Canare Male To Right Angle Male Hd-Sdi Video Cable 200' Red

Canare Male To Right Angle Male Hd-sdi Video Cable 200' Red

Product Code: eq175313
Availability: In Stock

$749.85 $1,184.76

Qty

19 reviews Write a review

Description
Reviews (19)

The red Canare Male to Right Angle Male HD-SDI Video Cable 200' Redis a 200' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable BNC Male to Right Angle Male Connectors Solid Copper Center Conductor Foam PE Dielectric Insulation Dual Copper Braid 100% Sweep Tested

General
Connector 1	1x BNC
Connector 2	1x BNC
Coaxial Type	RG-6
Cable Length	200' / 61 m
Interface	12G-SDI
SMPTE Standards	SMPTE 259M/292M/425M/ST 2081/2082-1
Wire Gauge	18 AWG
Weight	12.8 lb / 5.8 kg
Packaging Info
Package Weight	12.05 lb
Box Dimensions (LxWxH)	8.7 x 6.6 x 2.7"

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. What cable do I need to connect my Nikon D4s to my mac book?

A: Not the USB3.0 cable pictured here. You need the USB2.0 version.

Q: 2. Is this cable compatible with Fujifilm X-T2?

A: Yes. https://fujifilm-x.com/global/support/compatibility/cameras/x-t2/

Q: 3. is it works with Nikon D800E?

A: Yes it works just fine.

Q: 4. Is it compatible with the BMPCC 6K?

A: Yes it should be. The Pocket Cinema Camera 4K and 6K share the same power connections.

Q: 5. Will this cord connect Canon 5D Mark II & Mark IV to MAC laptop?

A: If your Mac laptop has a USB-C port, then you would be able to use this cable to connect you Canon cameras and transfer data.

Q: 6. Can this cable connect a BMPCC 6k to a Rhino Arc II?

A: This cable is intended for power and is not a control cable.

Q: 7. Can I connect it to a power bank with a 12V 2.5mm barrel output?

A: This cable is designed specifically to work Tilta Battery plates that have the needed 2.5mm barrel output such as BH #TIBT003A. We are not aware of how well it might work with non-Tilta products. https://bhpho.to/2Qpm75i

Q: 8. Can this be used to power the blackmagic PCC4K using the DC power out on a Zhiyun Crane 2?

A: Not that we are aware of. This product is meant to be used with Tilta battery plates and battery baseplates only.

Q: 9. Would this cable work with connecting an UltraSync One to a bmpcc 6k? Then, to confirm, I would need another UltraSync One connected to a Zoom F8n, which would utilize the BNC to Atomos LTC? Thanks in advance.

A: Yes, the Atomos LTC to Right-Angle 3.5mm Mic-Level Timecode Cable will work to connect an UltraSync One to a BMPCC to send timecode, then you can use a cable like the Atomos DIN to BNC Timecode and Genlock Cable for UltraSync ONE (B&H # ATOMXCAB01) for the Zoom F8n. Once the UltraSync One is synced with the device, timecode is embedded in the recorded files and can be recognized by industry-standard software and NLEs (non-linear editors).

Q: 10. Can I use this to connect an Atomos AtomX Sony L-Series Type Battery Eliminator on an Atomos Ninja V to a V mount setup?

A: No, barrel will not fit its a 5.5/2.5 mm dc cable.

Derek	13/09/2024
[1x BNC] We use these short cables on our Steadicam rigs and they do precisely the job we need them to do. Thank you Canare. 5

James	22/08/2024
[1x BNC] The flexibility of this cable helps greatly when setting up for a show. 5

Arnold	13/08/2024
[18 AWG] This cable is a little pricey, but I find you get what you pay for with cables. I have a PTZ camera that needed to be tucked tightly in a corner for a project and this cable worked perfect by giving me that extra inch or so I needed push back in the corner as much as possible. Almost all my cables are Canare brand and I've always found them to be highly reliable. 5

Vegavision	11/08/2024
[RG-6] Construccin robusta y de el largo perfecto, producto muy confiable de la mejor calidad. Lo uso para el grabador Odyssey 7Q con la Sony FS700R. 5

Chris	04/08/2024
[18 AWG] Classic great lens. Paired with speed booster it becomes a 2.8. Solid lens for every bag 5

Nathan	06/07/2024
[12.05 lb] Works great with 4K workflow. Cables are very flexible and appear to be rugged as well. 5

Robert	19/06/2024
[1x BNC] They are stiff compared to other cables, but I have a bunch of these and they have, to date, NEVER let me down. 5

Jonathan	19/06/2024
[RG-6] This cable works perfect with the red komodo. The right angle keeps the cable tucked behind the batteries making it easier for hand held shooting. 5

Robert	04/06/2024
[18 AWG] Bulky, not very flexible, but it is built like a tank and has a right angle on one end. All this 12G cable talk made me worried and I use this on everything except gimbal work. 5

Gary	25/05/2024
[1x BNC] This is absolutely the best cable ever that has both a straight and a 90 degree connector. How did we ever live without this? I pity the poor people who have only two straight connectors. Their lives must just be so miserable not having a 90 degree connector available to them. Seriously, it's a cable, seems well built, it works fine and it comes in a variety of colors which is good for organization/tracing if you need to do that. The 90 degree is handy in some cases for cable management or less stress on a connector. At the end of the day it's a cable that works. What more do you want... 5