The 10' (3 m) Camplex TAC1 Simplex OM3 Tactical Fiber Cable 10'from Camplex TAC1 Simplex OM3 Tactical Fiber Cable 10'meets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The polyurethane core-locked design will be found where ordinary PVC jacket cables do not provide adequate protection in the field. The cable is machine polished and interferometer tested to industry standards.

Designed to Withstand Impact    Indoor/Outdoor Rated Jacket    Polyurethane Core-Locked Design    Rugged & Lightweight    Broadcast Deployable

Broadcast deployable

Indoor/Outdoor rated jacket

500 Micron primary acrylate buffer with 900 Micron secondary hard elastomeric buffer (Ultra-Fox Plus)

Crush and impact resistance due to their polyurethane core-locked outer jacket

Designed to withstand crush and impact after deployment

Strong, lightweight and durable

Related Questions and Answers

Q: 1. Can this be used with a full size DSLR with Nikon 300mm f4 AF-S (non VR version) lens collar attached to gimbal? Would it still tilt upwards fully when balanced or would camera be too low and hit lower edge of gimbal?

A: Yes, it can handle a DSLR and large lens, and will angle up to about 45 degrees.

Q: 2. Will the PH10 Gimbal head work with a long prime lens (eg: 600mm f4)? I am not asking if it will support the weight. I want to know if the lens can be properly balanced on the gimbal head without the side of the lens rubbing on the side of the gimbal arm. Also, is the gimbal head sealed properly, in case it is used in sand and near salt water?

A: The Gimbal will work with lenses up to 33lbs. If you need to balance a longer lens than the included plate allows for you could consider getting the Oben QR-53 Long Lens Quick Release Plate (5.3") BH #OBQR53 • MFR #QR-53.

Q: 3. Will this head support a large prime lens such as a Canon 500mm f4 with a mirrorless camera?

A: Yes. The Sirui PH-10 Carbon Fiber Gimbal Head has a maximum load capacity of 33 lbs (14.97 kg). The Canon EF 500mm f/4L IS II USM Lens weighs 7.02 lbs. At the time of this reply, the heaviest Canon mirrorless digital camera would be the Canon EOS R Mirrorless Digital Camera, which would be 1.46 lbs (0.66 kg), and the weight of the Canon Mount Adapter EF-EOS R would be 0.24 lbs (0.11 kg). Combined, the total weight of the Canon EOS R Mirrorless Digital Camera, the Canon EF 500mm f/4L IS II USM Lens, and the Canon Mount Adapter EF-EOS R would be 8.71 lbs (3.95 kg).

Q: 4. Will this work with an R5 and Tamron 150-600 lens on a SLIK Tripod Pro 724 CBH?

A: Yes, the Sirui PH-10 Carbon Fiber GImbal Head can fit on a Slik Pro 724 CBH with a Canon EOS R5 and an adapted Tamron 150-600mm lens.

Q: 5. Did they fix the PH20's awful drag adjustment in pan axis, or does the PH10 have the same ratcheting effect at very slight drag?

A: As far as I am aware, both the PH10 and PH20 have the same pan lock mechanism. Neither are known to have adjustable pan drag; it is simply a pan locking knob with no adjustment to tension.

Q: 6. will this work with om system om1m2 with battery grip and a 150-400 f4.5 tc 1.25 pro lens?

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head will work with the OM-1 II with a battery grip and the 150-400mm lens attached.

Q: 7. Do you need to use this cutter on a table top, or can you mount it on plywood for a wall mount?

A: This Logan 750-1 Simplex Elite Mat Cutter works best on a table top.

Q: 8. Does this work with Nikon D850 and Nikon 200-500 vr lens

A: Yes this head is compatible with the Nikon D850 that has a Nikon 200-500mm lens attached.

Q: 9. Is it possible to reverse the mount to shorten the height between the base mount and the camera?

A: The Sirui PH-10 Carbon Fiber Gimbal Head is not designed for the elements to be rearranged in any way.

Q: 10. Does the PH10 have the same horrible drag adjustment in pan as the PH20, or did they fix it and get rid of the ratcheting at very slight drag?

A: As far as I am aware, both the PH10 and PH20 have the same pan lock mechanism. Neither are known to have adjustable pan drag; it is simply a pan locking knob with no adjustment to tension.