You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Gra-vue Xio 9030hdemb-2aes-1u 2-channel Aes Embedder

Gra-vue Xio 9030hdemb-2aes-1u 2-channel Aes Embedder
  • Product Code: eq175646
  • Availability: In Stock

$5,753.85 $8,573.24

The Gra-Vue XIO 9030HDEMB-2AES-1U 2-Channel AES Embedderfrom Gra-Vue XIO 9030HDEMB-2AES-1U 2-Channel AES Embedderis a modular board for installation in XIO series rackmount frames. It allows the insertion of two user selectable audio channels from the SDI stream via balanced AES terminal block connectors. In addition to being able to select the audio group these channels are embedded two, it is also possible to select which stereo channel (right or left) they are panned two. For example, the outputs can follow the inputs, both inputs can be sent to right channel, or both inputs can be sent to left channel.

The board features two mirrored SDI loop outputs so that video can be delivered to two downstream destinations without requiring a separate distribution amplifier. It will pass both SD and HD resolution signals, and supports bandwidths up to 1.5 Gb/s (HD-SDI).

Note: This version is configured for the 1RU frame. There is another model available if you use the 3RU frame.

Embeds Two AES Channels to SDI    Supports SD and HD-SDI up to 1080p    Dual Mirrored SDI Outputs    For XIO Series Rackmount Frames    For 1RU Frame

Parameters
SDI InputConnector: 1 x HD/SD-SDI on BNC female
Impedance: 75 ohm
Maximum Cable LengthUp to < 328' (100 m) when using Belden 1694A
Reference InputNone
Digital Audio Input (AES/EBU)Connector: 4 x Balanced 3-pin terminal block
Maximum Level: +24 dBu (0 dBFs)
SDI Output2 x HD/SD-SDI on BNC female
Impedance: 75 ohm
Level: 800 mV ±5% Jitter: <0.2 UI (100 KHz)
Supported FormatsSD: 625i50, 525i60
HD: 1080i50/60, 720p50/60, 1080p24/25/30, 1080psf24
Supported StandardsSMPTE 259M-C (270 Mb/s), SMPTE 292M (1.485 Gb/s)
Status IndicatorSignal status indicator, Power indicator (indicated by illuminating or muting a green LED)

Automatic signal detection. Supported signals include: 625i50, 525i60, 720p, 1080i, 1080p, and 1080psf

Audio group to embed to may be selected via DIP switches

Provides automatic signal equalization to enable cable runs up to 328' when using Belden 1694A cable

Supports hot swapping of connectors

Provides LED lights to indicate the status of signals and power supply

Supports SNMP, and can be managed and monitored in real-time using XIO NET via an Ethernet interface

For use in broadcast television and other professional video applications

Related Questions and Answers

Q: 1. Tele Vue 2.0x Powermate (2") - does this allow 1.25" eyepieces as well?

A: Yes. The Tele Vue 2.0x Powermate (2") comes with an adapter for 1.25 inch eyepieces.

Q: 2. Can you replace the bulb easily if it burns out?

A: Yes it is easy to change the bulb

Q: 3. Is a power cord supplied, not just the adapter?

A: Pana-Vue Pana-Scan Slide and Film Scanner comes with a USB cord and a US /AC adapter. You can connect the Ac adapter on an outlet or use computers and even power banks to power your film scanner.

Q: 4. Will Tele Vue's FoneMate work with the iPhone 13 Pro Max?

A: The Tele Vue FoneMate Universal Digiscoping Adapter BH #TEFMSPEPA • MFR #SFA-0001 will work with any phone or phone and case under 4.7 x 8.3"

Q: 5. Batteries?

A: No batteries needed. You just point the viewer at a diffuse bright light. A lightbox is ideal (B&H sells many), but bright daylight or a bright light shone through a diffuser or off a white wall will do fine.

Q: 6. Wondering about level of JPG compression. File resolution is stated at 22MP (interpolated 4200 dpi) or 14MP (direct 3200 dpi), but what are the actual jpg file sizes (in Mb)?

A: Unfortunately the level of compression is not specified for this scanner. File sizes will vary based on what is scanned. 22MP scans will typically be around 7MB. 14MP scans will typically be around 4MB.

Q: 7. Good day,I got a Celestron NexStar Evolution 9.25 last week and from the reading it seems that it would benefit greatly from better eyepieces than the supplied stock ones.The telescope has Focal Length 2350 mm and Focal Ratio 10.I'm reading good things about the TeleVue Ethos.I was thinking about getting the Ethos 21mm. Would that be a good choice for my telescope?Also the Ethos SX 4.7mm, but maybe it would be too much power for my telescope? The supplied stock 13mm seems quite shaky as it is, using it from my apartment balcony.For the Ethos 21mm I would need 2 diagonal. Would TeleVue 2 Everbrite Diagonal - Satin be a good choice? Would it fit my telescope?Or maybe the Meade Series 5000 Dielectric Diagonal (2 ) as it seems to be supplied with Schmidt-Cassegrain to 2 adapter?Would there be a big difference between these two diagonals in the picture quality or not really on my telescope?What is the advantage of getting Ethos 21mm and Ethos 10mm versus Ethos 21mm and a 2x Barlow?Any advise/recommendations would be appreciated.Thanks.Regards,Andrej

A: I would personally go with the 21mm Ethos model. The 4.7mm will be overkill I think. You could still use it, but you would notice some shake for sure. I would go with the Meade 5000 Series for the Diagonal that would be a better choice. If you have any other inquiries like this please e-mail us at a href= http://sportoptics@bhphotovideo.com. target= _blank sportoptics@bhphotovideo.com./a

Q: 8. The slides I have are quite old - circa 1960.. Each slide has been encased in metal. Will the slide go into the viewer as is?

A: Yes - I found some old slides my father had that are in an Airequipt Slide Changer holder each slide is in a metal frame. Each individual slide will fit in my Kaiser diascop mini 3 but only horizontally

Q: 9. How do I hook up to T V to look at pictures on the television?

A: You connect the Pana-Vue to the TV with the included video cable.

Q: 10. Does it take 2 x 2 slides ?

A: I use it for viewing 35mm mounted slides, which measure 2 x2 . Side of box reads: Full coverage, big picture viewing of 35mm, and all other 2x2in (5x5cm) mounted slides.

25/09/2024

[None] This is the perfect complement to a video switch that doesn't do audio. We recently went from Black Magic to Ross and needed an audio embedder and this one is perfect! It has meters built in for you can see how much audio you are inputting.

5
19/09/2024

[None] Works perfectly out of the box.

5
27/05/2024

[None] goodgood

5
09/05/2024

[None] Worked as advertised

5
08/04/2024

[None] Easy to use; plug and play.

5
05/04/2024

[None] I've been using this for interfacing my work station software (DP10) with my Yamaha digital mixing board. It works perfectly, made to send and receive aes/ebu and spdif, as well as many channels via AVB. Motu stuff is always well made and works flawlessly.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Gra-vue Xio 9030hdemb-4aud-1u Sdi Audio Embedder

$5,753.85 $8,343.08

Gra-vue Xio 9030hdemb-4aud-3u Sdi Audio Embedder

$5,753.85 $7,077.24

Gra-vue Xio 9030hddem Hd-sdi To Aes De-embedder

$5,753.85 $8,170.47

Gra-vue Xio 9030hd 4-channel Audio De-embedder

$5,753.85 $8,112.93

Gra-vue Mvio Hdemb-2aes Sdi Audio Embedder

$6,596.85 $10,159.15

Gra-vue Xio 9040xc-2aes Sdi Cross Converter

$9,086.85 $14,266.35

Gra-vue Xio 9040uc-1u Sdi Upconverter

$6,359.85 $8,458.60

Products You May Like

Roam Adventure Rugged Case Black 83l

$1,107.00 $1,494.45

24-bay 4u Thunderbolt 3 Raid San Storage

$26,997.00 $38,335.74

8.5 X 11 Thermal Laminating Sheets 500 Ct

$490.98 $707.01

Isovox 2 Midnight Portable Vocal Booth

$2,549.97 $3,799.46

Qnap Thunderbolt 4 Male Cable 1.6' Passive

$105.00 $138.60

Lockcircle Evo Top Grip Handle - Black

$747.00 $986.04