Canare Male To Right Angle Male Hd-Sdi Cable 125' Blue

Canare Male To Right Angle Male Hd-sdi Cable 125' Blue

Product Code: eq175285
Availability: In Stock

$505.50 $621.76

Qty

15 reviews Write a review

Description
Reviews (15)

The blue Canare Male to Right Angle Male HD-SDI Cable 125' Blueis a 125' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable BNC Male to Right Angle Male Connectors Solid Copper Center Conductor Foam PE Dielectric Insulation Dual Copper Braid 100% Sweep Tested

General
Connector 1	1x BNC
Connector 2	1x BNC
Coaxial Type	RG-6
Cable Length	125' / 38 m
Interface	12G-SDI
SMPTE Standards	SMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge	18 AWG
Weight	8 lb / 3.6 kg

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. What are the dimensions of the right angle connector?

A: Approximately 1'' x .5''.

Q: 2. Will this work with the Dji RS2?

A: The DJI RS2 does not have a 2-pin LEMO port, nor a DC port.

Q: 3. Will this work with Tilta's side power handles?

A: The Tilta 2.5mm DC Male Barrel Power Cable will not work with the Tilta Side Power Handles as it does not have an barrel port for powering, only USB for the Nucleus motors.

Q: 4. Would this work with smallhd Indie 7 locking barrel?

A: Smallhd recommends using their D-Tap to 5.5mm Male DC Barrel Power Cable (3') for use with the Smallhd Indie 7. https://www.bhphotovideo.com/c/product/1154925-REG/smallhd_cbl_pwr_dtap_bar_36_d_tap_adapter_cable.html/qa

Q: 5. Does this regulate to 12 volts?

A: This does not regulate power. You use it with devices that self regulate.

Q: 6. Could this power a BMPCC 6K G2 from a SmallRig V-Mount adapter plate (#SM3203B)?

A: As the Tilta 2.5mm DC Male Barrel Power Cable for BMPCC 4K (17.2") is a 2.5mm sized barrel which matches the 12V barrel size on the SmallRig V-Mount Battery Adapter Plate with Dual 15mm Rod Clamp, BH #SM3203B, it should be compatible.

Q: 7. Is this cable compatible with a Canon 6D Mark II?

A: No the right cable would be https://www.bhphotovideo.com/c/product/845393-REG/Tether_Tools_CU5451_15_4_6_m_TetherPro.html

Q: 8. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.

Q: 9. Will this work connected to 2 Rode receivers (so I want to record 4 transmitters), to my Sony A7R5, (4 channels of audio)?

A: The RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable is designed for connecting the mono outputs of two devices and sending it to separate channels on a device with a single 3.5mm TRS mic input. The SC11 will carry only two channels of audio. It can be used to connect the mono (combined) output signal from two dual-channel wireless receivers, like the RODE Wireless GO II Microphone System, to the mic input on a camera such as the Sony a7R V Mirrorless Camera. The audio carried by the cable will have the combined audio from one system on the left side and the combined audio the second system on the right side.

Q: 10. Is it compatible with the BMPCC 6K?

A: Yes it should be. The Pocket Cinema Camera 4K and 6K share the same power connections.

Gary	12/09/2024
[RG-6] This is absolutely the best cable ever that has both a straight and a 90 degree connector. How did we ever live without this? I pity the poor people who have only two straight connectors. Their lives must just be so miserable not having a 90 degree connector available to them. Seriously, it's a cable, seems well built, it works fine and it comes in a variety of colors which is good for organization/tracing if you need to do that. The 90 degree is handy in some cases for cable management or less stress on a connector. At the end of the day it's a cable that works. What more do you want... 5

Derek	05/09/2024
[1x BNC] Among the best quality BNC cables on the market. 5

James	19/08/2024
[RG-6] The flexibility of this cable helps greatly when setting up for a show. 5

Arnold	14/08/2024
[1x BNC] This cable is a little pricey, but I find you get what you pay for with cables. I have a PTZ camera that needed to be tucked tightly in a corner for a project and this cable worked perfect by giving me that extra inch or so I needed push back in the corner as much as possible. Almost all my cables are Canare brand and I've always found them to be highly reliable. 5

Robert	12/08/2024
[1x BNC] They are stiff compared to other cables, but I have a bunch of these and they have, to date, NEVER let me down. 5

Stephen	21/07/2024
[18 AWG] I use this to feed signal to my Inferno, it is a good, sturdy build and works great. 5

James	29/06/2024
[RG-6] The flexibility of this cable helps greatly when setting up for a show. 5

Kenneth	28/06/2024
[1x BNC] I was looking for a flexible cable with a 90 degree adapter to use with my Blackmagic camera (to reduce the mechanical stress on the camera connectors). These do the job well. 5

Sean Quigley	23/06/2024
[1x BNC] Good quality, really snug and tight connectors. Perfect for connecting my Small HD monitor to my RED Komodo. 5

Chris	04/06/2024
[RG-6] We only use g drives for spinning disc drives. Rock solid. Coming up on 10 years of flawless service. Over 60 TB of storage 5