The HDMI EDID Ghost Black Boxfrom HDMI EDID Ghost Black Boxoptimizes video output for any display. It learns Extended Display Identification Data (EDID) from a display and ensures that your video source conforms to optimal resolution settings. The Ghost function saves the EDID of your displays and enables the source to boot with the correct settings. The unique audio inventory feature provides 5.1 and 7.1 channel audio EDID learning. A built-in rotary switch allows you to manually select and compare video resolution.

2048 x 1152 Maximum Resolution    EDID Learning Functionality    Audio Inventory Feature    Built-In Rotary Switch    15 Different Sets of EDID Data Storage    PC, AV, and Memory Modes

Displays either the default or the copied EDID on connected displays

EDID learning functionality prevents computers from deactivating ports

Audio Inventory feature provides 5.1 channel and 7.1 channel audio EDID learning; designed for home theater applications

A built-in rotary switch enables you to manually select and compare video resolution

Works in three separate modes that includes PC, AV, and memory mode

Records and stores up to 15 different sets of EDID

EDID optimizes video card output for the capabilities of the end display. This device enables the copying, emulating, cloning, and learning of EDID from a display

Works with devices, such as Blu-ray DVD players, game consoles, HD set-top boxes, LCD displays, and digital TVs

To match the display, go into the video settings table and change the video output in PC

Related Questions and Answers

Q: 1. Is it include L-serice battery plate ?

A: This kit includes two L Series battery plates.

Q: 2. How many transmitters can like to receiver?

A: While you can have several receivers picking up from one transmitter, you can't have it the other way around. One receiver cannot differentiate several signals. f you have several cameras, you will need to pair one transmitter from each camera to one receiver. You then put the signals into a professional video switcher.

Q: 3. Is this a product that could piggy back on a local Wi-Fi signal to transmit video?

A: No. It uses its own transmission.

Q: 4. How long does it last on a 7.4V 4400mah battery?

A: I have not tested this yet. I plug direct to P-Tap of rig or monitor setup.

Q: 5. Hi. Can I record 4k Raw 12 bit and at the same time transmit the signal through the hd cinegear?

A: Don't think the transmitter takes 4K. but operationally you can always loop out from either your camera or the recorder itself, presuming your recorder is at the camera end of things.

Q: 6. Does this have LUT compatibility?

A: The Ghost Eye can not augment the signal itself. It will send whatever you send down the HDMI or SDI signal, but cannot add anything. If you can send a LUT down the line, it will send the LUT.

Q: 7. How well does this work outdoors under the sun?

A: I have not had any problems with this wireless unit. I just worked in LA outside all day and it performed great. Much better than the Bolt.

Q: 8. How can I hook this on to my camcorder?

A: The bottom of the units have a female 1/4 screw mount. If you have a 15mm rod system, you can use the included CINEGEARS 15mm to 27mm Adjustable Bracket for Ghost-Eye Wireless Units B&H # CI6207. If you do not a a 15mm rod bracket. You can use this in the camcorder cold shoe Rycote 037302 Hot Shoe Adaptor with 3/8 Male Thread B&H # RYHSA or with this L bracket: Vello CB-510 Dual Shoe Bracket with Silicon Rubber Grip B&H # VECB510.

Q: 9. Is an AC adapter included for the receiver?

A: there's no AC adapter included for the receiver so you need 2 batteries to work

Q: 10. What cables are included?

A: There are 2x Two-Pin Lemo Power Cables. These we believe are Lemo to D-Tap. You will have to supply the appropriate video cables.