The Black Box USB CAT5 Extender Kit 2-Portfrom Black Box USB CAT5 Extender Kit 2-Portincludes a transmitter and receiver along with a 6' USB 2.0 cable for transmitter to host computer connection. It extends USB 1.0 or 2.0 signals over a CAT5 cable to remote USB devices. The extender supports both full-speed (12 Mb/s) and low-speed (1.5 Mb/s) throughput. The receiver has two downstream USB type (A) ports for plugging in USB 1.1 or 2.0 devices. This extender supports 130' extensions over non-networked CAT5 cabling and 278' for low-speed Human Interface Devices (HID) such as keyboards and mice.

With the CAT5 cable, you can extend connections to USB peripherals such as keyboards, mice, interactive whiteboards, and other devices without the need for external power adapters. The extender's transmitter receives power from the host computer, making it suitable for extensions in industrial control, sensor, or data acquisition applications where you are short on power outlets. The extender supplies up to 400 mA to USB devices and has industrial rated Electrostatic Discharge/Electrically Fast Transient (ESD/EFT) immunity.

This device does not require any software to your system or target devices. Simply attach the transmitter to your computer's USB port, plug in the CAT5 cable, attach the remote USB peripheral to the receiver, and start working. It works with Windows, Mac OS X, and Linux operating systems.

Supports 12 Mb/s & 1.5 Mb/s Throughputs    Extend USB 1.0 or 2.0 Signaling    130' Extension for Non-Networked CAT5    278' Extension for Low-Speed HID Device    Industrial Rated ESD/EFT Immunity    Works with Windows, Mac OS X, and Linux    Bus Powered    Plug and Play

Supports both full-speed (12 Mb/s) and low-speed (1.5 Mb/s) throughputs

Industrial rated ESD/EFT immunity

The extender supports 130' extensions over non-networked CAT5 cabling and 278' for low-speed Human Interface Devices (HID) such as keyboards and mice

Bus powered; no external AC adapter needed at either end

Plug and play

Related Questions and Answers

Q: 1. Is this compatible with a Dell Precision 3660 i9? I am running into some USB audio issues with a PreSonus Studiolive 32s.

A: All the Sonnet Allegro 4-Port USB 3.2 Gen 2 Type-C PCIe Card requires for compatibility with your system is a free PCIe x4 slot. If this slot in your computer is not occupied, the card will be compatible.

Q: 2. Can I put 4 LED light bulbs (25W or under) onto this instead of the Fluorescent ones?

A: As long as the ballast on the bottom of the LED lights you purchase fit without bumping into each other, yes, you may use LED bulbs in place of fluorescent bulbs in the Photek Brella Box Octagon Kit. (Some LED bulbs are wider than others, so the bulbs fitting may be a concern).

Q: 3. Can the width on this be adjusted down to about 60 ?

A: Yes it can. There are a few extensions on the rod so it is very versatile.

Q: 4. Can i use one stand as a light stand for “Godox SLB60W” it’s only 8 Ibs

A: So long as you do not add too much of a softbox it should be doable, but obviously it will not hold the background at the same time.

Q: 5. will this stand hold the 107 roll of savage paper?

A: Yes the cross bar for this stand will extend out to 9 ft 5 inches wide which is enough to accommodate a 107 roll of seamless paper.

Q: 6. If the maximum weight limit for this is 25 lbs!!! Then what’s the proper seamless paper to use for this??

A: Most standard rolls are approximately 15lbs. The stand is solid and has never had a problem holding the paper rolls.

Q: 7. Can the paper roll fit in the travel bag or does that need to be stored / carried separately?

A: The size roll I use, which is 9 feet or 12 feet, is carried separate from the travel bag.

Q: 8. Is the color #50 white a true white or off white?

A: #50 White is a warm white color. #01 Super White is a brighter white.

Q: 9. What expansion chasis's are recommended with this USB-C 3.2 card. Can it be connected to a Thunderbolt 2 - I assume NOT? Eg: OWC ThunderBay 4. This is USB 3.2 Gen 2x2 N/A USB 3.2 SuperSpeed USB 20Gbps 20Gbps so are there any Expansion Chassis's that can use this and also can the MP 5,3 in the slower pcie slots use all this speed?

A: It is not compatible with Thunderbolt 3. It is compatible with all USB standards. One example with USB 3.2 is https://www.bhphotovideo.com/c/product/1496990-REG/oyen_digital_3r2_2c_m_mobius_usb_c_raid_2_bay.html

Q: 10. Could you use any crossbar with this paper

A: Yes.