Camplex Tac1 Simplex Lc Fiber Optic Tactical Cable 50Ft

Camplex Tac1 Simplex Lc Fiber Optic Tactical Cable 50ft

Product Code: eq175385
Availability: In Stock

$250.47 $393.24

Qty

20 reviews Write a review

Description
Reviews (20)

The 50' (15.2 m) Camplex TAC1 Simplex LC Fiber Optic Tactical Cable 50ftfrom Camplex TAC1 Simplex LC Fiber Optic Tactical Cable 50ftmeets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The polyurethane core-locked design will be found where ordinary PVC jacket cables do not provide adequate protection in the field. The cable is machine polished and interferometer tested to industry standards.

Designed to Withstand Impact Indoor/Outdoor Rated Jacket Polyurethane Core-Locked Design Rugged & Lightweight Broadcast Deployable

Parameters
Connector 1	LC
Connector 2	LC
Cable Length	50' / 15.2 m
Fiber Type	Single Mode (Black)
Core Size	9 µm
Return Loss	RL: < 55 dB IL: < 0.25 dB
Attenuation	0.5 dB/km @ 1550 nm
Bend Radius	0.6" / 1.5 cm
Jacket Type	Polyurethane
Maximum Tensile Load	440 N
Operating Conditions	-67 to 185°F / -55 to 85°C
Packaging Info
Package Weight	0.3 lb
Box Dimensions (LxWxH)	11.8 x 8.9 x 1.1"

Broadcast deployable

Indoor/Outdoor rated jacket

500 Micron primary acrylate buffer with 900 Micron secondary hard elastomeric buffer (Ultra-Fox Plus)

Crush and impact resistance due to their polyurethane core-locked outer jacket

Designed to withstand crush and impact after deployment

Strong, lightweight, and durable

Temporarily deployed cables that can be retrieved for repeated use

Related Questions and Answers

Q: 1. What size Arca Swiss mount do I need to fit the included Arca Swiss Plate?

A: The Tiltaing Lightweight Kit for Sony a7S III (Tactical Gray) (B&H# TITAT18A) has an Arca-compatible dovetail on the bottom of it for mounting it in an Arca-compatible quick release clamp. It is a particular standard, so it will fit in most Arca-swiss clamps. Here's a good example of one: Oben QRA-A2 Quick Release Assembly with QR-10 Plate (B&H# OBQRAA2) https://bhpho.to/370LpRf

Q: 2. Does this charge the 70D?

A: The Canon LC-E6 Charger for LP-E6 Battery Pack listed above may be used to charge the Canon LP-E6 Rechargeable Lithium-Ion Battery Pack (7.2V, 1800mAh) which is included with the Canon EOS 70D DSLR camera. While it does not charge the Canon EOS 70D itself (you would need an AC adapter to provide continuous power to the camera -- the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras, B&H # CAACKE6), the Canon LC-E6 Charger for LP-E6 Battery Pack is the correct charger that was originally included with the Canon EOS 70D DSLR camera.

Q: 3. The plate between the camera/cage and the base plate is arca swiss, manfrotto or propietary?

A: As stated in the key features of the Tilta Tiltaing 15mm LWS Baseplate Type IV (Black) the Tilta Tiltaing 15mm LWS Baseplate Type IV (Black) Slides and locks onto a Tilta-standard dovetail baseplate.

Q: 4. can you access the battery well without taking the cage off?

A: Yes you can. There is an opening on the bottom of the cage that allows access to the battery port.

Q: 5. Is it compatible with Tilta BMPCC 4K/6K cage?

A: No it is not. It is designed specifically for the 6K Pro Cage

Q: 6. What type of base plate does this accept if I want to use it without bmcc6k cage?

A: The Tilta Tiltaing 15mm LWS Baseplate Type VI (Black) accepts any Arca Swiss quick release plate or cage with an Arca Swiss attachment.

Q: 7. How much space is needed to set up and use the cutter? TIA

A: The working space would need to be larger than the length of the trimmer which is 46".

Q: 8. Does this charger work for the Canon EOS R?

A: Yes. The following unit will charge your LP-E6 batteries.

Q: 9. does this cut 8 ply mats and foam core?

A: Logan Graphics 750-1 Simplex Elite Mat Cutter (40" Cut Length) BH #LO7501 comes with the 701-1 Straight Cutter that cuts up to 3/8" foam board and the #5000 8 Ply Bevel Cutter that cuts 8 ply mat board.

Q: 10. Lost the A/C power adapter for the LC-2J, anyone knows where I can buy a replacement?

A: I contacted IDX. They have the proper AC power adapter for the LC-2J available.They request that you contact them at your earliest convenience.IDX19001 Harborgate Way, Suite 105Torrance, CA 90501 USATel: +1-310-328-2850Fax: +1-310-328-8202E-mail: idx.usa@idx.tvservice.usa@idx.tv

Malenky	27/09/2024
[0.3 lb] I have a reel with just one channel on it, but found out it's cheaper to buy this cable and just remove the bracket from the LC side. Comes right out without cutting anything. 5

Samuel	26/09/2024
[LC] Well made product! 5

John	15/09/2024
[LC] For Tactical fiber cables, these are ultra light weight, but they do take a beating! Great Cables! 5

Abylay	12/09/2024
[440 N] Wish the fiber cable was little thicker. 5

Bryan L.	06/09/2024
[LC] Works as expected 5

James	06/09/2024
[440 N] Perfect solution instead of re-ending long fiber runs. Product is well made and works great. Make sure you match the fiber mode. 5

Aaron	26/08/2024
[440 N] Cable worked as expected. We use it for our field camera on football game days. We can move all over the field without a signal drop. 5

Christopher	23/08/2024
[440 N] i purchased this to run in a drop ceiling in a large building. i didn't want anything to hurt the fibre, so i wanted it armored. (I EVEN ACCIDENTALLY RAN THIS CABLE OVER WITH A SCISSOR LIFT!!) this armored cable is a beast! THIS CABLE DID NOT WORK FOR ME AT FIRST! i was sweating bullets trying to figure out what was wrong! i called their customer service and figured out quickly that they are manufactured as CROSSOVER cables. i had to pop the plastic duplex connector off one end and swap the two fiber cables. then all worked beautifully! LOVE THE PRODUCT! 5

Tim	06/08/2024
[440 N] We use this to get audio/video to the front and back of large conference rooms, works great. The cable is only as thick as a single regular XLR cable. 5