The green Canare Male to Right Angle Male HD-SDI Cable 1' Greenis a 1' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Is it compatible with the BMPCC 6K?

A: Yes it should be. The Pocket Cinema Camera 4K and 6K share the same power connections.

Q: 2. Would this work with smallhd Indie 7 locking barrel?

A: Smallhd recommends using their D-Tap to 5.5mm Male DC Barrel Power Cable (3') for use with the Smallhd Indie 7. https://www.bhphotovideo.com/c/product/1154925-REG/smallhd_cbl_pwr_dtap_bar_36_d_tap_adapter_cable.html/qa

Q: 3. Would this cable work with connecting an UltraSync One to a bmpcc 6k? Then, to confirm, I would need another UltraSync One connected to a Zoom F8n, which would utilize the BNC to Atomos LTC? Thanks in advance.

A: Yes, the Atomos LTC to Right-Angle 3.5mm Mic-Level Timecode Cable will work to connect an UltraSync One to a BMPCC to send timecode, then you can use a cable like the Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (B&H # ATOMXCAB01) for the Zoom F8n. Once the UltraSync One is synced with the device, timecode is embedded in the recorded files and can be recognized by industry-standard software and NLEs (non-linear editors).

Q: 4. Is this cable right for Canon EOS 1 DX Mark II?

A: Yes, this cable will work for the camera.

Q: 5. Does this work with the Canon EOS R5???

A: No, this Tether Tools TetherPro USB 3.0 Male Type-A to USB 3.0 Micro-B Cable will not work with the Canon EOS R5. You will need a USB-C cable instead.

Q: 6. Is this the right cable for my Sony a9 and MacBook pro 2017?

A: Yes this is the correct cable.

Q: 7. Can I use this to connect an Atomos AtomX Sony L-Series Type Battery Eliminator on an Atomos Ninja V to a V mount setup?

A: No, barrel will not fit its a 5.5/2.5 mm dc cable.

Q: 8. Is it regulated?

A: no this dummy battery is not regulated

Q: 9. Can it work with any timecode box?

A: The Tentacle Sync C07 Tentacle to DSLR 3.5mm Mini-Jack Cable is designed to send timecode from a Tentacle Sync timecode generator to any DSLR camera or recorder that includes a 3.5mm TRS input jack. This cable should also work with other timecode generators that use a 3.5mm TRS timecode output connection to send timecode to a camera or recorder that has a 3.5mm TRS input.

Q: 10. Can this be used to power the blackmagic PCC4K using the DC power out on a Zhiyun Crane 2?

A: Not that we are aware of. This product is meant to be used with Tilta battery plates and battery baseplates only.