Da-Lite 20325Ebi Tensioned Advantage Deluxe Electrol Screen

Da-lite 20325ebi Tensioned Advantage Deluxe Electrol Screen

Product Code: eq175301
Availability: In Stock

$2,928.00 $4,362.72

Qty

7 reviews Write a review

Description
Reviews (7)

The 220V Da-Lite 20325EBI Tensioned Advantage Deluxe Electrol Screen(fabric, roller, and motor available separately) from Da-Lite 20325EBI Tensioned Advantage Deluxe Electrol Screenis designed to eliminate the extra step of finishing the screen with trim. The Advantage line of projection screens is designed with ceiling trim already in place. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets make it easy to attach the screen housing to the structure above the drop ceiling.

Tensioned screens ensure the smoothest surface possible, and the screen features a closure door that hides the open space and screen in the ceiling, providing a cleaner aesthetic. The screen features simple in-ceiling installation that can be done in two stages. The screen case can be installed during the rough-in construction stage, and the fabric assembly can be completed during the finishing stage.

Da-Lite 20325EBI Tensioned Advantage Deluxe Electrol ScreenThis box is part of a system. To complete the system you will also require the fabric, roller, and motor assembly. Purchasing the box first allows the box to be installed during the "rough-in" phase of construction. The screen and other components can then be installed once construction is complete. Please be sure to select the fabric, roller, and motor assembly with the exact size and features as designated by this box. The fabric, roller, and motor that goes with this model number is: 20325EFI.

92" Diagonal / 16:9 Aspect Ratio HD Progressive 1.1 Perf Screen Surface 1.1 Gain / 170° Viewing Angle Closure Door Hides Open Space Smooth Roll Technology Box Only (No Screen Fabric) Video Projector Interface

Type
Front/Rear Projection	Front
Aspect Ratio	16:9
Style	Ceiling-recessed
Dimensions
Viewing Area	45 x 80" / 114.3 x 203.2 cm
Diagonal	92" / 233.7 cm
Surface
Gain	1.1
Viewing Angle	170°
Screen Surface	HD Progressive 1.1 Perf
Controls
Motor	Box only; no motor
Included Controls	Video projector interface
Casing
Length	102.8" / 260.1 cm
General
Voltage	220 VAC/50 Hz
Packaging Info
Package Weight	75 lb
Box Dimensions (LxWxH)	106 x 13 x 10"

Ideal for applications where projector brightness and screen size require an increase in gain, the white surface offers high-fidelity color reproduction. The perforated vinyl surface allows for the installation of speakers behind the screen. Cone: 170° Gain 1.1

Standard Low Voltage Control (LVC) to keep your screen operation flexible
Smooth Roll Technology to keep your screen perfectly flat
Slim-Tab, a lower profile and stronger tab design to keep your screen perfectly taut
Tensioning Cable System to prevent warping and ensure even lateral tension
UL Plenum rated case
White powder-coated closure doors and case for a clean aesthetic
Decora-style, three-button wall switch
Standard black backing retains projected brightness on front projection surfaces
Seamless screen surface

Related Questions and Answers

Q: 1. Does this come with the clamper to put on a tripod arm?

A: Yes, the clamp is included.

Q: 2. will this work with the JVC GY-HM600U?

A: Yes, this will work with the JVC GY-HM600U using the 2.5 mm remote port.

Q: 3. Is this controller ambidextrous?

A: As my father was a south-paw, I understand your concern. While we have not tested it, we would say that you should have no real issues using this on the left pan handle. The record button may be a bit of a stretch for your left thumb but other than that, you should be fine.

Q: 4. Will this work on the CN17x17 Cine Servo Lens?

A: It will not. This product is for the Canon CN-E 18-80mm and 70-200mm Lenses only.

Q: 5. Bought a new Canon XF-705. Will this function well with this? Any ideas for other controllers? We tried the Manfrotto arm controller and an older Canon and all were wonky and not reliable with it. Thanks!

A: The XF705 has a LANC input, this controller should work well with it.

Q: 6. how far does the arm extend?

A: Using the included aluminum shafts it can extend 2 , 4 or 6 .

Q: 7. Will this work with a Sony PXW-Z280?

A: Yes it should. The PXW-Z280 has a LANC input for a controller, which is the kind of connection this product has. They should work well together.

Q: 8. How do you keep the modeling lamp on. As soon as I take a photo, the modeling lamp goes off. I'm using the Elinchrom EL19366 Skyport Transmitter?

A: Hi,If you check your instruction book you will see how to control the modeling lamp.Here is the item you are inquiring about.Setup Visual-Flash-Control (VFC) modeProportional modelling lamp setup (PMS) Enter VFC setup :1. Press Prop push button for more than 2 seconds, until the display shows F.X (X is 0 or 1) toenter into the Modelling lamp setup menu.2. Use the Flash-Power up and down button to change setting:- F.0: Visual-Flash-Control = OFF. Modelling lamp remains ON after flash.- F.1: Visual-Flash-Control = ON. Modelling lamp switches off during recharging.3. The display switches back to normal mode after approx. 4 seconds if no button is pressed. Thesettings are automatically stored.4. Standard setting is F.0, VFC = OFFI hope this helps.Regards,Will H

Q: 9. Is this lens brand new?

A: Yes, this is a brand-new lens.

Q: 10. Does this control come with a cable long enough to mount to a pan bar?

A: The cable is 40 inches long, plenty for mounting on a tripod panbar. (Or as this former movie camera operator would say, panhandle.)

Yvenson	02/09/2024
[Front] I love this product, Easy to install and and look even better on the wall. 5

Cat5 King	01/08/2024
[16:9] This screen was installed in a small conference room with an NEC projector. The screen can be wall or ceiling mounted, and this flexibility came in handy when we had to switch to a ceiling mount at the last moment. The screen presents very well, and is unobtrusive when retracted. The tensioning system works nicely, and we didn't have to change any of the factory settings for the drop. I would have liked to see some additional mounting holes for attaching the screen to studs in the wall, so the installer has more options for wall mounting. 5

petarm	23/06/2024
[1.1] We use the electrol screens almost exclusively in close to a 100 locations. They are versatile and durable. 5

Zack	22/06/2024
[92" / 233.7 cm] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

Andreas the squint	07/05/2024
[75 lb] I used this screen in a small conference room and it was very simple to instal. 5

Rikilah	30/11/-0001
[170°] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Chip	30/11/-0001
[220 VAC/50 Hz] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100'). 5