Belden 1694A Rg6 Low Loss Coaxial Cable 1000'

Belden 1694a Rg6 Low Loss Coaxial Cable 1000'

Product Code: eq17554
Availability: In Stock

$1,767.00 $2,721.18

Qty

11 reviews Write a review

Description
Reviews (11)

Styled in blue and measuring 1000' in length, the 1694A RG6 from Belden is a roll of low-loss serial digital coaxial cable. An 18 AWG spool of RG-6/U type cable, the 1694A RG6 utilizes a bare copper conductor with gas-injected foam HDPE insulation, a Duofoil tinned-copper braid shield, and a PVC jacket.

18 AWG Bare Copper Conductor Gas-Injected Foam HDPE Insulation Duofoil Tinned-Copper Braided Shield PVC Jacket

Parameters
Conductor	Coax #: 1 AWG: 18 Stranding: Solid Material: BC (Bare Copper) Diameter: 0.04" / 0.10 cm
Insulation	Material: Gas-Injected FHDPE (Foam High-Density Polyethylene) Diameter: 0.18" / 0.46 cm
Outer Shield	Layer 1: Outer Shield Trade Name: Duofoil Type: Tape Material: Aluminum Foil, Polyester Tape Coverage: 100% Layer 2: Type: Braid Material: TC (Tinned Copper) Coverage: 95%
Outer Jacket Material	PVC (Polyvinyl Chloride)
Max. Recommended Pulling Tension	69 lb / 31.3 kg
Min. Bend Radius	Minor Axis: 2.75" / 7 cm
Compliance	NEC/(UL) Specification: CMR CEC/C(UL) Specification: CMG EU Directive 2011/65/EU (RoHS II): Yes EU CE Mark: Yes EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes EU RoHS Compliance Date: 01/01/2004 EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire and Cable): Yes MII Order #39 (China RoHS): Yes RG Type: 6/U UL Flame Test: UL1666 Vertical Shaft CSA Flame Test: FT4
Suitability	Indoor
Plenum/Non-Plenum	Non-Plenum
Impedance	75 Ohms
Inductance	(µH/1' [0.3 m]): 0.106
Capacitance	(pF/1' [0.3 m]): 16.2
Velocity of Propagation	82%
Delay	(ns/1' [0.3 m]): 1.240
Conductor DC Resistance	DCR @ 68°F / 20°C (Ohm/1000' [304.8 m]): 6.4
Outer Shield DC Resistance	DCR @ 68°F / 20°C (Ohm/1000' [304.8 m]): 2.8
Attenuation	Frequency in MHz, Attenuation dB 100' / 30.5 m 1.000, 0.240 3.580, 0.440 5.000, 0.520 6.000, 0.570 7.000, 0.610 10.000, 0.710 12.000, 0.780 25.000, 1.080 67.500, 1.650 71.500, 1.690 88.500, 1.860 100.000, 1.950 135.000, 2.240 143.000, 2.300 180.000, 2.570 270.000, 3.170 360.000, 3.690 540.000, 4.600 720.000, 5.380 750.000, 5.500 1000.000, 6.420 1500.000, 7.990 2000.000, 9.370 2250.000, 10.010 3000.000, 11.780 4500.000, 14.920
Minimum Return Loss	@ Start Frequency of 5 MHz: Stop Frequency: 1600 MHz Min. RL: 23 dB @ Start Frequency of 1600 MHz: Stop Frequency: 4500 MHz Min. RL: 21 dB
Operating Voltage	UL: 300 V, RMS
Operating Temperature	-22 to 167°F / -30 to 75°C
UL Temperature Rating	167°F / 75°C
Length	1000' / 305 m
Weight	48 lb / 21.8 kg
Packaging Info
Package Weight	47 lb
Box Dimensions (LxWxH)	16.5 x 16.5 x 11.5"

Related Questions and Answers

Q: 1. is this rated for use in plenum?

A: No. Refer to the Belden Master Catalog for the plenum version of this cable. I believe it is 1695A but that part number may have changed.

Q: 2. Which compression crimper is best for this product and Belden's 1694A cabling? I can't find a clear answer online.

A: The Belden CPLCRBC-BR Double Bubble Compression Tool is the recommended crimper for Belden 12 GHz UHD BNC Compression Connector for 1694A RG6 Coax Cable.

Q: 3. Will the Platinum Tools SealSmart PROCON Compression Tool work with this connector?

A: This is a BNC connection, which the tool you mentioned is compatible with. It should work fine with that tool. I can tell you though that we recommend the Comprehensive EZ-Tool, B&H # COEZCPCT, specifically for this connection. https://bhpho.to/2ElmXJi

Q: 4. Can this connector be soldered as well?

A: The Belden HD BNC 3-Piece Crimp Connector for 1694A RG6 Coax Cable is a compression connector and not normally soldered.

Q: 5. Dose this connector can be use for " DRAKA 1.0/4.8 AF - 75 OHMS HDTV 5GHZ"?

A: This is specifically for 1694A RG6 Coax cable.

Q: 6. Does this Belden 1694A RG6 connector work with PCT international TRS SERIES RG 6-59 PCT-RH-CT compression tool? I think it does but double checking...

A: We are not familiar with that tool, however we do know that this connector will work wit the Platinum Tools 16220C SealSmart II Compression Crimp Tool, B&H # PL16220C. https://bhpho.to/2LFHVqx

Q: 7. Im looking make short custom cables that will run 12g signal. Up to how many feet should keep my cables to prevent degradation?

A: This cable is not strong enough for 12G-SDI. Here in an option that will work. https://www.bhphotovideo.com/c/product/1555368-REG/belden_4855r_1000_blk_12g_sdi_75_ohm_4k.html

Q: 8. is this support 3 g sdi and what is the max length?

A: Yes, the Belden 1694A RG6 Low Loss Serial Digital Coaxial Cable (500', Black) supports 3G signals and can allow up to 255 feet for 3G-SDI.

Q: 9. Is the contact on this crimped as well?

A: this is a crimp on BNC terminator designed to be crimp attached to SDI cables

Q: 10. can I run sdi-3g ?

A: Yes, this cable is rated for 3G-SDI.

Jim	11/09/2024
[47 lb] I bought this cable after talking to a sales person that told me it doesn't have foot markings on the cable. I was pleasantly surprised to find foot markings on it when I received it. 5

Eloho	13/08/2024
[UL: 300 V, RMS] great cable... solved all my hd live coverage cable tenth problems. I was able to run over 250ft from HD-SDI camera to mixer with no hitches. 5

anyonymous	24/07/2024
[Indoor] This cable is the one you especially want for long runs with and SDI cable. The solid copper center wire is what make it superior to the less expensive rg-6 wire, If you do not want problems use this. B&H shipped very fast and the cost of the shipping was reasonable. 5

EddieJ-WAV	17/07/2024
[48 lb / 21.8 kg] When the least amount of loss is critical, nothing beats Belden 1694A 5

Carson	26/06/2024
[75 Ohms] Quality cable! I chose to terminate with Canare BCP-B53 and can vouch for the combo. 5

Marty	07/06/2024
[Non-Plenum] Can't go wrong with this cable. I have installed thousands of feet of this cable without any issues. 300 foot lengths without signal drops. It isn't the most flexible of cables, but a stable signal is more important than how it feels in your hand. 5

Dan	13/05/2024
[69 lb / 31.3 kg] No issues. Used the recommmended BNC connectors and it is ending video signal just fine. 5

Leif	01/05/2024
[48 lb / 21.8 kg] Durable, great signal characteristics, blah blah blah. This is where it's at. 5

Logan	27/04/2024
[UL: 300 V, RMS] Purchased some pregerminated Canare cables that didn't make it a full season, all of our 169a self terminated cables are still going strong. 5

Gordon	21/04/2024
[Non-Plenum] I originally purchased this cable to complete a PTZ camera install at the church I attend. I was able to install 4 Sony cameras and connect them to a BlackMagicDesign ATEM. Utilizing this cable and Belden SDI connectors we were able to make this job flawless in a minimum amount of time. I've recently purchased my second roll to outfit our 4 projectors with updated connections. 5