The blue Canare Male to Right Angle Male HD-SDI Cable 2' Blueis a 2' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Can it work with any timecode box?

A: The Tentacle Sync C07 Tentacle to DSLR 3.5mm Mini-Jack Cable is designed to send timecode from a Tentacle Sync timecode generator to any DSLR camera or recorder that includes a 3.5mm TRS input jack. This cable should also work with other timecode generators that use a 3.5mm TRS timecode output connection to send timecode to a camera or recorder that has a 3.5mm TRS input.

Q: 2. will this work with Blackmagic 7" 12g video assist monitor?

A: No, the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") is not the correct size barrel, as the Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor has a 5.5 x 2.5mm DC input. You can use the DigitalFoto Solution Limited D-Tap to 5.5 x 2.5mm DC Barrel Power Cable (36.4") instead. See: https://bhpho.to/2OYfRCg

Q: 3. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.

Q: 4. is this compatible with Nikon D5?

A: This cable won't work with the Nikon D5. You'll need a Mini-HDMI cable.

Q: 5. Hi! Tether Block and Micro-USB 3.0 Type-B Male, Orange, Right-Angle-- is this compatible with Canon 5DSR?

A: Yes, the Tether Tools TetherPro USB Cable with TetherBLOCK Mounting Plate Kit (USB Type-C Male to Micro-USB 3.0 Type-B Male, Orange, Right-Angle) BH #TECUC33R15OP (B&H Kit) is compatible with the Canon 5DS R.

Q: 6. Would this cable work with connecting an UltraSync One to a bmpcc 6k? Then, to confirm, I would need another UltraSync One connected to a Zoom F8n, which would utilize the BNC to Atomos LTC? Thanks in advance.

A: Yes, the Atomos LTC to Right-Angle 3.5mm Mic-Level Timecode Cable will work to connect an UltraSync One to a BMPCC to send timecode, then you can use a cable like the Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (B&H # ATOMXCAB01) for the Zoom F8n. Once the UltraSync One is synced with the device, timecode is embedded in the recorded files and can be recognized by industry-standard software and NLEs (non-linear editors).

Q: 7. Will this adapter fit on a 5/8" light stand? Will the opening in the bottom fit over a light stand stud? Is that a threaded hole at the bottom side that I can attach a knob?

A: This adapter would not fit over a 5/8" stud on a light stand. A better option for this is the Avenger E390 TVMP Yoke to Stand Adapter, BH # AVE390. http://bhpho.to/3mKtX5z

Q: 8. Will this cable work for zoom f6 timecode with track e?

A: Yes, the Tentacle Sync Tentacle to DSLR 3.5mm Mini-Jack Cable could be used to send timecode signal between the Tentacle Sync TRACK E and the Zoom F6 Multitrack Field Recorder.

Q: 9. Does this regulate to 12 volts?

A: This does not regulate power. You use it with devices that self regulate.

Q: 10. Will this work in combination with the CAMVATE LP-E12 dummy battery when used with the Canon M50? I'm concerned about barrel size compatibility as well as the access hole on the bottom of the camera.

A: The 2.1/5.5mm end of the Kondor Blue 1.35/3.5mm to 2.1/5.5mm DC Male Coiled Power Cable can connect to the 2.1mm female barrel end on the CAMVATE LP-E12 Dummy Battery to 2.1mm Female Barrel Cable for Select Canon Cameras. The female barrel cable provided with the CAMVATE LP-E12 Dummy Battery to 2.1mm Female Barrel Cable for Select Canon Cameras should pass through a compatible camera battery door.