Canare Male To Right Angle Male Hd-Sdi Video Cable 175'

Canare Male To Right Angle Male Hd-sdi Video Cable 175'

Product Code: eq175263
Availability: In Stock

$673.50 $821.67

Qty

14 reviews Write a review

Description
Reviews (14)

The black Canare Male to Right Angle Male HD-SDI Video Cable 175'is a 175' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable BNC Male to Right Angle Male Connectors Solid Copper Center Conductor Foam PE Dielectric Insulation Dual Copper Braid 100% Sweep Tested

General
Connector 1	1x BNC
Connector 2	1x BNC
Coaxial Type	RG-6
Cable Length	175' / 53 m
Interface	12G-SDI
SMPTE Standards	SMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge	18 AWG
Weight	11.2 lb / 5.1 kg

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. will this work with Blackmagic 7" 12g video assist monitor?

A: No, the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") is not the correct size barrel, as the Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor has a 5.5 x 2.5mm DC input. You can use the DigitalFoto Solution Limited D-Tap to 5.5 x 2.5mm DC Barrel Power Cable (36.4") instead. See: https://bhpho.to/2OYfRCg

Q: 2. What are the dimensions of the right angle connector?

A: Approximately 1'' x .5''.

Q: 3. would this power the feelworld f6 plus safly when plugged into the dtap port from the smallrig 99w v mount battery?

A: No, you won't be able to fully insert the DC barrel from the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") into the FeelWorld F6 Plus 5.5" 4K HDMI Monitor since the monitor does not have a locking connector. Consider the Watson Pro D-Tap to 2.1mm Barrel Cable (19") as an alternative cable. The monitor accepts voltages between 7 to 24 volts. See the link below: https://bhpho.to/3zjOvuz

Q: 4. is this compatible with Nikon D5?

A: This cable won't work with the Nikon D5. You'll need a Mini-HDMI cable.

Q: 5. Can it work with any timecode box?

A: The Tentacle Sync C07 Tentacle to DSLR 3.5mm Mini-Jack Cable is designed to send timecode from a Tentacle Sync timecode generator to any DSLR camera or recorder that includes a 3.5mm TRS input jack. This cable should also work with other timecode generators that use a 3.5mm TRS timecode output connection to send timecode to a camera or recorder that has a 3.5mm TRS input.

Q: 6. Does it work with any photo software on Mac or APP on iPad Pro 12.9 2022?

A: The Tether Tools TetherPro USB Type-C Male to Micro-USB 3.0 Type B Male Cable (15', Black, Right-Angle) will support tethering a supported camera with a Micro-USB 3.0 Type B port to an iPad in an app that supports camera tethering, such as Lightroom or Capture One.

Q: 7. Will this adapter fit on a 5/8" light stand? Will the opening in the bottom fit over a light stand stud? Is that a threaded hole at the bottom side that I can attach a knob?

A: This adapter would not fit over a 5/8" stud on a light stand. A better option for this is the Avenger E390 TVMP Yoke to Stand Adapter, BH # AVE390. http://bhpho.to/3mKtX5z

Q: 8. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.

Q: 9. Would this be able to power the Atomos Ninja V using the included battery eliminator running off of the IndiPRO Micro Alpha Series 99Wh V-Mount Li-Ion Battery?

A: Yes, the following cable will work to power a Atomos ninja V. I would suggest looking into the following brand to power up you display. https://bhpho.to/3AIiDhJ

Q: 10. Tilta TA-BTP-F970 NP-F970 Battery Plate

A: It is compatible.

Stephen	26/09/2024
[1x BNC] I use this to feed signal to my Inferno, it is a good, sturdy build and works great. 5

Robert	26/09/2024
[RG-6] They are stiff compared to other cables, but I have a bunch of these and they have, to date, NEVER let me down. 5

Vegavision	21/09/2024
[18 AWG] Construccin robusta y de el largo perfecto, producto muy confiable de la mejor calidad. Lo uso para el grabador Odyssey 7Q con la Sony FS700R. 5

Gary	15/09/2024
[RG-6] This is absolutely the best cable ever that has both a straight and a 90 degree connector. How did we ever live without this? I pity the poor people who have only two straight connectors. Their lives must just be so miserable not having a 90 degree connector available to them. Seriously, it's a cable, seems well built, it works fine and it comes in a variety of colors which is good for organization/tracing if you need to do that. The 90 degree is handy in some cases for cable management or less stress on a connector. At the end of the day it's a cable that works. What more do you want... 5

Robert	12/09/2024
[1x BNC] Bulky, not very flexible, but it is built like a tank and has a right angle on one end. All this 12G cable talk made me worried and I use this on everything except gimbal work. 5

James	02/09/2024
[1x BNC] The flexibility of this cable helps greatly when setting up for a show. 5

Nathan	16/08/2024
[1x BNC] Works great with 4K workflow. Cables are very flexible and appear to be rugged as well. 5

Arnold	16/06/2024
[1x BNC] This cable is a little pricey, but I find you get what you pay for with cables. I have a PTZ camera that needed to be tucked tightly in a corner for a project and this cable worked perfect by giving me that extra inch or so I needed push back in the corner as much as possible. Almost all my cables are Canare brand and I've always found them to be highly reliable. 5

Chris	07/06/2024
[1x BNC] We only use g drives for spinning disc drives. Rock solid. Coming up on 10 years of flawless service. Over 60 TB of storage 5