You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Gra-vue Sd-sdi To Composite Converter With Audio Embedding

Gra-vue Sd-sdi To Composite Converter With Audio Embedding
  • Product Code: eq175644
  • Availability: In Stock

$4,844.85 $7,025.03

The Gra-Vue SD-SDI to Composite Converter with Audio Embeddingis an expansion board the requires the 1RU version of the XIO-series rackmount frame. The card takes a single NTSC or PAL SD-SDI input and converts to one composite analog output. So the signal can pass to downstream devices without requiring a separate distribution amplifier, the SDI input is also looped back out on two mirrored outputs. Along with video, this converter will also embed two stereo pairs (4-channels) of analog audio into the SDI stream.

Digital to Analog Video Conversion    2 x Composite Outputs    2 x SDI Looping Output    4-Channel Audio Embedding    For 1RU XIO Frame

Parameters
SDI Video InputConnector: 1 x SD-SDI on BNC
Impedance: 75 ohm
Format: NTSC, PAL; 525i60, 625i50; SMPTE 259M-C; 270Mb/s
Maximum Cable Length: <656' (200 m) using Belden 1694A cable
Reference InputConnector: 1 x Composite on BNC
Format: NTSC, PAL; 525i60, 625i50; SMPTE 259M-C; 270 Mb/s
Audio ConnectorsInput:
Connector: 4 x 3-pin balanced terminal block connectors
Maximum Level: +24 dBu (0 dBFs)
SDI Video OutputConnector: 2 x SD-SDI on BNC
Impedance: 75 ohm
Format: NTSC, PAL; 525i60, 625i50; SMPTE 259M-C; 270Mb/s
Level: 800 mV ±5%
Jitter: <0.2 UI (100 kHz)
Analog Video OutputConnector: 2 x Composite on BNC
Impedance: 75 ohm
Format: NTSC, PAL; 525i60, 625i50
Status IndicatorSignal status indicator, power indicator -- indicated by illuminating or extinguishing a green LED

A composite reference input and built-in frame sync allows the outgoing signal to be synced with external sources such as a common house clock. This is ideal in live switching environments to ensure a glitch-free transition between cuts

Automatic signal equalization enables incoming SDI cable runs of up to 656' when using Belden 1694A cable

Provided LED lights to indicate the status of signals and power supply

Supports SNMP, and can be managed and monitored remotely across a network using XIO NET

Designed for use in broadcasting systems, studios, and other professional video fields

Related Questions and Answers

Q: 1. The manual implies this is "yes" but I'd like confirmation. After embedding 8 channels of AES/EBU into SDI on Channels 1-8, can I output the SDI into another BMD Audio to SDI Mini and embed another 8 channels of AES/EBU audio into 9-16... outputting a single SDI cable with all 16 channels of AES and video?

A: Absolutely, I do this quite often. Just some simple dip switch settings.

Q: 2. If I use two separate audio inputs can I separate them to right and left channels?

A: Yes, you can separate them.

Q: 3. What is the latency between the SDI video and analogue audio?

A: According to Blackmagic Design, the Mini Converter SDI to HDMI has a delay of less than a single line of video, except when it needs to convert PsF to P, which will take one frame. The Analog to SDI has a four line delay.

Q: 4. If I wanted to try and get 8 channels of analog audio embedded - would I be able to use 2 of these units in series?

A: The Blackmagic Design SDI to Audio Mini Converter is designed to de-embed audio. You would need the embedding version, which would be the Blackmagic Design Audio to SDI Mini Converter, B&H # BLCOMCAUS2.

Q: 5. Can you delay the audio to sync with the video? Looking to use without a computer. Audio from Mixer and Video from PTZ Camera. I will need to sync the audio, can this be done?

A: From working with this device, there is no way of delaying the audio source at all.. You can change the setting to where the analog audio is being set to the SDI stream. Like 1-4 or 5-8, etc Hope this helps.

Q: 6. Can this ONE device be connected to one output on an atem constellations and extract audio from 2 diff inputs?

A: No. The Blackmagic Design SDI to Audio Mini Converter SDI outputs contain mixed program audio only. However, you could loop a single input through this converter and extract that audio.

Q: 7. I can make convert the video by using Blackmagic Design SDI to Audio Mini Converter but there is no sound( I mean I cant hear the voice on my tv what shall I do ?

A: Make sure you've got your dip settings correct for the type of audio, aes/ebu or analog and you're decoding the correct channels your audio is on. You should play around with your dip switch settings and try different configurations.

Q: 8. can i give stereo sdi input and receive stereo output?

A: Yes, stereo will work, as this device can handle up to 4 channels of analog signal and 8 channels digital.

Q: 9. What is the latency between the SDI video and analogue audio?

A: According to Blackmagic Design, The Mini Converter SDI to HDMI has a delay of less than a single line of video, except when it needs to convert PsF to P, which will take one frame. The Analog to SDI has a four line delay.

Q: 10. Will this de-embed audio on SDI 1080p59.94?

A: Yes, the Blackmagic Design SDI to Audio Mini Converter will de-embed audio on SDI 1080p59.94.

26/09/2024

I bought this to interface my laptop with and older TV, but I use it mainly to record movies from my satellite receiver (HDMI out). It gives me consistently good quality (within the limits of composite). The composite output of my receiver, by contrast, is prone to color fluctuations. Oh, and with the older TV, it performed equally well.

5
18/09/2024

goodgood

5
06/09/2024

Got the job done for a venue that still had an old rca video system!

5
17/07/2024

Worked as advertised

5
07/07/2024

I needed to connect Chromecast to my older HD television which lacks HDMI ports. This converter was the perfect solution. Plugged in the Chromecast and used a 3 RCA to 3 RCA cable to connect the video and audio outputs to a composite video input on the TV. Worked flawlessly right off the bat. The converter is powered by a separate supplied cable. In the US just be sure that the NTSC/PAL switch next to the output jacks is set to NTSC. This product was a lifesaver; I can now cast any web page, including videos of course, to my TV.

5
24/06/2024

Use the S-Video to HDMI Converter to connect an old analog video system to a new Digital TV. Without this device the entire system would have to be replaced. That was infeasible.

5
07/06/2024

Used this on one of 4 outputs of an HDMI switch always having DHCP/ EDID problems into even more expensive composite converters. Tis inexpensive converter worked 1st time and every time since even with any combination of inputs and outputs selected on the 4X4 HDMI matrix switch.

5
02/06/2024

Needed to connect sound and video equipment that has HDMI and composite connections. Everything is working great so I'm happy!

5
26/05/2024

The converter works great & pleased with the quality output. It was easy to install.

5
04/05/2024

Hooked it up to my HDMI camera and connected the composite side to the projector as well as a video mixer. Worked for both devices the first time without any hassle. Thanks!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Gra-vue Sd-sdi To Composite Converter With Audio

$3,329.85 $4,395.40

Gra-vue Sd-sdi To Composite Converter 3ru

$2,723.85 $4,330.92

Gra-vue Sd-sdi To Composite Converter 1ru

$2,723.85 $4,276.44

Products You May Like

High Image Quality Digital Camera

$195.96 $290.02

Leica Vintage Leather Neck Strap Black

$330.00 $402.60

Bescor Mm-12nc Starved Electrolyte Battery

$452.97 $683.98

Nikon Af-s Nikkor 70-200mm F/2.8e Fl Ed Vr Lens

$7,040.85 $9,505.15

Hoya 62mm Diffuser No. 1 Filter

$119.97 $171.56

Easyrig Vario 5 Cinema Flex Vest With Quick Release

$13,395.00 $17,145.60

Motorized Screen For Projector

$12,441.00 $16,048.89

Lefeet Sup Mount Kit For S1/s1 Pro Scooter

$297.00 $463.32