Canare Male To Right Angle Male Hd-Sdi Cable 100Ft Blue

Canare Male To Right Angle Male Hd-sdi Cable 100ft Blue

Product Code: eq175284
Availability: In Stock

$419.85 $629.77

Qty

10 reviews Write a review

Description
Reviews (10)

The blue Canare Male to Right Angle Male HD-SDI Cable 100ft Blueis a 100' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable BNC Male to Right Angle Male Connectors Solid Copper Center Conductor Foam PE Dielectric Insulation Dual Copper Braid 100% Sweep Tested

General
Connector 1	1x BNC
Connector 2	1x BNC
Coaxial Type	RG-6
Cable Length	100' / 30.5 m
Interface	12G-SDI
SMPTE Standards	SMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge	18 AWG
Weight	6.4 lb / 2.9 kg
Packaging Info
Package Weight	6 lb
Box Dimensions (LxWxH)	10.1 x 9.3 x 2.6"

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Does this regulate to 12 volts?

A: This does not regulate power. You use it with devices that self regulate.

Q: 2. Will this work in combination with the CAMVATE LP-E12 dummy battery when used with the Canon M50? I'm concerned about barrel size compatibility as well as the access hole on the bottom of the camera.

A: The 2.1/5.5mm end of the Kondor Blue 1.35/3.5mm to 2.1/5.5mm DC Male Coiled Power Cable can connect to the 2.1mm female barrel end on the CAMVATE LP-E12 Dummy Battery to 2.1mm Female Barrel Cable for Select Canon Cameras. The female barrel cable provided with the CAMVATE LP-E12 Dummy Battery to 2.1mm Female Barrel Cable for Select Canon Cameras should pass through a compatible camera battery door.

Q: 3. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.

Q: 4. Can it work with any timecode box?

A: The Tentacle Sync C07 Tentacle to DSLR 3.5mm Mini-Jack Cable is designed to send timecode from a Tentacle Sync timecode generator to any DSLR camera or recorder that includes a 3.5mm TRS input jack. This cable should also work with other timecode generators that use a 3.5mm TRS timecode output connection to send timecode to a camera or recorder that has a 3.5mm TRS input.

Q: 5. Hi, will this work with charging and data transfer for a Samsung Galaxy S5?

A: Diana, this is not what are u looking for. You need a mini USB 2.0.

Q: 6. Will this work with Nikon D850?

A: YES it will work with the D850- but I recommend getting the 'right angle' version. And more importantly get the TetherBLOCK QR Plus Quick Release Plate. B&H # TETBQR004G MFR # TB-QR-004GThat way you're not gaffe taping the cable to the camera body- or yanking out the cable by accident- and it helps extend the life of the USB port of the camera body by not adding pulling stress to the port.

Q: 7. Would this cable work with connecting an UltraSync One to a bmpcc 6k? Then, to confirm, I would need another UltraSync One connected to a Zoom F8n, which would utilize the BNC to Atomos LTC? Thanks in advance.

A: Yes, the Atomos LTC to Right-Angle 3.5mm Mic-Level Timecode Cable will work to connect an UltraSync One to a BMPCC to send timecode, then you can use a cable like the Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (B&H # ATOMXCAB01) for the Zoom F8n. Once the UltraSync One is synced with the device, timecode is embedded in the recorded files and can be recognized by industry-standard software and NLEs (non-linear editors).

Q: 8. Tilta TA-BTP-F970 NP-F970 Battery Plate

A: It is compatible.

Q: 9. What are the dimensions of the right angle connector?

A: Approximately 1'' x .5''.

Q: 10. Will this work with Tilta's side power handles?

A: The Tilta 2.5mm DC Male Barrel Power Cable will not work with the Tilta Side Power Handles as it does not have an barrel port for powering, only USB for the Nucleus motors.

Arnold	05/09/2024
[1x BNC] This cable is a little pricey, but I find you get what you pay for with cables. I have a PTZ camera that needed to be tucked tightly in a corner for a project and this cable worked perfect by giving me that extra inch or so I needed push back in the corner as much as possible. Almost all my cables are Canare brand and I've always found them to be highly reliable. 5

James	02/08/2024
[1x BNC] The flexibility of this cable helps greatly when setting up for a show. 5

Teacher	02/08/2024
[18 AWG] SDI is easily spooled. 90 degree connection is the way to go so you don't snap straight connections into camera. 5

Chris	09/07/2024
[18 AWG] Love canare cables. Been using their connectors since the 80's. high quality. Have 2 200 ft multi channel UHD SDI snakes. 90 ends work great on rack. 5

Vegavision	22/06/2024
[RG-6] Construccin robusta y de el largo perfecto, producto muy confiable de la mejor calidad. Lo uso para el grabador Odyssey 7Q con la Sony FS700R. 5

Robert	22/06/2024
[1x BNC] They are stiff compared to other cables, but I have a bunch of these and they have, to date, NEVER let me down. 5

James	12/06/2024
[6 lb] The flexibility of this cable helps greatly when setting up for a show. 5

Robert	09/06/2024
[18 AWG] Bulky, not very flexible, but it is built like a tank and has a right angle on one end. All this 12G cable talk made me worried and I use this on everything except gimbal work. 5