The blue Canare Male to Right Angle Male HD-SDI Cable 200' Blueis a 200' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Can this be used to power the blackmagic PCC4K using the DC power out on a Zhiyun Crane 2?

A: Not that we are aware of. This product is meant to be used with Tilta battery plates and battery baseplates only.

Q: 2. Can this be used with the Blind Spot Power Junkie?

A: Not that we are aware of. This connection is for Tilta products. For the Blind Spot Power Junkie we can suggest BH #BLBSG1302901 instead, which is the Canon LP-E6 dummy battery option. This will work to power the Pocket Cinema Camera 4K from the Blind Spot Power Junkie. https://bhpho.to/39hdCyS

Q: 3. Would this work with smallhd Indie 7 locking barrel?

A: Smallhd recommends using their D-Tap to 5.5mm Male DC Barrel Power Cable (3') for use with the Smallhd Indie 7. https://www.bhphotovideo.com/c/product/1154925-REG/smallhd_cbl_pwr_dtap_bar_36_d_tap_adapter_cable.html/qa

Q: 4. Works with the Tilta Sony F970 Battery Baseplate for the 7.4V port?

A: If you are referring to the Tilta Sony F970 Battery Plate for BMPCC 4K Camera Cage, BH #TITABTPF970G, Tilta recommends cables with a 2.5mm barrel. You would need BH #TIDBLPE6DC25 instead.

Q: 5. Will this work with Nikon D850?

A: YES it will work with the D850- but I recommend getting the 'right angle' version. And more importantly get the TetherBLOCK QR Plus Quick Release Plate. B&H # TETBQR004G MFR # TB-QR-004GThat way you're not gaffe taping the cable to the camera body- or yanking out the cable by accident- and it helps extend the life of the USB port of the camera body by not adding pulling stress to the port.

Q: 6. Is this the right cable for my Sony a9 and MacBook pro 2017?

A: Yes this is the correct cable.

Q: 7. Can this cable connect a BMPCC 6k to a Rhino Arc II?

A: This cable is intended for power and is not a control cable.

Q: 8. Is this cable right for Canon EOS 1 DX Mark II?

A: Yes, this cable will work for the camera.

Q: 9. Can it work with any timecode box?

A: The Tentacle Sync C07 Tentacle to DSLR 3.5mm Mini-Jack Cable is designed to send timecode from a Tentacle Sync timecode generator to any DSLR camera or recorder that includes a 3.5mm TRS input jack. This cable should also work with other timecode generators that use a 3.5mm TRS timecode output connection to send timecode to a camera or recorder that has a 3.5mm TRS input.

Q: 10. is it works with Nikon D800E?

A: Yes it works just fine.