Canare Male To Right Angle Male Hd-Sdi Cable 125' Red

Canare Male To Right Angle Male Hd-sdi Cable 125' Red

Product Code: eq175312
Availability: In Stock

$505.50 $738.03

Qty

6 reviews Write a review

Description
Reviews (6)

The red Canare Male to Right Angle Male HD-SDI Cable 125' Redis a 125' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable BNC Male to Right Angle Male Connectors Solid Copper Center Conductor Foam PE Dielectric Insulation Dual Copper Braid 100% Sweep Tested

General
Connector 1	1x BNC
Connector 2	1x BNC
Coaxial Type	RG-6
Cable Length	125' / 38 m
Interface	12G-SDI
SMPTE Standards	SMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge	18 AWG
Weight	8 lb / 3.6 kg
Packaging Info
Package Weight	7.45 lb
Box Dimensions (LxWxH)	11.1 x 10.6 x 3.2"

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Is it regulated?

A: no this dummy battery is not regulated

Q: 2. When shooting portrait mode with a Fuji battery grip and Kirk L bracket, I don't see this working with an XT-2, with or without the block,Is this correct?

A: I use an L bracket on a different camera (Nikon D810, However, the L bracket I use (RRS) has two positions, one of which pulls the short arm of the L away from the camera, permitting sufficient room for the right angle bracket to be attached & leading the cable towards the back of the camera. The straight connect which is supplied with the camera, does not work b/c the cable goes out the short arm of the L, preventing its attachment to the tripod head.

Q: 3. Can I use this to connect an Atomos AtomX Sony L-Series Type Battery Eliminator on an Atomos Ninja V to a V mount setup?

A: No, barrel will not fit its a 5.5/2.5 mm dc cable.

Q: 4. Can this be used with the Blind Spot Power Junkie?

A: Not that we are aware of. This connection is for Tilta products. For the Blind Spot Power Junkie we can suggest BH #BLBSG1302901 instead, which is the Canon LP-E6 dummy battery option. This will work to power the Pocket Cinema Camera 4K from the Blind Spot Power Junkie. https://bhpho.to/39hdCyS

Q: 5. When Connected to a 1DX II does the angle turn up or down, I intend to connect to a CamRanger attached to Hot Shoe?

A: That cable would turn down. If that won't work for you, you could try the straight cable: a href= https://www.bhphotovideo.com/c/product/1156080-REG/tether_tools_cu5404org_tetherpro_usb_3_0_male.html target= _blank https://www.bhphotovideo.com/c/product/1156080-REG/tether_tools_cu5404org_tetherpro_usb_3_0_male.html/a

Q: 6. Would this cable work with connecting an UltraSync One to a bmpcc 6k? Then, to confirm, I would need another UltraSync One connected to a Zoom F8n, which would utilize the BNC to Atomos LTC? Thanks in advance.

A: Yes, the Atomos LTC to Right-Angle 3.5mm Mic-Level Timecode Cable will work to connect an UltraSync One to a BMPCC to send timecode, then you can use a cable like the Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (B&H # ATOMXCAB01) for the Zoom F8n. Once the UltraSync One is synced with the device, timecode is embedded in the recorded files and can be recognized by industry-standard software and NLEs (non-linear editors).

Q: 7. Will this work with the Dji RS2?

A: The DJI RS2 does not have a 2-pin LEMO port, nor a DC port.

Q: 8. will this work with Nikon D500?

A: Yes, the TetherPro USB 3.0 to Micro-B cable, is the correct cable for a Nikon D500.

Q: 9. Can this plate be used with a tripod?

A: The TetherBlock has 1/4" - 20 threaded mounting holes on the bottom so you can attach a tripod plate. The TetherBlock Arca has the Arca Swiss style tripod mount as well as 1/4" mounting threads on the bottom.

Q: 10. Is it compatible with the BMPCC 6K?

A: Yes it should be. The Pocket Cinema Camera 4K and 6K share the same power connections.

Derek	17/09/2024
[1x BNC] Among the best quality BNC cables on the market. 5

Robert	01/09/2024
[RG-6] They are stiff compared to other cables, but I have a bunch of these and they have, to date, NEVER let me down. 5

Stephen	23/08/2024
[1x BNC] I use this to feed signal to my Inferno, it is a good, sturdy build and works great. 5

Chris	29/07/2024
[7.45 lb] Love canare cables. Been using their connectors since the 80's. high quality. Have 2 200 ft multi channel UHD SDI snakes. 90 ends work great on rack. 5

Arnold	25/06/2024
[RG-6] This cable is a little pricey, but I find you get what you pay for with cables. I have a PTZ camera that needed to be tucked tightly in a corner for a project and this cable worked perfect by giving me that extra inch or so I needed push back in the corner as much as possible. Almost all my cables are Canare brand and I've always found them to be highly reliable. 5

Robert	18/04/2024
[18 AWG] Bulky, not very flexible, but it is built like a tank and has a right angle on one end. All this 12G cable talk made me worried and I use this on everything except gimbal work. 5