The Anton Bauer Dual Charger Gold Mount Performance Seriesallocates the most power to the highest-charged battery first , ensuring that you'll have a fully charged battery as soon as possible. The Performance Series is 40% more efficient than previous Anton/Bauer chargers by employing faster processing, using a smaller transformer in the power supply, and drawing less amps.

This Gold Mount version supports the concurrently released Digital Battery Series Gold Mount batteries and all previous Anton/Bauer models, and it's capable of simultaneous, multi-chemistry charging. Common to the Anton/Bauer name, a feature called InterActivity allows the charger to communicate with an Anton/Bauer battery and assign the best charge routine possible based on the battery's cell chemistry and the best termination algorithm possible (TCO, -ΔV temperature compensated VCO, dT/dt, CCO, FUL, or I-min), ensuring better overall life. A 4-pin XLR output allows you to power your camera right out of the charger via an XLR cable or converter cable. This can be done off of wall power at the same time as charging your batteries or off of attached batteries if the charger is unplugged. The batteries in the latter case are hot swappable so you can power your camera with uninterrupted power.

The charger features a simple-to-use, touchscreen display that provides activity and status updates and access to management functions. It also supports an optional Wi-Fi software feature that will allow you to remotely manage the health and status of one or more Performance Series chargers.

Allocates to Most-Charged Battery First    40% Increased Efficiency    Simultaneous, Multi-Chemistry Charging    4-Pin XLR Output for Powering Cameras    Assigns Best Charge/Termination Possible    Touchscreen Activity/Management Display    Supports Optional Wi-Fi Control Software    Ergonomic Design; One-Hand Carry Handle

• Allocates the most power to the highest-charged battery
• Supports simultaneous, multi-chemistry charging
• 4-pin XLR output for powering your camera off of wall power or battery power
• Assigns the best charge routine possible based on the battery's cell chemistry
• Assigns the best termination algorithm possible
• Simple-to-use touchscreen activity, status, and management display
• Ergonomic design with one-hand carry handle
• Supports optional remote health and status management software feature

Related Questions and Answers

Q: 1. What is the charging current on this model?

A: 1.5A

Q: 2. The AB website says this will charge a battery in about 3 hours. Is the charge time affected by whether I have 1 or 2 batteries on charge? If yes, how so?

A: The 3 hour approximation is for a single battery, thus for a second battery, you would double that approximation.

Q: 3. Can someone tell me where I can find the mount to mount this to aManfrotto 635 FAST Single Tube Carbon Fiber Tripod please? What mounts will I need? Thank you Jason

A: You can mount the Titon battery to one of the tripod legs with a battery plate+clamp. Here are examples of such battery plates with clamps: https://www.bhphotovideo.com/c/product/1606755-REG/smallrig_2886_v_mount_battery_adapter_plate.html https://www.bhphotovideo.com/c/product/1578324-REG/digitalfoto_solution_limited_vs01_clamp_v_mount_battery_plate_with.html https://www.bhphotovideo.com/c/product/1509727-REG/watson_mi_vm_sclamp_micro_v_mount_plate_with.html https://www.bhphotovideo.com/c/product/1477606-REG/bebob_factory_gmbh_vmm_micro_standholder_v_micro_battery_plate_with.html https://www.bhphotovideo.com/c/product/1560445-REG/bebob_factory_gmbh_amm_micro_standhol_a_micro_battery_plate_with.html

Q: 4. On average, how long will this battery power the Canon C300iii?

A: The Anton/Bauer Titon 150 Gold Mount Lithium-Ion Battery with good health, should provide between 4 and 5 hours on the Canon EOS C300 Mark 3.

Q: 5. The AB website says this charges a battery in about 3 hours. Is that true for charging 1 battery? 2 batteries? Or is the charge time not impacted by how many batteries are being charged?

A: The 3 hour approximation is for a single battery, thus for a second battery, you would double that approximation.

Q: 6. Can 2 14.4V batteries power the Gemini 1x1 at 100% with this adapter? (while using batteries made by another brand than Anton?)

A: If using (2) Gold Mount batteries that are 200 Wh or higher in total power, it can run the Gemini 1 x 1 at 100 %. The actual run time depends on the watt-hour rating of the batteries.

Q: 7. Will this battery work with the URSA Mini Pro 4.6K with V mount plate?

A: Yes it will.

Q: 8. What is the expected battery life for one battery on the Blackmagic URSA mini pro 12K?

A: Using oner of the Anton/Bauer 4 x Titon 90 Gold Mount Batteries and GM2 Charger Kit might give you around one hour of operation on the Blackmagic Design URSA12K, depending on how you are working with the camera.

Q: 9. Can you power a Aputure Nova 300c with it so it replace the dual battery bay from Aputure?

A: The Aputure Nova P300C requires 24-48V whereas this charger's XLR output is 16.7V.

Q: 10. Can you use this charger to charge 4 Dionic XT 90 Gold Mount 99Wh 14V?

A: The Anton Bauer GM4 Quad Micro Battery Charger can charge two regular-size Gold-Mount batteries.