The AtlasIED TSD BlueBridge 2x2 DSP Audio Processorfrom AtlasIED TSD BlueBridge 2x2 DSP Audio Processoris a platform designed for sound reinforcement and AV applications. The DSP Processor can provide audio and Ethernet connectivity for TCP/IP third party control and programmability. Using microphone preamps from THAT Corporation and 24-bit converters, this processor obtains a low noise floor. The 40-bit floating point DSP engine is designed to prevent digital clipping and to obtain maximum speed and power to process advanced algorithms in complex system designs. The unit can operate on any network, and when connected, the processor will be recognized and controllable. The TSD BlueBridge processors offer fixed application embedded designs and the ability to design custom drag and drop systems. The TSD processor can be used for system designs that require limited I/O's, but require a modern DSP platform. The design can be used as a standalone device to run a sound system or as a supplement to an existing system.

Drag and Drop architecture

Mic or Line selectable inputs

Balanced high gain outputs

Output peak and signal indicator LEDs

Low noise floor

THAT Corp mic preamp

Ethernet network connectivity

24 dB converters

48 kHz, 40-bit floating DSP engine

External power supply included

Related Questions and Answers

Q: 1. What are the dimensions and weight of the base?

A: The Atlas Sound SB36WE base measures 15" from corner to corner, but unfortunately we do not have a spec for the weight of the base alone.

Q: 2. Why don't inputs 2,3,4 (B, C, D) on the 8k function? Only input one (or A) works!

A: When receiving an 8K signal, the Blackmagic Design Ultimatte 12 8K Keyer/Advanced Compositing Processor uses all 4 inputs for the single 8K signal as quad link is required for the full 8K resolution.

Q: 3. Hello, the "what's in the box" does not list the magnet (BH #JOM • MFR #J1504). Do I need to buy it separately?

A: No, you do not need to buy the Magnet. It doesn't show on our website, but the magnet does come with this kit.

Q: 4. will the ac power supply attach to the control box with the gold mount version?

A: You should be able to attach the power supply to the back of the controller for the amaran F22x 2x2 Bi-Color LED Flexible Mat (Gold Mount) BH #AMF22X22BCAM.

Q: 5. Can I use it to develop 4x5 film ?

A: The Jobo SilverBase Compact Rotary Film Processor with Tank and Reel Kit can be used to process 4x5 film when used with this optional tank: https://bhpho.to/3ZHRj2S

Q: 6. How much weight will this support?

A: Atlas has not specified a weight capacity but they do mention that the AD-14B is designed to accommodate any microphone mounts and it can hold the weight of most standard microphones along with the mount.

Q: 7. I will the stream work for this situation I'm in. xlr mic TC-Helicon PerformV 2i2 Focusrite IRIg stream iOS(TikTok, livestream singing)?

A: There are better and simpler options for your setup. After coming out of the TC-Helicon Perform-V, instead of going into the Focusrite 2i2 and then into the iRig Stream (which has an RCA input for line level signal), a better option would be to go from the XLR output of the Perform-V to the XLR mic input of the iRig Pre HD (B&H # IKIRIGPREHD). The Perform-V has a mic level output and the Pre HD has a dedicated mic input and mic preamp. The Pre HD is an interface that will connect to your iOS device in the same manner as the Stream. It's not necessary to use two interfaces, so the 2i2 is not needed in the signal chain and all you will need is the mic, Performer-V, and Pre HD. You would also be able to connect the mic directly to the XLR input of the Pre HD if you do not want to use the Perform-V.

Q: 8. Can this be used as a live keyer for a virtual set with dynamically moving cameras? The promo materials seem to only mention fixed cameras.

A: The Blackmagic Design Ultimatte 12 4K Keyer Advanced Compositing Processor can be used in virtual sets, but the handling of foreground and background would be done with external processing.

Q: 9. How different is this keyer than say the Atem HD8 keyer or the Atem mini pro keyer?

A: The Blackmagic Design Ultimatte 12 HD Mini Keyer/Advanced Compositing Processor is much more advanced than the keyer built into the ATEM Switchers. With the Ultimatte model, you will have many more options to clean up the key.

Q: 10. Will this allow me to use an external XLR mic in Zoom? - or - Send a mic level feed to Zoom from a mix board.

A: The iRig Stream is an audio interface that allows you to connect the audio output from a mixer, keyboard, drum machine, or other line level audio to a Mac or Windows computer or to an iOS or Android mobile device. You can connect your microphone to a mixer and then connect the output from the mixer to the RCA input on the iRig Stream. The iRig Stream comes with three cables (USB Type-A, USB Type-C, and Lightning) to enable connection from the iRig's mini-DIN output to your computer or mobile device. It can be used for Zoom meetings.