The Manfrotto MK190XPRO4-3W Aluminum Tripod with 3-Way Pan/Tilt Head combines the MT190XPRO4 tripod legs with the MHXPRO-3W 3-way pan/tilt head. The tripod has a load capacity of 26.5 lb, extends up to 68.1", and folds down to 24.4" for transport.

The Quick Power Lock System allows you to completely extend the tripod legs with one hand. Once set up, you can use the tripod's rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto's 90° column feature to get your camera down to only 3.1" above the ground. You can attach an extending arm or bracket to hold lights or reflectors via the Easy Link plug built into the tripod's spider.

The MHXPRO-3W atop of the tripod is a compact pan/tilt head with retractable handles that can be extended as needed. Two knobs control the friction for the front-to-back and side-to-side tilt, allowing you to fine tune the movements based on the weight of your gear. Three leveling bubbles ensure your composition is level on all axes. A 200PL quick-release plate with a 1/4"-20 camera mounting screw is included.

Load Capacity: 26.5 lb    Max Height: 68.1"    Min Height: 3.1"    Folded Length: 24.4"    Leg Sections: 4    Weight: 6.8 lb    Quick Power Lock System    90° Center Column    Quick Power Locks

Related Questions and Answers

Q: 1. Anyone who has this tripod and head (MK190XPRO3-3W), can you recommend a decent quality tripod carry case (preferably a padded one) that this will fit into? It would need to be at least 6 deep, 6 wide and at least 29 long. There is one Manfrotto tripod bag (MBAG 75PN) that people say is a bit too small for this tripod; and the other Manfrotto bags are way too expensive for my budget. Any assistance would be greatly appreciated.

A: I would recommend the Ruggard Deluxe Padded 35 Tripod case.It has two internal straps to hold the tripod from moving.Also, if you plan on using a heaver camera or lens with this Tripod, please look into getting the Manfrotto 200PLARCH-14 Architectural Anti-Twist Quick Release Plate with 1/4-20 Screw to eliminate Camera Creep/Slipage when using the Tripod in Vertical/Portrate mode.

Q: 2. Hi-Does this kit include quick release plate that attaches to camera base or must that be purchased separately.Please let me know. Thanks!

A: The Manfrotto MK190XPRO4-3W comes with an included 200PL Quick Release Plate.

Q: 3. Hello! I am wondering how well would this head (as compared to a fluid video head) would work for occasional video taking of surfers? Quick moving subject under a lot of light. Thanks

A: If you're using a regular pan tilt head for video instead of a fluid head, then the smoothness of the footage will depend entirely on how well you can move the arms on your own. Starts/stops will be jerky. It probably won't be the best footage possible but it will do the job in a pinch.

Q: 4. Can this tripod be folded up and fit into the carrier bag without removing the handles?

A: It comes with a standard Manfrotto tripod bag, and it fits in the bag fully assembled.If it doesnt have this accessory, I suggest you might be looking at a 3rd party tripod, or vendor built bundle.Hope this helps.

Q: 5. Has anyone used "Manfrotto MT055XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head" for stitched panoramic 360?images? If so, does it enable proper stitching?

A: You could certainly use this tripod/head for pano's but there are much better heads out there specifically for shooting 360. You can purchase legs separate, then buy the head. Click on the link below to view pano heads; https://bhpho.to/37YDkZM

Q: 6. How does this differ from B&H # MA190XPRO4Q5 (B&H Kit), apart from the price difference?

A: The MT190XPRO4 has a higher load capacity, and the MK190XPRO has a much shorter minimum height.

Q: 7. Is the MK190XPRO4-BHQ2 compatible with the Peak Design base plate? Thanks..

A: If you get the dual plate it will be compatible. You can click on the link to view; https://bhpho.to/36HaSK9

Q: 8. If it doesn't come included, can this tripod accept an adjustment bowl adapter which allows you to level the camera independently of the tripod legs quickly? Manfrotto even has their own.

A: You will need to use a 3/8"-16 leveling base such as the Manfrotto 438 (https://bhpho.to/3GGankY). The Manfrotto 190XPRO4 does not accept the Manfrotto 555 leveling center column, nor can it use 75mm/100mm half-ball leveling adapters/bowls.

Q: 9. Does this tripod come with a quick release plate? I recently purchased the Manfrotto L bracket and want to make sure it's compatible.

A: Yes it does come with Manfrotto 200PL Quick Release Plate

Q: 10. can the pan feature be locked ?

A: Yes. The 3 ways that the head can be locked are vertical tilt, horizontal tilt, and panning.