The Gra-Vue XIO 9030HDEMB-2AES-FS-1U 2-Channel AES Audio Embedderfrom Gra-Vue XIO 9030HDEMB-2AES-FS-1U 2-Channel AES Audio Embedderis a modular board for installation in XIO series rackmount frames. It allows the insertion of two user selectable audio channels from the SDI stream via balanced AES terminal block connectors. In addition to being able to select the audio group these channels are embedded two, it is also possible to select which stereo channel (right or left) they are panned two. For example, the outputs can follow the inputs, both inputs can be sent to right channel, or both inputs can be sent to left channel.

The board features two mirrored SDI loop outputs so that video can be delivered to two downstream destinations without requiring a separate distribution amplifier. It will pass both SD and HD resolution signals, and supports bandwidths up to 1.5 Gb/s (HD-SDI).

Note: This version is configured for the 1RU frame. There is another model available if you use the 3RU frame.

Embeds Two AES Channels to SDI    Supports SD and HD-SDI up to 1080p    Dual Mirrored SDI Outputs    Frame Sync with Reference Input    For XIO Series Rackmount Frames    For 1RU Frame

Reference input with support for the following sync modes: INT, single EXT, and Global EXT

Automatic signal detection. Supported signals include: 625i50, 525i60, 720p, 1080i, 1080p, and 1080psf

Audio group to embed to may be selected via DIP switches

Provides automatic signal equalization to enable cable runs up to 328' when using Belden 1694A cable

Supports hot swapping of connectors

Provides LED lights to indicate the status of signals and power supply

Supports SNMP, and can be managed and monitored in real-time using XIO NET via an Ethernet interface

For use in broadcast television and other professional video applications

Related Questions and Answers

Q: 1. Can you replace the bulb easily if it burns out?

A: Yes it is easy to change the bulb

Q: 2. Tele Vue 2.0x Powermate (2") - does this allow 1.25" eyepieces as well?

A: Yes. The Tele Vue 2.0x Powermate (2") comes with an adapter for 1.25 inch eyepieces.

Q: 3. Can A and B speakers be on at the same time?

A: Yes, you can use both the A and B speakers.

Q: 4. Batteries?

A: No batteries needed. You just point the viewer at a diffuse bright light. A lightbox is ideal (B&H sells many), but bright daylight or a bright light shone through a diffuser or off a white wall will do fine.

Q: 5. Whats the meaning of surround output?and what is rec an line output used for?

A: The surround output on this amplifier sends power to a left, right, and center channel speaker. Record and line outputs are to bypass the amplifier and only send out signal.

Q: 6. Can i hook power subwoofer?

A: Yes, with this receiver you can connect 1 or 2 powered subwoofers.

Q: 7. Can multiple lights be connected to operate as a single unit? (Ie, I want to use a special effects feature but have multiple lights flash together)

A: To control more than one Nanlite FS-150 Daylight LED Monolight as one (or separate), you will need the Nanlite 2.4 GHz Remote Control: https://bhpho.to/2VOZMTe.

Q: 8. Can you remove the rack mount ears? lf so, what is the width without them?

A: According to Technical Pro, the Rack Mount Ears are removable. The Width of the unit will be 17".

Q: 9. How much power per channel?

A: Technical Pro offer a spec of 1500w peak output total. Unfortunately not able to provide a more accurate per channel or avaerage output specification.

Q: 10. How does one change the batteries?

A: At back of unit press both sides simultaneously and pull back. Unit housing batteries and bulb will slide out.