Arca-Swiss Variokit Monoballfix Cameraplate Universal

Arca-swiss Variokit Monoballfix Cameraplate Universal

Product Code: eq175397
Availability: In Stock

$219.00 $264.99

Qty

6 reviews Write a review

Description
Reviews (6)

With dimensions of 2.4 x 1.5", the Arca-Swiss Variokit MonoballFix Cameraplate Universalfrom Arca-Swiss Variokit MonoballFix Cameraplate Universalis compatible with a wide range of equipment. Featuring the Variokit designation, this model can have its dovetail rotated to be perpendicular to the plate itself, allowing you to move the camera horizontally. It is compatible with the classic Arca-Swiss monoballFix quick release system so you can easily attach or detach your camera from the tripod while shooting. Made of aluminum for durability, the plate attaches to your camera via a standard 1/4"-20 screw.

For Classic Arca Quick Release System Dovetail Rotates in Relation to Plate 1/4"-20 Mounting Screw Durable Aluminum Construction Dimensions: 2.4 x 1.5"

Parameters
Mounting	1x 1/4"-20 Male
Strap Loop	No
Quick Release Plate Type	Classic Arca Swiss
Quick Disconnect System	No
Bubble Level	No
Materials	Aluminum
Dimensions	2.36 x 1.5" / 60 x 38 mm
Packaging Info
Package Weight	0.13 lb
Box Dimensions (LxWxH)	5.1 x 3.3 x 0.5"

Related Questions and Answers

Q: 1. is this compatible with 1dx canon camera?

A: Sorry for late reply. I don't have 1dx but this plate fit for my 5DMKIII.

Q: 2. Is the screw itself fixed to the plate, or does it turn? If it turns, does it require a wrench (Allen Wrench, perhaps)?

A: The screw does turn and it will require an Allen wrench.

Q: 3. Will this work on an Arca-Swiss C1 Cube? (CLAARC1CC 8501003.1)

A: Yes, the Arca-Swiss monoballFix Cameraplate for Select SLR Cameras is compatible with the Arca-Swiss C1 Cube Geared Head with Arca Classic Quick Release.

Q: 4. Pin holes in the photo does not match the one in arca website with same product code (https://www.arca-shop.de/en/camera-plates/monoball-fix-series/247/monoballfix-slrindex-60-camera-plate?c=18) can you please confirm if it's same product and photo here is wrong ?

A: The Arca-Swiss monoballFix Cameraplate for Select SLR Cameras is the same product shown on the Arca-Swiss website with the sku #802270.

Q: 5. Will this fit/work on a 6d?

A: Yes, this plate is compatible with the Canon 6D.

Q: 6. Is this compatible with a Nikon D750?

A: Yes, it is compatible with a Nikon D750, assuming you have a Monofix ball head. This plate is not the standard Arca type plate.

Q: 7. is this compatible with 1dx canon camera with a 70-200 mm 2.8 lens?

A: I have this on a Nikon 750 body and do not use large lenses on this body. It would work but this plate is not as substantial as a full size arcs-swiss compatible plate.

Q: 8. Will this suit a Fuji X-T5, and not obstruct the battery door to prevent it from fully opening?

A: This plate will not interfere with the battery door on the xt5

Q: 9. Does this have a soft top to it (so it's not hard metal against the camera)?

A: There is a rubber grip on the top of the plate that keeps the plate in place without scratching the camera body.

Q: 10. Hi, is this plate compatible with the Canon 5DmkIII ? Does the little pin fit the dslr corretcly ?Thanks !

A: Yes, the Arca-Swiss Slidefix Quick Release SLR Camera Index Vario Plate Kit is compatible with the Canon 5D Mark III.

John	26/09/2024
[Aluminum] Because the lens is set a little to the left of center (as seen from the back) this plate still allows the battery/SD card compartment to open fully without having to detach the QR plate. Sweet! Love the Arca-swiss quick release system! 5

Neon	23/09/2024
[Aluminum] I must admit, I tried to get other plates for my P0, which has the slidefix QS quick release, to save some money. The cost savings resulted in plates that didn't properly fit and wasted time. These however, do the job they're intended for. Save the headache and just get them for your P0 with the quick release. 5

Sina	13/09/2024
[0.13 lb] If you don't have any classic Arca Swiss gear and are looking for a minimalistic camera plate, give the MonoballFix system a try. The baseplates are small and the head clamps are very solid and nice to work with. 5

Michael	07/09/2024
[Aluminum] High quality product. Fits the Arca Swiss pO Classic perfectly. It goes into the narrow channel between the 2 small pins which stops it slipping out even when the clamp isn't done up tightly. Attaches to the 5D3 nicely. The supplied locator pin (which is probably easy to lose if the plate is removed) prevents rotation of the plate.Apart from the price it's perfect. 5

Keith	22/05/2024
[0.13 lb] I had some doubts before I order this product whether it would fit on my Contax 645. I wanted the pins to keep the heavy camera from slipping, especially in portrait orientation. Unable to find a measurement from the mounting screw to the pins I took a chance, and it fits perfectly. It's another precision made and expensive device made by Arca Swiss. Its actually two pieces of metal that fit inside each other and can be completely separated. Mine came with an allen wrench! 5