The blue Canare Male to Right Angle Male HD-SDI Video Cable 75'is a 75' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. will this work with Blackmagic 7" 12g video assist monitor?

A: No, the IndiPRO Tools D-Tap to Locking 2.1mm DC Right-Angle Cable (24") is not the correct size barrel, as the Blackmagic Design Video Assist 7" 12G-SDI/HDMI HDR Recording Monitor has a 5.5 x 2.5mm DC input. You can use the DigitalFoto Solution Limited D-Tap to 5.5 x 2.5mm DC Barrel Power Cable (36.4") instead. See: https://bhpho.to/2OYfRCg

Q: 2. Is this cable compatible with a Canon 6D Mark II?

A: No the right cable would be https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html

Q: 3. Will this work with Nikon D850?

A: YES it will work with the D850- but I recommend getting the 'right angle' version. And more importantly get the TetherBLOCK QR Plus Quick Release Plate. B&H # TETBQR004G MFR # TB-QR-004GThat way you're not gaffe taping the cable to the camera body- or yanking out the cable by accident- and it helps extend the life of the USB port of the camera body by not adding pulling stress to the port.

Q: 4. Can this be used with the Blind Spot Power Junkie?

A: Not that we are aware of. This connection is for Tilta products. For the Blind Spot Power Junkie we can suggest BH #BLBSG1302901 instead, which is the Canon LP-E6 dummy battery option. This will work to power the Pocket Cinema Camera 4K from the Blind Spot Power Junkie. https://bhpho.to/39hdCyS

Q: 5. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.

Q: 6. Would this work with smallhd Indie 7 locking barrel?

A: Smallhd recommends using their D-Tap to 5.5mm Male DC Barrel Power Cable (3') for use with the Smallhd Indie 7. https://www.bhphotovideo.com/c/product/1154925-REG/smallhd_cbl_pwr_dtap_bar_36_d_tap_adapter_cable.html/qa

Q: 7. Does this regulate to 12 volts?

A: This does not regulate power. You use it with devices that self regulate.

Q: 8. What are the dimensions of the right angle connector?

A: Approximately 1'' x .5''.

Q: 9. Could this power a BMPCC 6K G2 from a SmallRig V-Mount adapter plate (#SM3203B)?

A: As the Tilta 2.5mm DC Male Barrel Power Cable for BMPCC 4K (17.2") is a 2.5mm sized barrel which matches the 12V barrel size on the SmallRig V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp, BH #SM3203B, it should be compatible.

Q: 10. Can I use this to connect an Atomos AtomX Sony L-Series Type Battery Eliminator on an Atomos Ninja V to a V mount setup?

A: No, barrel will not fit its a 5.5/2.5 mm dc cable.