Camplex Tac1 Simplex Om3 Tactical Fiber Optic Cable 100'

Product Code: eq175366
Availability: In Stock

$511.47 $659.80

Qty

13 reviews Write a review

Description
Reviews (13)

The 100' (30.5 m) Camplex TAC1 Simplex OM3 Tactical Fiber Optic Cable 100'from Camplex TAC1 Simplex OM3 Tactical Fiber Optic Cable 100'meets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The polyurethane core-locked design will be found where ordinary PVC jacket cables do not provide adequate protection in the field. The cable is machine polished and interferometer tested to industry standards.

Designed to Withstand Impact Indoor/Outdoor Rated Jacket Polyurethane Core-Locked Design Rugged & Lightweight Broadcast Deployable

Parameters
Connector 1	ST
Connector 2	ST
Cable Length	100' / 30.5 m
Fiber Type	OM3 Multimode
Core Size	50 µm
Return Loss	RL: < 55 dB IL: < 0.25 dB
Attenuation	1.5 dB/km @ 1310 nm 3.5 dB/km @ 850 nm
Operating Conditions	-67 to 185°F / -55 to 85°C

Broadcast deployable

Indoor/Outdoor rated jacket

500 Micron primary acrylate buffer with 900 Micron secondary hard elastomeric buffer (Ultra-Fox Plus)

Crush and impact resistance due to their polyurethane core-locked outer jacket

Designed to withstand crush and impact after deployment

Strong, lightweight and durable

Related Questions and Answers

Q: 1. Does this work with mamiya rb67

A: Yes, the Vello TSR-40 Threaded Shutter Release Cable (15.75") will work with the Mamiya RB67.

Q: 2. Will this work with a hasselblad 500c (not 500cm)?

A: Yes the Vello TSR-100 Threaded Shutter Release Cable (39.4") is compatible with a Hasselblad 500c.

Q: 3. Will this cable work with the canon AE-1?

A: Yes, it is compatible with the AE-1.

Q: 4. does this cut 8 ply mats and foam core?

A: Logan Graphics 750-1 Simplex Elite Mat Cutter (40" Cut Length) BH #LO7501 comes with the 701-1 Straight Cutter that cuts up to 3/8" foam board and the #5000 8 Ply Bevel Cutter that cuts 8 ply mat board.

Q: 5. Do you need to use this cutter on a table top, or can you mount it on plywood for a wall mount?

A: This Logan 750-1 Simplex Elite Mat Cutter works best on a table top.

Q: 6. Does it work with rolleiflex 2.8f?

A: Yes, the Vello TSR-40 Threaded Shutter Release Cable (15.75") would be compatible for use with the threaded sockect on the shutter release button on the Rollei Rolleiflex 2.8F 35mm TLR Film Camera.

Q: 7. Does this work with Pentax lx?

A: Yes, the Vello TSR-40 Threaded Shutter Release Cable (15.75") is compatible with the Pentax LX camera.

Q: 8. I want to cut reverse bevels. Can I do that with the Logan 750?

A: Sorry, I haven't tried that yet.

Q: 9. Does this shutter release work with the Hasselblad 501cm?

A: Yes it does

Q: 10. Will it work with the Olympus OM-1?

A: Yes this release works on an Olympus OM-1.

John	01/09/2024
[ST] While I wasn't a fan of the cost at first, this is certainly a product where we are getting what we paid for. Cars and trucks of all sizes run over these cables all the time while we are trying to set things up, and after a year, the cables still look new- no signs of damage or even wear. They have sat outside for over a month at a time, in the rain and snow (minus the ends), and they just work great. 5

Aaron	28/08/2024
[OM3 Multimode] Cable worked as expected. We use it for our field camera on football game days. We can move all over the field without a signal drop. 5

Jon	21/08/2024
[ST] Works as expected 5

Malenky	08/08/2024
[ST] I have a reel with just one channel on it, but found out it's cheaper to buy this cable and just remove the bracket from the LC side. Comes right out without cutting anything. 5

James	28/07/2024
[50 µm] Perfect solution instead of re-ending long fiber runs. Product is well made and works great. Make sure you match the fiber mode. 5