The 10' (3 m) Camplex TAC1 Simplex LC Fiber Optic Tactical Cable 10'from Camplex TAC1 Simplex LC Fiber Optic Tactical Cable 10'meets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The polyurethane core-locked design will be found where ordinary PVC jacket cables do not provide adequate protection in the field. The cable is machine polished and interferometer tested to industry standards.

Designed to Withstand Impact    Indoor/Outdoor Rated Jacket    Polyurethane Core-Locked Design    Rugged & Lightweight    Broadcast Deployable

Broadcast deployable

Indoor/Outdoor rated jacket

500 Micron primary acrylate buffer with 900 Micron secondary hard elastomeric buffer (Ultra-Fox Plus)

Crush and impact resistance due to their polyurethane core-locked outer jacket

Designed to withstand crush and impact after deployment

Strong, lightweight, and durable

Temporarily deployed cables that can be retrieved for repeated use

Related Questions and Answers

Q: 1. Can you use the tripod without the center column?

A: Unfortunately not. You need a center column. It does however include a short center column. You can swap out the center column for the shorter one. This allows for shooting low to the ground and reduces carrying weight as well.

Q: 2. What is the length of the supplied quick release plate?

A: The plate is around 5 inches long.

Q: 3. Would this gimbal work with a 300-800mm sigma lens?

A: The Sirui PH-10 Carbon Fiber Gimbal Head has a stated load capacity of 33 lbs, which is a bit light for nearly 15-lb lens. A capacity over 40 lbs would be better.

Q: 4. Does this work with Nikon D850 and Nikon 200-500 vr lens

A: Yes this head is compatible with the Nikon D850 that has a Nikon 200-500mm lens attached.

Q: 5. Does this come with a travel bag? And is there any accessory for holding a cellphone?

A: The T-1205 Carbon Fiber Travel Tripod with E-10 Ball Head does not come with a travel bag. We recommend using the Oben ASPTA-20 Smartphone Tripod Adapter to hold a cellphone. BH# OBASPTA20

Q: 6. Can this be used with a full size DSLR with Nikon 300mm f4 AF-S (non VR version) lens collar attached to gimbal? Would it still tilt upwards fully when balanced or would camera be too low and hit lower edge of gimbal?

A: Yes, it can handle a DSLR and large lens, and will angle up to about 45 degrees.

Q: 7. Will the PH10 Gimbal head work with a long prime lens (eg: 600mm f4)? I am not asking if it will support the weight. I want to know if the lens can be properly balanced on the gimbal head without the side of the lens rubbing on the side of the gimbal arm. Also, is the gimbal head sealed properly, in case it is used in sand and near salt water?

A: The Gimbal will work with lenses up to 33lbs. If you need to balance a longer lens than the included plate allows for you could consider getting the Oben QR-53 Long Lens Quick Release Plate (5.3") BH #OBQR53 • MFR #QR-53.

Q: 8. Is it possible to reverse the mount to shorten the height between the base mount and the camera?

A: The Sirui PH-10 Carbon Fiber Gimbal Head is not designed for the elements to be rearranged in any way.

Q: 9. Does the PH-10 also fit the new Nikon Z 180-600mm? Not in terms of weight, but in terms of the lens axis being in the vertical p

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head will fit the Nikon Z 180-600mm without a problem.

Q: 10. Will this work with an R5 and Tamron 150-600 lens on a SLIK Tripod Pro 724 CBH?

A: Yes, the Sirui PH-10 Carbon Fiber GImbal Head can fit on a Slik Pro 724 CBH with a Canon EOS R5 and an adapted Tamron 150-600mm lens.