The Da-Lite 24874 65x116" Electrol Tensioned Ceiling Screenby Da-Lite 24874 65x116" Electrol Tensioned Ceiling Screenis a ceiling-recessed screen designed to keep a room with clean lines. Its 65 x 116" viewing area has a 16:9 aspect ratio and 133" diagonal. 12" of black drop at the top allows for extra space to deploy your screen, handy for high-ceiling installations. Provided trim on the screen conceals the rough opening cut in the ceiling to install the screen.

HD Progressive 1.3 is designed for applications where projector brightness and screen size require an increase in gain. It has a gain of 1.3 and a 75° half angle. It offers accurate color reproduction and can handle some ambient light. The surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This seamless surface is also GREENGUARD GOLD certified.

133" Diagonal / 16:9 Aspect Ratio    Integrated Camera Shelf    HD Progressive 1.3 Surface    1.3 Gain, 150° Viewing Angle    12" Top Black Drop    Black Backing    Tensioning Cable System    White Case    Includes Low Voltage Control    Includes Three-Position Control Switch

Integrated video conferencing camera shelf (camera sold separately)

Slim-Tab, a lower profile, and stronger tab design to keep your screen taut

Smooth Roll Technology to keep your screen flat

Tensioning Cable System to prevent warping and ensure even lateral tension

White powder-coated case for a clean aesthetic

Standard black backing retains projected brightness on front projection surfaces

Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you want to use an IR or RF remote to control your screen

Related Questions and Answers

Q: 1. Can power output be controlled from the iPhone app?

A: Yes, but you need the portable wireless transmitter EL-Skyport WiFi, then select the it on your iPhone's wifi settings

Q: 2. What is the load capacity?

A: The capacity is not listed, but the Manfrotto Lite-Tite Swivel Umbrella Adapter BH #MA026 is designed to support umbrellas.

Q: 3. Has anybody seen a lit of the various flash durations for these? I know they report 1/800th at full power, but what are the flash durations at, say, 1/2, or 1/16th? I can't find anything like this listed anywhere. I'm considering the new HS transmitter, and these durations are going to be important.

A: Hi,There is no published flash duration data for lower settings. Generally, theFastest flash duration is always at full flash power for our units, and it gets slower when you decrease flash power.The reason is that by reducing the flash power you also decrease the capacitor voltage and lower voltage will give a longer, slower flash duration. This rule does not apply for ELC units as they are using a different technology.A global rule at minimum power the flash duration will be around 40% slower.I hope this helps.Regards,Will HBrand Manager Lighting, MAC Group US

Q: 4. If I'm using Phottix Indra, do I still need to get an external receiver?

A: The Indra has a receiver built in.

Q: 5. Is this motor compatible with the SmallRig Wireless Follow Focus Controller Kit? BH #SM3917 • MFR #3917

A: According to the manufacturer, the SmallRig Wireless Follow Focus Controller Kit (B&H # SM3917) is compatible with the focus motor on the SmallRig Wireless Follow Focus Lite Kit.

Q: 6. Is the honeycomb grid and hood diffuser included in this set? If not, do you have anything that will work with this set?

A: A softbox is included for each head in this kit. However, there are no grids available to fit them. For grids to fit the lamp heads using a reflector, you may consider the Elinchrom Reflector and Honeycomb Grid Set, B&H # ELCGS8.25 . https://bhpho.to/36ARezX

Q: 7. does the guaranty covers/applies to mexico?

A: As long as the purchase was from B&H, it applies. However any warranty work will have to be performed by MAC Group in New York.

Q: 8. does this work with the Vello Captain Freewave?

A: The internal receiver does not work with the Vello FreeWave Captain. If you use a receiver on the light then you will be able to use the Vello FreeWave Captain.

Q: 9. Can the motor be powered by DTAP to USB C?

A: Yes, the SmallRig Wireless Follow Focus Lite Kit can use a D-Tap to USB-C as long as it has PD power.

Q: 10. Does the modeling light stay on during flash? I'm hoping to use this at low power with a large aperture...

A: You can set the modeling lamp on the D-Lite RX4 to stay on while the flash fires.