There should be connecting cords that came with the TT 5, if not B & H photo has them on stock. Just ask anyone in the lighting department and they will direct you to the proper cord that you will need to make things work. Let me know if this information helps you.

Q: 5. What is the total weight of the whole kit and the length of the bags?

A: We only have the spec including the retail box, 22lbs.

Q: 6. I'm trying to figure out what exactly this dummy battery does, why is it called "fixed voltage"? Can you connect to any source and it will provide to the camera the correct voltage? If not, what source would you use?

A: Fixed Voltage means it will provide only the proper voltage to power the cameras that use the NP-FW50 style Battery Pack. You can connect it to pretty much any D-Tap source.

Q: 7. Can the power output be controlled remotely? I want to mount this about ten feet high so I don't want to have to lower it to adjust the output.

A: Yes, the power can be controlled by the Skyport Transmitter.

Q: 8. Is there anywhere I can purchase a replacement stand socket?

A: A replacement stand socket can be purchased through Elinchrom directly. Please use the following for access to their parts and service page: http://bit.ly/1H3eFhi

Q: 9. Hi dear B&H friends. It comes for Sony Multi Interface Shoe, ie. A7, A7II, A7III, A60...? -Sergio- from PR

A: The Odin Lite is a Manual trigger. You can use it on any camera system including Sony.

Q: 10. Does this code with a multi empty case to add batteries?need power for extended shooting

A: The LanParte D-Tap to LP-E6 Fixed Voltage Battery Pack for Select Canon Cameras does not ship with batteries. You could add the following battery as s solution to power your camera with the Lanparte dummy battery. IndiPRO Tools Micro-Series 98Wh Li-Ion V-Mount Battery and D-Tap Pro Charger (2.5A) Kit BH #INPSKT25 https://bhpho.to/3iFMHHv

Justin	11/09/2024
[16:10] Great quality and look! It's a bit tricky to put together, but once it's up it's a gem 5

HOZ	05/09/2024
[1.3] EASY ASSEMBLY, GREAT PICTURE. ...GREAT PRICE....COULD NOT BE MORE PLEASED 5

S_Kim	29/08/2024
[92 lb] I have used this Da-Lite screen for the past 3+ years. This is actually my second purchase. Compared to some brands and products, the price is reasonable. The design is solid, great for portable use and easy to setup. However, it weights close to 70 pounds. A great product nonetheless. 5

Junia	13/08/2024
[96 lb (43 kg)] Very easy to assemble. For ambient lit rooms, this screen is very very good! 5

iJam	09/08/2024
[1.3] From an installers point of view, this screen really is nice. Install a top and bottom rail and the screen slides over the rails for an easy installation. The screen snaps to the rear of the frame for a very tidy and clean cut appearance. High quality frame, packaged well, easy to install... a good deal all the way around. 5

Tedsnap	07/08/2024
[90°] Well packaged. Easy to assemble. System tensions screen perfectly for a no-sag presentation. 5

Chip	03/08/2024
[1.3] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5

Jonathan	15/07/2024
[96 lb (43 kg)] This screen looks beautiful, is simple to assemble, and is an amazing value for the price! I couldn't be happierwith it. The frame looks clean and professional, and the screen is perfectly smooth- no awkward stretch or wrinkles. My only critique is it's a little difficult to make the corners align perfectly. I ended up with maybe half a millimeter gap on one corner, but you would have to look very closely to notice that. Otherwise the design is flawless. Impressively well engineered design with a minimal number of parts. I almost never leave reviews for products, but I am legitimately impressed with this product. I wouldn't want its lack of prior reviews to dissuade anyone from trying it out. 5

haze_1	03/07/2024
[16:10] I use it in a classroom at a university. It's got a great surface, brilliant white, big and more than I expected. It looks like a big LCD screen on the wall, way cool. 5

Peter	01/07/2024
[92 lb] Have this 8' 16x9 installed in the front of the church sanctuary replacing an 8' 4x3 with the standard wide bezel. The narrow 1/4 bezel looks great. Quality and attention to detail in this screen is impressive. It was simple to assemble and install. 5