You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Canare Male To Right Angle Male Hd-sdi Video Cable 35'

Canare Male To Right Angle Male Hd-sdi Video Cable 35'
  • Product Code: eq175258
  • Availability: In Stock

$209.85 $285.40

The black Canare Male to Right Angle Male HD-SDI Video Cable 35'is a 35' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

General
Connector 11x BNC
Connector 21x BNC
Coaxial TypeRG-6
Cable Length35' / 10 m
Interface12G-SDI
SMPTE StandardsSMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge18 AWG
Weight2.2 lb / 1 kg
Packaging Info
Package Weight2.1 lb
Box Dimensions (LxWxH)7.9 x 7.2 x 1.4"

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Will this work connected to 2 Rode receivers (so I want to record 4 transmitters), to my Sony A7R5, (4 channels of audio)?

A: The RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable is designed for connecting the mono outputs of two devices and sending it to separate channels on a device with a single 3.5mm TRS mic input. The SC11 will carry only two channels of audio. It can be used to connect the mono (combined) output signal from two dual-channel wireless receivers, like the RODE Wireless GO II Microphone System, to the mic input on a camera such as the Sony a7R V Mirrorless Camera. The audio carried by the cable will have the combined audio from one system on the left side and the combined audio the second system on the right side.

Q: 2. Can I connect it to a power bank with a 12V 2.5mm barrel output?

A: This cable is designed specifically to work Tilta Battery plates that have the needed 2.5mm barrel output such as BH #TIBT003A. We are not aware of how well it might work with non-Tilta products. https://bhpho.to/2Qpm75i

Q: 3. Can this cable connect the output of a Rode Wireless Go 2 Receiver to 2 mono XLR inputs with VXLR, VXLR+ or VXLR Pro adapters?

A: You can use the RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable with two RODE VXLR 3.5mm TRS Female to XLR Male Adapters (B&H # ROVXLR), but a simpler and less expensive option would be to use a cable like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 10' (B&H # KOSMYCM2XM10).

Q: 4. Does any smartphone (I have the Pixel 3a XL) would recognize a microphone signal being input through the USB terminal?

A: Yes, but it has to be a powered microphone, like a wireless receiver or AA powered mic. Plug-in powered mics will not work with this cable. You may have select external mic in your video or audio app, but most will recognize it as an external mic if you have it connected when you start the app.

Q: 5. Would this cable work with connecting an UltraSync One to a bmpcc 6k? Then, to confirm, I would need another UltraSync One connected to a Zoom F8n, which would utilize the BNC to Atomos LTC? Thanks in advance.

A: Yes, the Atomos LTC to Right-Angle 3.5mm Mic-Level Timecode Cable will work to connect an UltraSync One to a BMPCC to send timecode, then you can use a cable like the Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (B&H # ATOMXCAB01) for the Zoom F8n. Once the UltraSync One is synced with the device, timecode is embedded in the recorded files and can be recognized by industry-standard software and NLEs (non-linear editors).

Q: 6. Would this be able to power the Atomos Ninja V using the included battery eliminator running off of the IndiPRO Micro Alpha Series 99Wh V-Mount Li-Ion Battery?

A: Yes, the following cable will work to power a Atomos ninja V. I would suggest looking into the following brand to power up you display. https://bhpho.to/3AIiDhJ

Q: 7. Would this work with smallhd Indie 7 locking barrel?

A: Smallhd recommends using their D-Tap to 5.5mm Male DC Barrel Power Cable (3') for use with the Smallhd Indie 7. https://www.bhphotovideo.com/c/product/1154925-REG/smallhd_cbl_pwr_dtap_bar_36_d_tap_adapter_cable.html/qa

Q: 8. will this work with Blackmagic 7" 12g video assist monitor?

A: No, the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") is not the correct size barrel, as the Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor has a 5.5 x 2.5mm DC input. You can use the DigitalFoto Solution Limited D-Tap to 5.5 x 2.5mm DC Barrel Power Cable (36.4") instead. See: https://bhpho.to/2OYfRCg

Q: 9. Tilta TA-BTP-F970 NP-F970 Battery Plate

A: It is compatible.

Q: 10. Will this adapter fit on a 5/8" light stand? Will the opening in the bottom fit over a light stand stud? Is that a threaded hole at the bottom side that I can attach a knob?

A: This adapter would not fit over a 5/8" stud on a light stand. A better option for this is the Avenger E390 TVMP Yoke to Stand Adapter, BH # AVE390. http://bhpho.to/3mKtX5z

13/09/2024

[18 AWG] The flexibility of this cable helps greatly when setting up for a show.

5
08/09/2024

[2.1 lb] This cable is a little pricey, but I find you get what you pay for with cables. I have a PTZ camera that needed to be tucked tightly in a corner for a project and this cable worked perfect by giving me that extra inch or so I needed push back in the corner as much as possible. Almost all my cables are Canare brand and I've always found them to be highly reliable.

5
01/08/2024

[1x BNC] Bulky, not very flexible, but it is built like a tank and has a right angle on one end.


All this 12G cable talk made me worried and I use this on everything except gimbal work.

5
01/08/2024

[1x BNC] I use this to feed signal to my Inferno, it is a good, sturdy build and works great.

5
06/07/2024

[1x BNC] I was looking for a flexible cable with a 90 degree adapter to use with my Blackmagic camera (to reduce the mechanical stress on the camera connectors). These do the job well.

5
29/06/2024

[18 AWG] Among the best quality BNC cables on the market.

5
24/06/2024

[1x BNC] Love canare cables. Been using their connectors since the 80's. high quality. Have 2 200 ft multi channel UHD SDI snakes. 90 ends work great on rack.

5
03/06/2024

[1x BNC] Works great with 4K workflow. Cables are very flexible and appear to be rugged as well.

5
29/05/2024

[1x BNC] SDI is easily spooled. 90 degree connection is the way to go so you don't snap straight connections into camera.

5
22/05/2024

[2.1 lb] The flexibility of this cable helps greatly when setting up for a show.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Cartoni Stabilo 75mm Carbon Fiber Tripod

$4,326.00 $6,791.82

Products You May Like

Ceiling Track Fabric Projector Screen

$2,736.00 $3,830.40

Sunbritetv Veranda 55" Hdr 4k Uhd Outdoor Led Tv

$5,306.85 $8,172.55

Benq Mw826st Projector Lamp 5j.jge05.001

$296.25 $373.27

Rme Multi Remote Control For Smart Devices

$207.00 $275.31

Soundtube Rs800i 8" Open-ceiling Speaker

$1,572.60 $2,248.82

Auray Rm-mcled Multicolor Led Rack Light

$239.97 $292.76

Hp 3-year On-site Support Media Retention

$98.85 $127.52