Da-Lite 20328B Tensioned Advantage Deluxe Electrol Case 58X104" Hd

Da-lite 20328b Tensioned Advantage Deluxe Electrol Case 58x104" Hd

Product Code: eq175318
Availability: In Stock

$2,400.00 $3,072.00

Qty

12 reviews Write a review

Description
Reviews (12)

The 20328B Tensioned Advantage Deluxe Electrol Case, Wall Switch, and 120VAC Internal Wiring for 58 x 104" HD Progressive 1.1 Perforated Fabric by Da-Lite is meant to be used along with its separately sold Tensioned Advantage Deluxe fabric, roller, and motor assembly. This item only provides the ceiling case, Decora-style wall switch, and internal wiring for a 120VAC motor. The HD Progressive 1.1 Perforated material, fabric roller, and motor must be purchased separately.

Correct Fabric, Roller, and Motor are Required - See Description

Type
Style	Ceiling-Recessed
Controls
Included Controls	Wall switch
Casing
Finish	Aluminum
Length	128.2" / 325.6 cm
General
Voltage	120 VAC/60 Hz
Packaging Info
Package Weight	121 lb
Box Dimensions (LxWxH)	138 x 13 x 10"

Related Questions and Answers

Q: 1. Other than an additional 2 outputs, how is this different than BH #FRMSX2L? I want to be sure the internals and technology used is exactly the same as I wish to use this device not only to split a signal, but to add additional safeguards and protection to the SDI port on the RED Komodo in the event of a power surge. Thanks.

A: Both Freakshow HD Micro Split DA models are the same other than the additional outputs. Please still follow the RED SDI safety guidelines. * Preventing Damage to SDI Outputs https://bit.ly/3i0sQi9

Q: 2. does this case fit canon sx600?

A: The camera fits my sx610. I am not sure the dimensions of my camera vs the sx600. I would expect them to be the same. I would look up the dimensions of the two cameras and I bet they would be the same. Good luck.

Q: 3. Is this suitable for a Sky-Watcher EQ35 tripod?

A: No bu you can use this Lightware instead: https://bhpho.to/36ATfNK

Q: 4. How many channels of embedded audio does this pass through? Also, what's the latency of the SDI signal if used to split a viewfinder output?

A: The Freakshow HD Micro Split 4K/12G Reclocking DA with Standard Connector will embed audio on all channels. You should experience little to no latency.

Q: 5. Can large filter holders be thread attached to the front of this lens?

A: As long as the brand/model filter holder you own or are planning to purchase has 82mm adapter rings designed for use with the filter holder, then yes, you may attach a filter holder (with the 82mm adapter ring) to the filter threads on the front of the Pentax HD Pentax DA* 11-18mm f/2.8 ED DC AW Lens.

Q: 6. Anyone using a 42" bag with 42" Impact light stands? Just curious if a folded 42" stand will fit within 42" bag. Thanks

A: Yes, the Ruggard Deluxe Padded 42" Tripod Case (Black) will accommodate the Impact light stands that are foldable to 42".

Q: 7. How will this lens behave on a FF body like the K1?

A: The Pentax HD Pentax DA* 11-18mm f/2.8 ED DC AW Lens is designed for cropped sensor cameras only. The Pentax K-1 does have a cropped sensor mode so you could use this lens. You will only be using a small section of the sensor and will get a small file size.

Q: 8. Can this bag accommodate Matthews Hollywood Baby Junior Double Riser Stand, is it wide enough?

A: The Ruggard Deluxe Padded 48" Tripod Case is slightly too small to accommodate the Matthews Hollywood Baby Junior Double Riser stand.

Q: 9. Will it fit Gitzo tripod?

A: The 35 inch tripod bag fits my Manfrotto 535 tripod with room to spare. With the Manfrotto N8 head on it is a tight fit. If the Gitzo is under 35 inches closed it will fit as the nag is spacious in girtth.

Q: 10. will the Gizo Systematic Series 3 CF with Arca Series 4 Center Ball head tripod , B&H #GIGK3533LS83 fit in the 32" Case?

A: The Gitzo Systematic Series 3 Carbon Fiber Tripod with Arca-Type Series 4 Center Ball Head with Lever Release fits in the Ruggard Deluxe Padded 35" Tripod Case (Black).

Rikilah	22/09/2024
[121 lb] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy. 5

Yvenson	08/09/2024
[Wall switch] I love this product, Easy to install and and look even better on the wall. 5

Kim W.	16/08/2024
[120 VAC/60 Hz] I purchased this screen for our local camera club. It replaced a silver lenticular tripod standing screen that was heavy, had permanent rippling in the fabric, and didn't project the true quality of our digital images. After the old clunky screen almost fell on me while I conducted the meeting, I thought to myslef-Enough! Months later the vote was unanimous; we looked into this screen and it was our choice.THIS SCREEN is light weight, sets up instantly-fast-efficiently-I just can't say enough good things about the set up. Our digital images have never looked so good projected. The B&H # DACDIT100 bag for this screen makes it easier to carry while protecting the black surface of the aluminum case from scratches, and the screen fits perfectly in the bag. Projector used: Epson Powerlite Home Cinema 1040 WUXGA. 5

Zack	06/08/2024
[121 lb] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions. 5

DOCANDYP	27/07/2024
[138 x 13 x 10"] Storage and shipping of portable screen. Easy to use and protects very well. Shoulder strap very useful. 5

Andreas the squint	22/07/2024
[Aluminum] I used this screen in a small conference room and it was very simple to instal. 5

WW Leader	21/07/2024
[121 lb] I added the case to my order at the last minute. I transport my 100 screen to and from meetings on a regular basis. I can't imagine transporting the screen without this case. I'd recommend the case to anyone considering the purchase of an Insta-Theater screen. 5

Ward	13/07/2024
[138 x 13 x 10"] Good quality, keeps our screens clean and easier to move and store. 5

Mark R.	27/06/2024
[Wall switch] great - for a case, not a very hard job. still done well. 5

Bible Prophecy Lecturer	04/06/2024
[138 x 13 x 10"] I thought the Da-Lite Insta-Theater was just fine in its self-contained casing. My wife talked me into purchasing this carrying case for it. Wow! This carrying case made it so much easier to carry the screen around. It also keeps the screen casing from getting scratched. I highly recommend purchasing this carrying case to protect the investment put into purchasing the Insta-Theater. 5