The blue Canare Male to Right Angle Male HD-SDI Video Cable 1' Blueis a 1' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Tilta TA-BTP-F970 NP-F970 Battery Plate

A: It is compatible.

Q: 2. Does this regulate to 12 volts?

A: This does not regulate power. You use it with devices that self regulate.

Q: 3. Is this cable compatible with a Canon 1DX Mark II?

A: Yes

Q: 4. will this work with Blackmagic 7" 12g video assist monitor?

A: No, the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") is not the correct size barrel, as the Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor has a 5.5 x 2.5mm DC input. You can use the DigitalFoto Solution Limited D-Tap to 5.5 x 2.5mm DC Barrel Power Cable (36.4") instead. See: https://bhpho.to/2OYfRCg

Q: 5. This is for connecting my pocket wizard to my Profoto light. I usually use the PocketWizard MM1 Flash Sync Cable Mono Miniphone to Mono Miniphone but they are back-ordered. Will these work?

A: This Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable (Right Angle 12") BH #TEC07 is a stereo TRS cable and is not electrically configured like a mono TS cable would be. Here is a 16" flash sync cord cable: Nisha Miniphone 1/8" (3.5mm) Male to Miniphone 1/8" (3.5mm) Male Sync Cord (16") B&H # NIFSC163535 MFR # FSC163535

Q: 6. Would this be able to power the Atomos Ninja V using the included battery eliminator running off of the IndiPRO Micro Alpha Series 99Wh V-Mount Li-Ion Battery?

A: Yes, the following cable will work to power a Atomos ninja V. I would suggest looking into the following brand to power up you display. https://bhpho.to/3AIiDhJ

Q: 7. would this power the feelworld f6 plus safly when plugged into the dtap port from the smallrig 99w v mount battery?

A: No, you won't be able to fully insert the DC barrel from the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") into the FeelWorld F6 Plus 5.5" 4K HDMI Monitor since the monitor does not have a locking connector. Consider the Watson Pro D-Tap to 2.1mm Barrel Cable (19") as an alternative cable. The monitor accepts voltages between 7 to 24 volts. See the link below: https://bhpho.to/3zjOvuz

Q: 8. Will this cable work for zoom f6 timecode with track e?

A: Yes, the Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable could be used to send timecode signal between the Tentacle Sync TRACK E and the Zoom F6 Multitrack Field Recorder.

Q: 9. is this compatible with Nikon D5?

A: This cable won't work with the Nikon D5. You'll need a Mini-HDMI cable.

Q: 10. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.