The clear Westone Audio ES/UM Pro Replacement Cable MMCX Clear 52"from Westone Audio ES/UM Pro Replacement Cable MMCX Clear 52"is used for the Adventure Series, ES, AC, UMPro, and W Series in-ear monitor headphones. The detachable cable terminates in a 3.5mm stereo mini connector.

Replacement Cable    Straight Twisted with MMCX Connector

For Adventure series, ES, AC UMPro, and W series monitors

Related Questions and Answers

Q: 1. Would this work with a Canon 100 macro or would I have to get close to a 60?

A: My understanding is that if you use a lens larger than about 60mm, you would need to add extension tubes between the larger lens and your camera to retain the entire slide dimensions within your camera's viewfinder.

Q: 2. I have a Tamron 60 macro, and shoot with a Nikon 850. will this work with the ES-1?

A: This is made for Nikkor 55mm f/2.8 Micro-Nikkor witch has 52mm filter thread and Tamron is 55mm, so you will need step up ring , but the 60mm will crop the slide abbot 10% that's the reason it will not work for me

Q: 3. Can you put a filter on the front of the lens hood? If so, what size?

A: The thread on the front is not a standard size and will not accept threaded filters.

Q: 4. Are nuts or clips to fasten the bolts (screws) included?

A: The PRO Tec Replacement In-Line Skate Wheels have two screws included,however, there are no nuts or clips included.

Q: 5. Hi is this lens hood aluminium or plastic?

A: This is made of plastic.

Q: 6. Has anyone used the Tamron 60MM F2 macro lens with this adapter?

A: No. I used it with a Nikon 60mm lens.

Q: 7. Does this unit really extend to 80"?

A: Yes, the Ultimaxx UM-TRMP80BK 80" Aluminum Tripod with Monopod has a maximum height of 80" when the center column is fully extended.

Q: 8. What is the softness of this wheel? (according to skate ratings)

A: The MFR does not specify a hardness rating.

Q: 9. Anyone work on a older Protec Flugel + Trumpet case? Mine does not have screws and I'd likely have to drill out the axle.

A: PRO TEC lists the PRO TEC Replacement In-Line Skate Wheels (Set of 2) as being compatible with the following models. There is no guarantee it will work with anything else: IP110WL IP301DWL IP301TWL IP301QWL PB301VAX PB304SOPWL PL253

Q: 10. Can I make this work with a Canon RP? A step down adapter s easy, but I don’t have a macro lens. I do have a 24-105mm f/4 and a NiSi closeup adapter.

A: No, this is meant to work with Nikon macro lenses.