You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Da-lite 24879 69x110" Electrol Tensioned Ceiling-recessed Screen

Da-lite 24879 69x110" Electrol Tensioned Ceiling-recessed Screen
  • Product Code: eq175501
  • Availability: In Stock

$104,340.00 $129,381.60

The Da-Lite 24879 69x110" Electrol Tensioned Ceiling-Recessed Screenby Da-Lite 24879 69x110" Electrol Tensioned Ceiling-Recessed Screenis a ceiling-recessed screen designed to keep a room with clean lines. Its 69 x 110" viewing area has a 16:10 aspect ratio and 130" diagonal. 10.5" of black drop at the top allows for extra space to deploy your screen, handy for high-ceiling installations. Provided trim on the screen conceals the rough opening cut in the ceiling to install the screen.

HD Progressive 1.3 is designed for applications where projector brightness and screen size require an increase in gain. It has a gain of 1.3 and a 75° half angle. It offers accurate color reproduction and can handle some ambient light. The surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This seamless surface is also GREENGUARD GOLD certified.

130" Diagonal / 16:10 Aspect Ratio    Integrated Camera Shelf    HD Progressive 1.3 Surface    1.3 Gain, 150° Viewing Angle    10.5" Top Black Drop    Black Backing    Tensioning Cable System    White Case    Includes Low Voltage Control    Includes Three-Position Control Switch

Key Specs
Front/Rear ProjectionFront
Aspect Ratio16:10
Diagonal130.0" / 330.2 cm
Gain1.3
TensionedYes
Type
SeriesConference Electrol
Front/Rear ProjectionFront
Aspect Ratio16:10
StyleCeiling-Recessed
Dimensions
Viewing Area69.0 x 110.0" / 175.3 x 279.4 cm
Diagonal130.0" / 330.2 cm
Extra Top Drop10.5" / 26.7 cm
Surface
Gain1.3
Viewing Angle150 degrees
MaskingAll Four Sides
TensionedYes
Black BackingYes
Controls
MotorStandard
Low Voltage ControlYes
Casing
Length143.1" / 363.5 cm
General
Voltage120 VAC/60 Hz
Weight390.0 lb / 176.9 kg
Packaging Info
Package Weight674 lb
Box Dimensions (LxWxH)149 x 30 x 25"

Integrated video conferencing camera shelf (camera sold separately)

Slim-Tab, a lower profile, and stronger tab design to keep your screen taut

Smooth Roll Technology to keep your screen flat

Tensioning Cable System to prevent warping and ensure even lateral tension

White powder-coated case for a clean aesthetic

Standard black backing retains projected brightness on front projection surfaces

Low Voltage Control allows the screen to be controlled via a low voltage signal or momentary dry contact from a third-party control system. The LVC is necessary if you want to use an IR or RF remote to control your screen

Related Questions and Answers

Q: 1. Will this fit on the new Lastolite Joe McNally Ezybox Speed-Lite 2 Plus? (B&H # LALS2430JM) (MFR # LL LS2430JM)

A: Yes it will

Q: 2. does this work with the Vello Captain Freewave?

A: The internal receiver does not work with the Vello FreeWave Captain. If you use a receiver on the light then you will be able to use the Vello FreeWave Captain.

Q: 3. Is this motor compatible with the SmallRig Wireless Follow Focus Controller Kit? BH #SM3917 • MFR #3917

A: According to the manufacturer, the SmallRig Wireless Follow Focus Controller Kit (B&H # SM3917) is compatible with the focus motor on the SmallRig Wireless Follow Focus Lite Kit.

Q: 4. Will these flashes work on the Panasonic GH5?

A: These flashes will work with a Panasonic GH5.

Q: 5. Does the modeling light stay on during flash? I'm hoping to use this at low power with a large aperture...

A: You can set the modeling lamp on the D-Lite RX4 to stay on while the flash fires.

Q: 6. I had previously ordered this and it came with an EL-Skyport Speed Transmitter. Does it still include this remote trigger?

A: Unfortunately, a transmitter is not included with the Elinchrom D-Lite RX One Flash Head. A compatible option is the Elinchrom EL-Skyport Transmitter Plus, BH # ELSTP. https://bhpho.to/3c95qbf

Q: 7. Can the motor be powered by DTAP to USB C?

A: Yes, the SmallRig Wireless Follow Focus Lite Kit can use a D-Tap to USB-C as long as it has PD power.

Q: 8. Guys Do you think I can use this Softbox with a Strobe head light also ? or just speedlite flash ?

A: Absolutely you can use this with a strobe as well as a speedlight! It is made easier though if you purchase the Westcott Appolo Mounting Arm as well, since the strobe can mount to the arm then stick out the bottom of the softboz allowing access to the controls on the back of the strobe. Without the arm, the strobe is completely inside the softbox which means you either have to reach up through the zippered compartment on the bottom, or pull off the front diffusion panel to change your power settings.

Q: 9. Would this work nicely on the AD600 and AD200?

A: This Medium Apollo will pair nicely with the AD200. I would suggest using it with the bare bulb in a rear facing position to maximize the spread of light in the modifier. The size of the AD600 and therefore the fit inside the box may not make it ideal unless you use the accessory H600b remote head.

Q: 10. Can I use with Amaran COB 60d?

A: The Aputure Light Storm LS 60x Bi-Color LED Light BH #APLS60X does not have an umbrella port so it cannot be used with an apollo softbox which mounts via an umbrella shaft.

25/09/2024

[120 VAC/60 Hz] This Screen was easy to install. It took 3 people and 2 ladders to get the job done. The remote is really not needed but i opted to install it as well. The motor runs really smooth. The screen is nice and wide. A really good buy.

5
21/09/2024

[674 lb] I installed in my living room in between ceiling joists. It works great. I use it with a Panasonic HD projector. It impresses everyone who walks in the room. Has a clean appearance when retracted. Note: it didn't come with a 12v trigger as both the B&H customer service rep and myself thought it did. We both misunderstood the description (it's optional.) The part was available at Da-Lite for $80 and came with no instructions. I got it to work after a few emails and chats with da-lite. Also, I ended up placing some holes in the top of the case to mount using 8 Lag bolts into the 2nd story floor structure. All the hardware that comes with it assumes you will have access to hang it from the top which requires access via the side while it's in it's final position. I was putting it in a hole the size of the case in my finished ceiling so that method would not work ( I would have had to remove and re-install a lot of drywall). I knew this before I purchased by reading the installation instructions so no worries just a fact and maybe a consideration for future changes to the case or just the directions.

5
06/09/2024

[Yes] Looking forward to getting all of this stuff together

5
05/08/2024

[674 lb] This product fit our need perfectly. Correct size for our stage and social hall.

5
04/08/2024

[Yes] I used this screen in a small conference room and it was very simple to instal.

5
27/07/2024

[149 x 30 x 25"] I love this product, Easy to install and and look even better on the wall.

5
22/07/2024

[Yes] Assembly for very straight forward. Looks great on the wall. Really like the velour wrap around the frame. It does a very good job of rejecting light back onto the screen. Because of the size, (110 inch) I decided to put up a folding screen to cover it when not in use.

5
21/07/2024

[1.3] We used the screen at our annual and special town meeting and found that it was better than anticipated. the powerpoints were projected so all could see no matter where they sat at our meeting. I couldn't be happier and worth the price.

5
15/07/2024

[150 degrees] We use the screen in our church sanctuary once or twice a month. Installing it was an adventure with the weight and length, but several sections of scaffolding and a couple friends made the install move along nicely. The instructions for wiring were right on and it worked first try! The image is right on and visible the entire length of our viewing area (over 100').

5
27/06/2024

[Front] We installed this in a rehabbed church space that's now a contemporary art gallery flush mounted it to an exposed beam and it looks and works great. That said, it's only been about a week, so maybe I'll report back later if I have any complaints! I was surprised that, for its length, there are only 2 mounting holes on either end, so I fear that it may sag over time. But again, too soon to tell. Where it does mount in those 2 places, it's on a solid plastic end cap/brace, so it seems like it will hold up well. It weighs about 85 pounds, so we had 3 people to install. We had to go about 17 feet up to the beam, we leveled, marked and pre-drilled & drove lag bolts into the beam and then used two extension ladders on either side to climb and carefully slide the projection screen/case up on the ladder's rails. Our 3rd person was on a 10ft ladder in the middle and was there as a spotter for extra support. It was then quite easy to hook it on to the lag bolts once we slid it to the top. All in all, it's an easy install, we opened the box and had the job done in less than 4 hours. Just be sure you have the wiring supplies and the proper mounting hardware and you'll have no problem!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Da-lite 120x192" Tensioned Ceiling-recessed Screen

$55,521.00 $85,502.34

Da-lite 108x192" Tensioned Ceiling-recessed Screen

$55,041.00 $69,351.66

Da-lite 24855 Tensioned Ceiling-recessed Screen

$33,651.00 $40,381.20

Da-lite 146" Tensioned Electrol Ceiling Screen

$69,627.00 $96,781.53

Da-lite 24747lsi Motorized Tensioned Screen 69x110"

$15,870.00 $21,265.80

Da-lite 24860e Tensioned Motorized Screen 69x110"

$21,786.00 $32,679.00

Da-lite Tensioned Advantage Deluxe 69x110" Screen

$22,272.00 $27,840.00

Products You May Like

Audiolab 9000a 100w Stereo Amplifier Black

$7,650.00 $9,333.00

Msi Aegis Rs Gaming Desktop Computer

$6,597.00 $8,048.34

Rrs Mobile Phone L-clamp With Dovetail Jaw

$435.00 $648.15

Intel Core I9-14900kf 3.2 Ghz 24-core Processor

$1,326.00 $2,121.60

Wooden Camera 3/8"-16 Slider For Canon C70

$105.00 $149.10

Hp 16" Elitebook 660 G11 Notebook

$4,153.50 $5,524.15

Canare Starquad Xlrm Cable 100' Green

$269.85 $326.52