This 100' American DJ 3-Pin DMX Cable 100'from American DJ 3-Pin DMX Cable 100'is used to control lighting effects remotely via DMX or in Master/Slave interconnected mode. Well suited for production companies, it features heavy-duty connectors and a PVC jacket with no memory.

Heavy Duty Connectors    3-Pin XLR    PVC Jacket    No Memory    Control Effects with DMX or Master/Slave

Related Questions and Answers

Q: 1. do you Daisy-Chaining them?

A: yes you can daisy chain the dimmer packs

Q: 2. What is the pin-out configuration of this cable? Thank you.

A: ADJ the manufacture does not list the Pin-out on that cable. It is a pretty standard DMX lighting cable adapter, 3 pin female to 5 pin male.

Q: 3. What is all the colors of wire within the cable? Is there a total of 5 wires?

A: American DJ Accu-Cable 5-Conductor DMX Cable Spool (300') BH #AMAC5CDMX300 offers 5 wires (5 conductors). Pair Color Code: Green/Black/Red/White

Q: 4. are all 5 of the pins wired?

A: yes all 5 are wired

Q: 5. Wire Gauge? AMP current capacity? Shielding type?

A: The following cable is a 24 awg cable which is shielded and can support a current amp capacity of 14.2 amps.

Q: 6. does this work with FotodioX Pro FACTOR 1 x 2 V-4000ASVL Bi-Color Dimmable LED Studio Light?

A: The system referenced is made for conventional par lights and would not be ideal for what you are likely trying to do. This setup is for units without an internal dimmer such as a 500 watt Par can. The unit that you refer to states that it is controllable via dmx but I cannot seem to find how many control channels it uses, so I would assume one and its just for dimming although the color temp seems to be adjustable also so it may be more channels. I would ask B and H about that part. I would recommend the SDC12 if you just want manual control of the dimming and no programming or scene recall. The description refers to DMX as the control source and also that it is 3 pin so there isn't any reason I can think of that this controller wouldn't work.If you want programability I recommend something like the ADJ DMX Operator or the Elation Show Designer 1 for more intricate programming.

Q: 7. can this be used to control a skypanel from an analog dmx board?

A: This is compatible with DMX capable devices.

Q: 8. Does the ADJ Pinspot Quad change colors automatically without DMX?

A: Yes, the American DJ Pinspot LED Quad DMX has auto modes and sound activation.

Q: 9. Does it carry Phantom Power? No mention of shielding either.

A: This will carry phantom power. Here are more technical specs: • Inner conductor: 4 x 2 conductors / Bare Copper 7 x 0.20 mm (22 AWG) • Number of conductors: 8 • Inner conductor section: 0.22 mm² • Isolation: HDPE 0.95 mm • Conductor twisting: Yes • Outer jacket: PVC • Outer jacket color: Black • Outer jacket diameter: Ø 6.5 mm

Q: 10. When using several of these can I sync them? For example, if I place units on the same DMX channel, set the speed to 4 flashes per second and then enable them by setting the intensity from 0 to my desired level will they begin flashing at the same time and maintain synchronization? Alternatively, can I control individual flashes by setting a slow flash rate and then retrigger by setting intensity to zero and then back to get a "flash on demand"?

A: According to the manufacturer when on a control board they will sync and act as one unit.