The Camplex 10-Ch OM3 Plenum Fiber LC Cable 100 ftfrom Camplex 10-Ch OM3 Plenum Fiber LC Cable 100 ftis a tight-buffered, indoor/outdoor plenum cable with LC connectors. It is built for spaces defined as "plenum," such as raised flooring systems and air handling ducts. It can be installed outside and in interior plenum/riser pathways. It's ideal for single termination configurations requiring multiple fibers.

A high strength-to-weight ratio and compact design allow tight bends and easy fit in limited conduit spaces. The main jacket is made out of UV-, water-, fungus-, and chemical-resistant materials and is suitable for installation in harsh industrial environments. The core is helically stranded for flexibility and survivability, and each fiber features a tight-buffered coating that provides mechanical protection. A 900 micron buffer on each fiber eliminates the need for fanout kits or pigtail splices because the connectors terminate directly to the fiber.

The cable complies with NFPA-262 and UL-910 standards, and is UL Listed in accordance with NEC section 770.179(a).

Indoor/Outdoor Plenum, LC Connectors    Tight-Buffered Coating On Each Fiber    High Strength-to-Weight Ratio    UV / Water / Fungus / Chemical Resistant    Suitable for Harsh Industrial Settings    Helically Stranded Core    900 Micron Buffer On Each Fiber    Complies with NFPA-262 & UL-910    UL Listed per NEC Section 770.179(a)

• Tight-buffered, indoor/outdoor plenum cable with LC connectors
• Designed for spaces defined as "plenum," such as air ducts
• Suitable for installation outside and interior plenum/riser pathways
• Ideal for single termination configurations requiring multiple fibers
• High strength-to-weight ratio
• UV-, water-, fungus-, and chemical-resistant main jacket
• Helically stranded core
• 900 micron buffer on each fiber
• Complies with NFPA-262 and UL-910 standards
• UL Listed in accordance with NEC section 770.179(a)

Related Questions and Answers

Q: 1. What is the height between the base of the tripod mount & the base plate for the camera mount?

A: Sirui PH-10 Carbon Fiber Gimbal Head has a adjustable vertical plate. Therefore you can adjust the height of the camera plate. The minimun distance between the the gimbal base mount on camera plate is 76mm. The maximun distance would be 133mm if you raise the plate.

Q: 2. Will the mid level spreader that came on my ENG CF-1 legs fit on this CF-2 set of legs?

A: The spreader model that supports the Sachtler CF-100ENG 2CF tripod in this kit is # 7007. Sachtler Mid-Level Spreader for Select 100/150mm Tripod Legs BH #SASP100OG • MFR #7007 https://bhpho.to/3E8MEfx

Q: 3. Will this work with GoPro 3+?

A: No, there is a different battery eliminator for the GoPro Hero 3+. Here are the different options: a href= http://www.bhphotovideo.com/c/search?Ntt=switronix+gopro+hero+3&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search= target= _blank http://www.bhphotovideo.com/c/search?Ntt=switronix+gopro+hero+3&N=0&InitialSearch=yes&sts=ma&Top+Nav-Search=/a

Q: 4. Can I use this with Sirui monopods ?

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head is compatible with Sirui monopods.

Q: 5. Does the PH-10 also fit the new Nikon Z 180-600mm? Not in terms of weight, but in terms of the lens axis being in the vertical p

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head will fit the Nikon Z 180-600mm without a problem.

Q: 6. On the Tripod- What is the minimum spread width of the back two tripod feet?

A: You can spread the feet as little as you'd like but the less you spread them the less stable the Sachtler Cine 7+7 FT MS flowtech 100 Tripod System will be.

Q: 7. What is the width of the Sirui PH-10's base?

A: Sirui PH-10 Carbon Fiber Gimbal Head base mount diameter is 50mm.

Q: 8. Did they fix the PH20's awful drag adjustment in pan axis, or does the PH10 have the same ratcheting effect at very slight drag?

A: As far as I am aware, both the PH10 and PH20 have the same pan lock mechanism. Neither are known to have adjustable pan drag; it is simply a pan locking knob with no adjustment to tension.

Q: 9. Will this gimbal work with my Canon R6, 100-500 lens & 1.4 converter on a Manfrotto tripod (MKBFRLA4BK-BH) with the 494 BH? Do I need to buy anything else?

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head can be used on a Manfrotto Befree Advanced Travel Aluminum Tripod to hold your Canon EOS R5 equipped with the RF 100-500mm and a 1.4X teleconverter.

Q: 10. For 8 thousand dollars does the tripod come with a camera?

A: No, but put your iPhone on it and you will become the next J.J. Abrams.