Shape Paparazzi Handle Canon C100 C300 C500

Product Code: eq175382
Availability: In Stock

$829.23 $1,003.37

Qty

10 reviews Write a review

Description
Reviews (10)

Mount your Canon EOS C500, C300, or C100 camera on a shoulder rig, tripod, or other rig and add accessories with this SHAPE Paparazzi Handle Canon C100 C300 C500from SHAPE. The system features a baseplate with 15mm LWS rod clamps, a camera plate, and two aluminum 15mm rods that measure 12" in length.

The baseplate features M4, 3/8"-16, and 1/4"-20 screws to securely mount your camera. The baseplate also features 1/4"-20 and 3/8"-16 tripod mounting threads on the bottom. The standard 15mm LWS rod ports secure the included 15mm rods with locking levers, allowing you to add accessories such as a follow focus, matte box, and more.

Specifically for Canon C100/C300/C500 Baseplate with 15mm Rods Spring-Loaded Locking Levers Several 1/4"-20 & 3/8"-16 Threaded Holes

Mounting
Rod Standard	15 mm LWS / 60 mm Spacing
Included Rods	2x 12" / 30.48 cm 15 mm Aluminum Rod
Battery Plate Type	No
Accessory Mounting	No
Camera Mounting	1/4"-20 Male Screw, 3/8"-16 Male Screw, Hex 4 Male Screw
Tripod Mounting	1/4"-20 Female Thread, 3/8"-16 Female Thread
Rod Ports	Baseplate 2x 15 mm Rod Port
Shoe Mounting	No
Rosettes	No
General
Support Type	Baseplate, Rod Support System
Grip Type	No
Camera Compatibility	Canon EOS C100, Canon EOS C300 / C500
Materials	Aluminum
Dimensions	4 x 4 x 1.31" / 10.16 x 10.16 x 3.33 cm
Weight	12.77 oz / 362 g
Packaging Info
Package Weight	1.32 lb
Box Dimensions (LxWxH)	13.9 x 4.4 x 2.3"

Attaches underneath the camera via M4, 3/8"-16, and 1/4"-20 screws

Mount on a tripod or rig with 3/8"-16 and 1/4"-20 threads

The 15mm rod clamps on the baseplate secure two 12" long 15mm aluminum rods

The 15mm LWS design is designed to respect the camera's optical center

Four rubber pads at the top of the baseplate protect and secure your camera

Related Questions and Answers

Q: 1. Would this work with a Sony fs7 m2?

A: Hello Tania,Thank you for contacting us! Unfortunately, this camera support was specifically designed for the C300 Mark i. We cannot guarantee it will fit for the Sony FS7M2.We do have a line of products for the Sony camera that will give you several interesting solutions. We invite you to visit our Sony FS7Mii page on our website.a href= https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx target= _blank https://www.shapewlb.com/en/sony-pxw-fs7m2-camera-supports.aspx/aWe hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 2. I have a similar Shape handle on an FS5 but am possibly upgrading to a c500. can I purchase and swap out just the hardware on my existing handle attachment end to accommodate the c500? handle?

A: This product is compatible with the Canon EOS 500 Mark II, we are not aware of how it would work with an FS5.

Q: 3. Will this extender work c300ii

A: No, the SHAPE Relocator Extension Cable for Canon C500 Mark II and C300 Mark III is not listed for use with the Canon Cinema EOS C300 Mark II Camcorder Body with Dual Pixel CMOS AF (EF Lens Mount). Consider the SHAPE Grip Relocator Extension Cable for Canon EOS C Series Camera BH #SHC300RE instead. See the link below: https://bhpho.to/3zjUdvU

Q: 4. Will this also fit the C300 Mark iii?

A: Hello Derick, Thank you for your question! Indeed, our SHAPE Cage and Handle with EVF Mount for Canon C500 Mark II is fully compatible with the C300 mark iii as both cameras have the same physical body. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 5. Can you make this a non-offset shoulder rig if you wanted, with just one set of rods? The reason I ask is if I could use the offset for my c100 (rear monitor) or one set of rods on my shoulder for c300 (different monitor).

A: Hi Bobby, Thanks to use SHAPE products on your camera system. If you already have an OFFSET shoulder rig for the C-100 you can just buy a pair of 18 inches rods and you'll able to transform your rig into one set to use with C-300 camera. To do so, you have to take off the OFFSET bracket and to add the rods so that you'll have the new configuration ready to use with your Canon C-300. But if you're looking for a straight rig (in line configuration) SHAPE already have one that you can buy.

Q: 6. Hello! Will this work on a Canon C500 MK2? Thanks

A: No it will not. If you are interested in getting a V Mount for the C500 mk2 you should consider these options: Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (V-Mount) B&H # WO282300 MFR # 282300 SHAPE D-Box Camera Power & Charger for Canon C500 Mark II & C300 Mark III (V-Mount) B&H # SHBXC52 MFR # BXC52 Tilta Battery Plate for Canon C500 Mark II & C300 Mark III (V-Mount) B&H # TIEST19BTPV MFR # ES-T19-BTP-V

Q: 7. Does this baseplate work with a mattebox without needing a riser to put it at the correct height for the C300?

A: This plate allows the rods to sit at just the right height for the Arri MMB-1 Mattebox.

Q: 8. Hello! Will this work on a Canon C500 MK2?

Q: 9. Will this work with the C300 Mark III?

A: Hello Curren, Thank you for your question! Indeed our remote extension handle for the C500 Mkii is also compatible with the C300 mkiii. Our unit is shipped with the appropriate cable to make this work. We hope this help and we thank you for your interest in our products. The SHAPE team.

Q: 10. Is this compatible for the c300 mark ii?

A: No it is not.

anyonymous	22/09/2024
[1.32 lb] Albeit fairly expensive, the mount is comfortable and light. Changing around the rig is simple and easy. I use this with my C100 and have immensely enjoyed the easy of setup and breakdown as well as the comfort while shooting. I have needed a counter weight, which is not included. Overall, I highly recommend. 5

Daniel	02/08/2024
[1.32 lb] Works great paired with my C100mii. Light and sturdy 5

anyonymous	03/07/2024
[1.32 lb] Outstanding.......Best offset rig out there.Superior building quality. A must have for the owner of Cinema Eos camera. Almost forget......Buy the optional counterweight if you hare planning to buy this rig........Thanks Shape you rock! 5

James	28/06/2024
[Aluminum] Splendid fit and finish and very solid construction. Multiple adjustment points makes it easy to configure to fit your body type and shooting style. Comfortable to use and surprisingly lightweight. Wish I'd bought this years ago...reminds me why I love handheld shooting... 5

Mark	19/06/2024
[Aluminum] I wasn't sure how the build quality would be like but it is very good. Solid. Precision made. Does the job exactly as it should. 5

anyonymous	15/06/2024
[1.32 lb] Albeit fairly expensive, the mount is comfortable and light. Changing around the rig is simple and easy. I use this with my C100 and have immensely enjoyed the easy of setup and breakdown as well as the comfort while shooting. I have needed a counter weight, which is not included. Overall, I highly recommend. #sweepstakes 5

JohnC	12/05/2024
[1.32 lb] My c100 shoulder rig had a cheap camera mount that allowed my camera to spin slightly which I hate, so I got this Shape rail block/mount, and its very nice and solid, no spin anymore. I also have the shape handles and shoulder pad. I love the Shape stuff, they make very high quality gear thats not over priced. 5

Claudio	17/04/2024
[Aluminum] someone recomended this shoulder mount to me thats why i got it. i must admit is a little expensive but its worth every penny. the built quality is incredible. 5

Mike	16/04/2024
[Aluminum] This rig was MADE for the EOS Cinema Series cameras and it does a darn fine good job at that. Love the handles and the ease of re-positioning. Mounting the camera itself requires a screwdriver, but other then that, all the rail accessories glide nicely and secure very well with advanced engineering and tooling methods used in the construction of this fine beautiful piece of art. Got a Cinema camera and don't want to only have the viewfinder as an option, you found your rig. 5

Adam	09/04/2024
[1.32 lb] The product does exactly what it says it will. It is a quality construction and works well. Sometimes the tightening knob hits the bottom of the camera body, but this is a minor minor inconvenience. 5