The Da-Lite 24431 65x104 UTB Contour Fixed Frame Screen HD 1.3has an ultra-thin bezel and acid etched black aluminum frame for keeping the audience's focus on projected content. The HD Progressive 1.3 surface has a 1.3 gain and 150° viewing angle, with black backing to prevent bleed-through and retain brightness. Its low-profile flat-panel design allows it to sit 1.38" off the wall. The front lip of the bezel is .25" wide all around the viewing surface, which sits .13" off of the inner frame component.

The HD Progressive 1.3 surface is ideal for applications where projector brightness and screen size require an increase in gain. The pure white HD Progressive surface offers true color reproduction and allows for more flexibility with ambient light conditions. The seamless surface also allows for easy viewing of detail in video as well as charts and graphs in a corporate setting. The screen comes with reinforced black binding on all four sides. The surface wraps around the frame and attaches to it with metal grommets. The HD Progressive 1.3 surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified.

123" Diagonal    16:10 Wide Format    Ultra-Thin Bezel Frame    Acid Etched Black Frame    HD Progressive 1.3 Surface    1.3 Gain & 150° Viewing Angle    Black Backing Retains Brightness

Related Questions and Answers

Q: 1. is power supply included with device?

A: Yes it is: In the Box: Freakshow HD Micro Split 4K/12G Reclocking DA with Standard Connector Power Supply Limited 1-Year Warranty

Q: 2. Has anyone tried this teleconverter with the K3ii and the Pentax 150-450mm zoom lens?

A: Yes, users say the teleconvertor will magnify any positive or negative issues with the lens. One reviewer says "I was still very impressed, based on my experience with my K1 plus DFA 150-450 mm". Knowing that this teleconvertor is made for crop sensor cameras, using the K3ii, the results will be even better.

Q: 3. How many channels of embedded audio does this pass through? Also, what's the latency of the SDI signal if used to split a viewfinder output?

A: The Freakshow HD Micro Split 4K/12G Reclocking DA with Standard Connector will embed audio on all channels. You should experience little to no latency.

Q: 4. Is the focal length transmitted to the camera corrected? For example, if used with a 200mm, is the combination 200mm + 1.4x converter transmitting the info 'focal length = 280mm' to the camera? (Important for stabilization)

A: It does register if you use it with a Pentax lens. It shows 420mm with my DA*300mm F4 and 140mm with my Pentax 100mm WR. Not sure about the rest. Probably so if you you a fast lens. Dont know about non Pentax lenses.

Q: 5. Will it work with Pentax K-5 and 150-450mm 4.5-5.6 lens?

A: Yes, its compatible but you will probably lose autofocus on the long end.

Q: 6. Product description mentions an “optional heating device”. What would that be?

A: An example of a dew heater for the Pentax HD Pentax DA* 11-18mm f/2.8 ED DC AW Lens is this Neewer 15.7" USB Lens Heater for Camera & Telescope Lenses. https://bit.ly/3OaLkNn

Q: 7. I just purchased this softbox and unfortunately, I bent the rods when trying to put it together. I didn't have the color-coded speedring and didn't read the directions closely enough on the speedring that I purchased. Do you know if replacement rods can be purchased? I've tried to bend them back into shape but haven't been successful so far and my softbox looks wonky.

A: Im sorry to hear about the rods. You may contact Profoto to obtain the replacement rods using the following link: http://bit.ly/2axA9ZF

Q: 8. Would this work with the A1? Or which softbox would work with the A1?

A: No

Q: 9. Hi, will this convert my MF lenses to AF lenses? I understand the older Pentax SMC-F 1.7x will allow me to AF my manual lenses? Thanks for your time and advice!

A: No it does not. Only the older Pentax-F 1.7x does that. It was designed to work with Pentax-A manual focus lenses as a transition to auto-focus. No other TC I know of does that.

Q: 10. Does the Pentax 1.4x HD Converter work with the K-1 Camera? If so, does it work using FA (full-frame) lenses under the camera's full-frame mode?

A: Yes, the Pentax 1.4x HD PENTAX-DA AF Rear Converter AW for K-Mount Lenses will work with the K-1 camera, and with Pentax FA "full frame " lenses. It is important to connect the converter to the lens first, then attach the lens to the camera .