The Camplex 18-Ch OM3 Multimode Plenum Fiber LC Cable 100ftfrom Camplex 18-Ch OM3 Multimode Plenum Fiber LC Cable 100ftis a tight-buffered, indoor/outdoor plenum cable with LC connectors. It is built for spaces defined as "plenum," such as raised flooring systems and air handling ducts. It can be installed outside and in interior plenum/riser pathways. It's ideal for single termination configurations requiring multiple fibers.

A high strength-to-weight ratio and compact design allow tight bends and easy fit in limited conduit spaces. The main jacket is made out of UV-, water-, fungus-, and chemical-resistant materials and is suitable for installation in harsh industrial environments. The core is helically stranded for flexibility and survivability, and each fiber features a tight-buffered coating that provides mechanical protection. A 900 micron buffer on each fiber eliminates the need for fanout kits or pigtail splices because the connectors terminate directly to the fiber.

The cable complies with NFPA-262 and UL-910 standards, and is UL Listed in accordance with NEC section 770.179(a).

Indoor/Outdoor Plenum, LC Connectors    Tight-Buffered Coating On Each Fiber    High Strength-to-Weight Ratio    UV / Water / Fungus / Chemical Resistant    Suitable for Harsh Industrial Settings    Helically Stranded Core    900 Micron Buffer On Each Fiber    Complies with NFPA-262 & UL-910    UL Listed per NEC Section 770.179(a)

• Tight-buffered, indoor/outdoor plenum cable with LC connectors
• Designed for spaces defined as "plenum," such as air ducts
• Suitable for installation outside and interior plenum/riser pathways
• Ideal for single termination configurations requiring multiple fibers
• High strength-to-weight ratio
• UV-, water-, fungus-, and chemical-resistant main jacket
• Helically stranded core
• 900 micron buffer on each fiber
• Complies with NFPA-262 and UL-910 standards
• UL Listed in accordance with NEC section 770.179(a)

Related Questions and Answers

Q: 1. Can this be used on other Olympus lens with 46mm filter thread?

A: It fits well on my Olympus 12mm f2 lens as well as the 17mm f1.8. Have not tried it on other lenses.

Q: 2. Will this work with Sennheiser wireless receiver ew100 g3?

A: Yes, this will with Sennheiser EW series receivers.

Q: 3. is there a benefit to this cable over this one? ikan Stratus Lens Control Y-Cable for Canon Cinema CN-E Servo Lenses BH #IKSTRCNEY MFR #STR-CN-E-Y. https://bhpho.to/3nyVKKf

A: they essentially do the exact same thing. Zacuto is known for making premium accessories for camera gear therefore they cost more than Ikan which is typically known as a budget friendly brand. I cant say that one has an advantage over the other because this is a situation where the cable either works or it doesn't work. There is no wrong answer here both products are reliable.

Q: 4. are the light output specs (fc/lux) without the diffuser/soft box? any specs WITH the soft box?

A: The photometrics for Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Two-Mat Kit were mesured without the softbox. The softbox comes with a diffusion of 1/2 stop and additional option for 1 stop.

Q: 5. I assume this will also charge the larger SSL-JVC75 battery?

A: Yes it will. This will charger B&H # JVSSLJVC75 as well.

Q: 6. Will this work with canon 70-200mm zoom lens?

A: The Canon 70-200 does not have a remote input to accept the Zacuto Zoom and Focus Control Y Cable.

Q: 7. Does this kit come with screws needed to mount the support to the lens?

A: Yes, this kit should come with everything you need to attach it to your lens.

Q: 8. Does this charge the 70D?

A: The Canon LC-E6 Charger for LP-E6 Battery Pack listed above may be used to charge the Canon LP-E6 Rechargeable Lithium-Ion Battery Pack (7.2V, 1800mAh) which is included with the Canon EOS 70D DSLR camera. While it does not charge the Canon EOS 70D itself (you would need an AC adapter to provide continuous power to the camera -- the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras, B&H # CAACKE6), the Canon LC-E6 Charger for LP-E6 Battery Pack is the correct charger that was originally included with the Canon EOS 70D DSLR camera.

Q: 9. How can we adopt this to Artnet / WiFi?

A: You may purchase an option such as the Blizzard SoC-It Wi-Fi Wireless DMX Gateway Control Solution, B&H # BLSOCIT, and a DMX cable to add Wi-Fi and Artnet compatibility to the Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Two-Mat Kit (V-Mount).

Q: 10. Will this Zacuto cable for the ZSG-C10 Zoom Grip allow control of the start stop on the Sony FS7?

A: Unfortunately not. This cable has no where to go on the Sony FS7. You can mount the lens with a smart EF to E mount adapter and power the zoom. But sorry, no record start and stop.