The Camplex 12-Ch OM3 Multimode Plenum Fiber LC Cable 100ftfrom Camplex 12-Ch OM3 Multimode Plenum Fiber LC Cable 100ftis a tight-buffered, indoor/outdoor plenum cable with LC connectors. It is built for spaces defined as "plenum," such as raised flooring systems and air handling ducts. It can be installed outside and in interior plenum/riser pathways. It's ideal for single termination configurations requiring multiple fibers.

A high strength-to-weight ratio and compact design allow tight bends and easy fit in limited conduit spaces. The main jacket is made out of UV-, water-, fungus-, and chemical-resistant materials and is suitable for installation in harsh industrial environments. The core is helically stranded for flexibility and survivability, and each fiber features a tight-buffered coating that provides mechanical protection. A 900 micron buffer on each fiber eliminates the need for fanout kits or pigtail splices because the connectors terminate directly to the fiber.

The cable complies with NFPA-262 and UL-910 standards, and is UL Listed in accordance with NEC section 770.179(a).

Indoor/Outdoor Plenum, LC Connectors    Tight-Buffered Coating On Each Fiber    High Strength-to-Weight Ratio    UV / Water / Fungus / Chemical Resistant    Suitable for Harsh Industrial Settings    Helically Stranded Core    900 Micron Buffer On Each Fiber    Complies with NFPA-262 & UL-910    UL Listed per NEC Section 770.179(a)

• Tight-buffered, indoor/outdoor plenum cable with LC connectors
• Designed for spaces defined as "plenum," such as air ducts
• Suitable for installation outside and interior plenum/riser pathways
• Ideal for single termination configurations requiring multiple fibers
• High strength-to-weight ratio
• UV-, water-, fungus-, and chemical-resistant main jacket
• Helically stranded core
• 900 micron buffer on each fiber
• Complies with NFPA-262 and UL-910 standards
• UL Listed in accordance with NEC section 770.179(a)

Related Questions and Answers

Q: 1. Will this cable work with the Slider One V3 and Sony A7s3 or A7IV?

A: Yes, the edelkrone S2 Shutter Release Cable will work with the Slider One, and both of your Sony camera models.

Q: 2. Will this cable work with the Sony RX100 vii?

A: Yes, this cable can be used with the RX100 vii.

Q: 3. I've read concerns that this cord has issues with certain data rates of 6k BRAW, is there info on what it generation of USB-C it is? Or what data rates it supports?

A: This cable supports 6K BRAW. Tilta does not provide any other specs on this cable. But they have confirmed that it does support 6K Braw recording.

Q: 4. Is there a compatible extension cable to work with the length of the slider pro long?

A: Yes, the edelkrone S2 Shutter Release Cable for Select Sony Cameras can be extended with the Syrp shutter link extension cable. Syrp Shutter Link Extension Cable (9.8') BH #SY00017014

Q: 5. Does this Cartoni Focus 12 Red Lock System come with handle and the mid spreder?

A: Yes, the Cartoni Focus 12 Red Lock System (100mm Ball) comes with a pan bar and the Smart Lock Mid-Level Spreader.

Q: 6. Do you sell spiked feet for this item?

A: The tripod includes a spiked base. All you will have to do is take off the rubber feet.

Q: 7. Is there an advantage to the Euro plate version vs the sidelock version? The Euro plate seems kind of small.

A: It is a matter of preference when choosing between a sideload or Euro-style plate. With a sideload plate, you have the benefit of sliding the camera forward and back to balance your camera on the head. With a Euro-style plate, the camera pops in and out with rapid speed and zero adjustments are to be made. There is a separate sliding plate underneath for balance. Euro-style plates tend to cost more than their standard tripod plate counterparts, but add stability and quickness.

Q: 8. What is the max height?

A: The following unit offers a max height of 162.00 cm 64 inches

Q: 9. Does this charge the 70D?

A: The Canon LC-E6 Charger for LP-E6 Battery Pack listed above may be used to charge the Canon LP-E6 Rechargeable Lithium-Ion Battery Pack (7.2V, 1800mAh) which is included with the Canon EOS 70D DSLR camera. While it does not charge the Canon EOS 70D itself (you would need an AC adapter to provide continuous power to the camera -- the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras, B&H # CAACKE6), the Canon LC-E6 Charger for LP-E6 Battery Pack is the correct charger that was originally included with the Canon EOS 70D DSLR camera.

Q: 10. Height of the tripod when closed?

A: The Closed length of the Cartoni Focus 12 Fluid Head with 2-Stage Aluminum Smart-Stop SDS Tripod System is 34.5" ( inches)