The AtlasIED BlueBridge 8x8 DSP Audio Processorfrom AtlasIED BlueBridge 8x8 DSP Audio Processoris a platform designed for sound reinforcement and AV applications. The DSP Processor can provide audio and Ethernet connectivity for TCP/IP third party control and programmability. Using microphone preamps from THAT Corporation and 24-bit converters, this processor obtains a low noise floor. The 40-bit floating point DSP engine is designed to prevent digital clipping and to obtain maximum speed and power to process advanced algorithms in complex system designs. The unit can operate on any network, and when connected, the processor will be recognized and controllable. The processor provides standard mixers, gain sharing auto-mixers, delays, equalizers, level controls, duckers, filters, as well as many other processing capabilities. This processor is UL rated and intended for use in houses of worship, restaurants, presentation and conference rooms, courtrooms, and other areas in need of sound reinforcement and AV applications.

Open architecture programmability

THAT Corp microphone preamps

Ethernet network connectivity

TCP/IP third party control capability

Low noise floor

Four logic inputs/outputs

48 kHz, 40-bit floating DSP engine

EQ modules include parametric, graphic, and anti-feedback

Crossover modules include Butterworth, Linkwitz Riley, and Bessel with slopes from 6 to 48 dB per octave

Filter modules include high shelf, low shelf, and all pass

Mixer modules includes a gain sharing auto-mixer, a gating auto-mixer, a matrix mixer, a standard mixer, a LR mixer, and a LCR mixer

Generator modules come in sine tone, sign sweep, white, and pink

Dynamic modules include a compressor, expander, limiter, and ducker

Output peak and signal indicator LEDs

Safety listed to UL60005

Related Questions and Answers

Q: 1. What are the dimensions and weight of the base?

A: The Atlas Sound SB36WE base measures 15" from corner to corner, but unfortunately we do not have a spec for the weight of the base alone.

Q: 2. Can you do c-41 with it?

A: The Jobo SilverBase Compact Rotary Film Processor with Tank and Reel Kit does not offer temperature control, which is required for C41 or E6 processing. The Jobo CPE would be recommended for color film processing: https://bhpho.to/4do6IJy.

Q: 3. Which 8K-capable cameras can be used with Ultimatte 12? What about the URSA 12K?

A: There are very few cameras that output 8k at this time. But Studio camera systems like the Sony UHC-8300 is one option. https://bit.ly/3xsWeG0

Q: 4. How much weight will this support?

A: Atlas has not specified a weight capacity but they do mention that the AD-14B is designed to accommodate any microphone mounts and it can hold the weight of most standard microphones along with the mount.

Q: 5. I have read the two reviews of this item. It appears they the threading is of a very close tolerance. As far as I'm concerned that is a good attribute. My question concerns the locking mechanism itself; i.e., part A tolerance to part B. If you have already bought this and have had it in service for some while, I'm asking if the joint is solid and without any free play of tolerance. Yes, I have an Atlas MS20C. It would be much nicer to have a quick connect between the shaft and base because as we all know, it is typical to separate the two pieces during transport. Also, I'm know from experience that hasty and often assembly / disassembly of the base from the shaft invites the risk of stripping threads. On paper, this device looks very useful and I would definitely buy it if I only knew that it has a very solid fit between the halves with no wobble at all. Thank you very much.

A: Atlas as you well know makes excellent products. I cannot guarantee the QR-2 will not have some play to it. As the connection is not a thread its ball bearing.

Q: 6. what else should i get to make a copllete virtualset epuipment ?

A: You will need at least 1 Ultimatte 12 and an Ultimatte Smart Remote 4 to control them and key your set. You will also need cameras and a virtual set software.

Q: 7. Can I use it to develop 4x5 film ?

A: The Jobo SilverBase Compact Rotary Film Processor with Tank and Reel Kit can be used to process 4x5 film when used with this optional tank: https://bhpho.to/3ZHRj2S

Q: 8. Can i use a 4k camera with internal recording and send video signal via hdmi at the same time? Does it downscale automatically?

A: The Blackmagic Design Ultimatte 12 HD Mini Keyer/Advanced Compositing Processor does not downscale at this time. It would be recommended to check with your camera's capability to record 4K internally and send a 1080p signal via HDMI in order to confirm compatibility.

Q: 9. Can this be used as a live keyer for a virtual set with dynamically moving cameras? The promo materials seem to only mention fixed cameras.

A: The Blackmagic Design Ultimatte 12 4K Keyer Advanced Compositing Processor can be used in virtual sets, but the handling of foreground and background would be done with external processing.

Q: 10. For 3 keys cameras do I have to buy 3 Blackmagic Design Ultimatte 12 4K Keyers for each camera?

A: The Blackmagic Design Ultimatte 12 4K Keyer Advanced Compositing Processor is used with a single camera, and if you have multiple cameras in your production that need keying, you will need multiple Blackmagic Design Ultimatte 12 4K Keyer Advanced Compositing Processor.