The Blackmagic Mini Converter SDI to Analog 4Kfrom Blackmagic Mini Converter SDI to Analog 4Kallows you to convert Single Link SD/HD/3G/6G-SDI to analog SD/HD component, composite, or S-Video. The down-converter lets you to connect professional SDI equipment which outputs resolutions up to Ultra HD 4K (3840 x 2160) and DCI 4K (4096 x 2160) with SD and HD analog video monitors and other equipment. With a compact form factor and easy-to-use controls, the Mini Converter is ideal for a variety of broadcast, post production, and professional AV applications.

Using 6G-SDI technology, the Mini Converter supports resolutions up to UHD 4K at up to 30 fps and DCI 4K at 24 fps. The Mini Converter also supports Single Link SD, HD, and 3G-SDI signals and automatically detects the input video format and instantly changes. A redundant SDI input is provided as an optional back up, and an SDI loop-through output is available for sending the SDI signal to an additional device. Up to 16 channels of de-embedded SDI input audio can be outputted as AES/EBU digital audio or balanced analog audio output via 1/4" output jacks.

The Mini Converter's settings are controlled using the built-in DIP switches or via USB using the included software for Max OS X or Windows computers. The USB port also enables the firmware to be updated. For powering the device, a 12V power supply is included with international socket adapters.

Single Link SD/HD/3G/6G-SDI Input    Component, Composite, & S-Video Output    SD, HD, UHD 4K & DCI 4K Input Signals    Automatic Input Signal Detection    Redundant SDI Input & Looped SDI Output    Analog & AES-EBU Digital Audio Outputs    24-bit, 48 kHz Audio    Control via DIP Switches or Software    USB 2.0 Port for Firmware Updates    12V Universal Power Supply Included

• 4:2:2 Sampling and color precision
• 24-bit, 48 kHz audio sampling
• Compliant with SMPTE 292M, SMPTE 259M, SMPTE 296M, ITU-R BT.656, and ITU-R BT.601 standards

Related Questions and Answers

Q: 1. I have a Swann SDI camera and I have a new HD BNC Qsee recorder. Will this units output give me a usable HD BNC signal?

A: No, it will not. This will only give you a standard analog output, maybe wide screen but nevertheless it will be analog.

Q: 2. Does this unit perform time base corrections (TBC) or 3D comb filtering on the incoming analog signals?

A: No. There is no TBC or corrections on the conversion.

Q: 3. Will this convert a 35mm film camera output (analog) to SDI signal (Digital) ?

A: No, this is a converter to go from SDI to analog. Here is a converter that will convert from analog to SDI: https://www.bhphotovideo.com/c/product/558906-REG/Blackmagic_Design_CONVMAAS_Mini_Converter_Analog_to.html?sts=pi&pim=Y

Q: 4. What is the bit depth of the S-video to SDI A/D conversion?

A: 10-bit.

Q: 5. Can someone recommend a piece of hardware to duplicate xlr audio ? I have two inputs and would like to have 8 outputs to run into these audio injectors since they don't have xlr loop through.

A: You could look at the Behringer DS2800 2-Input/8-Output Distribution Splitter for Commercial Applications, BH #BEDS2800. https://bhpho.to/31kTDhj

Q: 6. Will this down convert from 4k HDMI to HD SDI?

A: From the BMD website: HD up and down conversion But the manual is useless and doesn't elaborate further.

Q: 7. What is the image quality like converting HD-SDI to HD Component? Are there any artifacts or a loss of resolution? I have an HD CRT that I'd like to use, but it only has analog HD inputs. Cheers!

A: HD-SDI Digital HD was a step up in image quality over Component Analog HD. So in a critical analysis, yes, you will see a slight difference. But for casual use, there is no loss in quality to the degree that it would interfere with your use or enjoyment of your CRT display. After all, it was what we had for years and were quite happy with it.

Q: 8. Timecode output.Is it LTC?

A: You may chose to extract timecode from the SDI input instead of audio out the XLR. Yes it is LTC.

Q: 9. I need to convert analog video on a BNC to SDI on a BNC. Can I put analog BNC on the Y connector input and will it convert it to SDI?

A: No-Sorry this unit will convert SDI to analog. They do make a unit to do what you need. Blackmagic Design Mini Converter Analog to SDI B&H # BLASDIMC MFR # CONVMAAS2

Q: 10. Can this unit be used to adjust the audio volume or do you need to attach an audio mixer for that functionality?

A: There are no audio level controls. Audio stays in the embedded data untouched.