The white Da-Lite 20326I 52x92 Tensioned Advantage Deluxe Screenfrom Da-Lite 20326I 52x92 Tensioned Advantage Deluxe Screenis designed to be concealed neatly in a ceiling when not in use, which makes it ideal for corporate conference rooms. The screen can be installed in two stages; the screen case can be installed during construction, and the screen assembly can be attached during the finishing stage. Once the screen is installed, the screen's trim conceals the rough opening in the ceiling, eliminating the need to complete additional trim work. Sliding installation brackets allow you to attach the screen housing to the structure above the drop ceiling. Closure doors keep the screen out of sight when it isn't being used.

The HD Progressive 1.1 Perf surface has a 1.1 gain, 170° viewing angle, and is ideal for applications where projector brightness and screen size require an increase in gain. The white surface offers true color reproduction and fidelity. The perforated vinyl surface allows for the installation of speakers behind the surface. HD Progressive 1.1 Perf can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified. Each side of the material uses a tab guide cable system to maintain even lateral tension and hold the surface flat. This helps to ensure that pixels from the display image don't overlap with one another. Tensioning also helps to prevent creases or folding of your screen. A custom slat bar with added weight maintains vertical tension on the screen surface.

For controlling the screen, a three-position Decora-style wall plate is included, along with a cover switch. Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you are using an IR or RF remote to control your screen. The video projector interface provides DC controls that allow you to control the screen by simply turning your projector on or off. The screen will descend when the projector is turned on, and retract back into the case when the projector is turned off. Your projector must have a 12V or 5V lead to operate the interface (cable not included).

106" Diagonal    16:9 Aspect Ratio    HD Progressive 1.1 Perf Surface    1.1 Gain, 170° Viewing Angle    Black Backing on Surface    Tensioned for Flat Image Display    110-120 VAC, 60 Hz Motor    Three-Button Decora-Style Wall Switch    Includes Control Through Projector

The screen has two motors, both mounted inside the case. One motor operates the door at the bottom of the case, and the other controls the viewing surface.

The electrical junction box is internally integrated into the housing, making it possible to install the housing, and then wire to the building's electrical system during construction.

Smooth Roll Technology to keep your screen flat.

Slim-Tab, a lower profile, and strong tab design to keep your screen taut.

White powder-coated case with white endcaps and closure doors for a clean aesthetic.

The case is UL Plenum rated.

Related Questions and Answers

Q: 1. Does this control come with a cable long enough to mount to a pan bar?

A: The cable is 40 inches long, plenty for mounting on a tripod panbar. (Or as this former movie camera operator would say, panhandle.)

Q: 2. will this work with the JVC GY-HM600U?

A: Yes, this will work with the JVC GY-HM600U using the 2.5 mm remote port.

Q: 3. can extensions be added to this arm for example if we need to to be 18 inches instead of 9 ? I am looking for a wall mount that can be swung out of the way for a small camera so when we use the camera we will swing it out when we are not using the camera it can be stored against the wall

A: Yes, I have ordered many of these units and mixed and matched the poles to make several mounts of varying sizes. Each pole extension uses the same 1/4 -20 screw size, so even the camera could mount directly to the pole rather than the ball mount.

Q: 4. If I bought 2 of these could one control zoom and the other focus?

A: We're afraid not, this model is designed for Zoom Control and will not control focus. So that we may best assist you finding the proper product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 5. Can this zoom control also work with a Fujinon 19-90 lens?

A: The VariZoom VZPGC20 20-Pin Zoom Control for Canon CN-E 18-80mm & 70-200mm Lenses is designed for Canon lenses. The recommended zoom control for the Fujinon ZK19-90mm T2.9 Cabrio Lens (PL Mount) would be Fujinon Digital Zoom Demand Controller for ENG/EFP Lenses, BH #FUERD10AD01M.

Q: 6. Will the Westcott 7' Parabolic Umbrella and/or the Impact 7' Parobolic Umbrella fit on these flash heads?

A: The RX4 has 2 places to secure umbrellas. In the center for 7mm post and on the side for 8mm and larger.

Q: 7. Is this controller ambidextrous?

A: As my father was a south-paw, I understand your concern. While we have not tested it, we would say that you should have no real issues using this on the left pan handle. The record button may be a bit of a stretch for your left thumb but other than that, you should be fine.

Q: 8. Is this lens brand new?

A: Yes, this is a brand-new lens.

Q: 9. Will this work with a Panasonic HC-X1000?

A: This controller is for Sony and Canon LANC compatible cameras. It will not work with the HC-X1000, however we do have some Panasonic compatible controllers that will work. B&H # VAVZPROPZFI is the Panasonic version of this controller and is a good fit for the HC-X1000.

Q: 10. Does this include the 8pin cable with the controller?

A: This controller comes with a 40 inch 8-pin cable.