The Camplex 6-Ch OM3 Multimode Plenum Fiber LC Cable 100ftfrom Camplex 6-Ch OM3 Multimode Plenum Fiber LC Cable 100ftis a tight-buffered, indoor/outdoor plenum cable with LC connectors. It is built for spaces defined as "plenum," such as raised flooring systems and air handling ducts. It can be installed outside and in interior plenum/riser pathways. It's ideal for single termination configurations requiring multiple fibers.

A high strength-to-weight ratio and compact design allow tight bends and easy fit in limited conduit spaces. The main jacket is made out of UV-, water-, fungus-, and chemical-resistant materials and is suitable for installation in harsh industrial environments. The core is helically stranded for flexibility and survivability, and each fiber features a tight-buffered coating that provides mechanical protection. A 900 micron buffer on each fiber eliminates the need for fanout kits or pigtail splices because the connectors terminate directly to the fiber.

The cable complies with NFPA-262 and UL-910 standards, and is UL Listed in accordance with NEC section 770.179(a).

Indoor/Outdoor Plenum, LC Connectors    Tight-Buffered Coating On Each Fiber    High Strength-to-Weight Ratio    UV / Water / Fungus / Chemical Resistant    Suitable for Harsh Industrial Settings    Helically Stranded Core    900 Micron Buffer On Each Fiber    Complies with NFPA-262 & UL-910    UL Listed per NEC Section 770.179(a)

• Tight-buffered, indoor/outdoor plenum cable with LC connectors
• Designed for spaces defined as "plenum," such as air ducts
• Suitable for installation outside and interior plenum/riser pathways
• Ideal for single termination configurations requiring multiple fibers
• High strength-to-weight ratio
• UV-, water-, fungus-, and chemical-resistant main jacket
• Helically stranded core
• 900 micron buffer on each fiber
• Complies with NFPA-262 and UL-910 standards
• UL Listed in accordance with NEC section 770.179(a)

Related Questions and Answers

Q: 1. How long is head cable that comes with the LiteCloth?

A: The head cable on the Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Mat Kit (V-Mount) is ten feet.

Q: 2. Does this charge the 70D?

A: The Canon LC-E6 Charger for LP-E6 Battery Pack listed above may be used to charge the Canon LP-E6 Rechargeable Lithium-Ion Battery Pack (7.2V, 1800mAh) which is included with the Canon EOS 70D DSLR camera. While it does not charge the Canon EOS 70D itself (you would need an AC adapter to provide continuous power to the camera -- the Canon ACK-E6 AC Adapter Kit for Select Canon Cameras, B&H # CAACKE6), the Canon LC-E6 Charger for LP-E6 Battery Pack is the correct charger that was originally included with the Canon EOS 70D DSLR camera.

Q: 3. How can we adopt this to Artnet / WiFi?

A: You may purchase an option such as the Blizzard SoC-It Wi-Fi Wireless DMX Gateway Control Solution, B&H # BLSOCIT, and a DMX cable to add Wi-Fi and Artnet compatibility to the Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Two-Mat Kit (V-Mount).

Q: 4. Does this lens cover fit over the metal lens hood or it only fits over the lens with the lens hood taken off?

A: No the LC-61 will not fit over the metal lens hood for the M.Zuiko ED 75mm f1.8 lens. When using this cap the hood needs to be removed from the lens

Q: 5. Hi My lens is Olympus M.Zuiko 14-150mm 1:4-5.6 II ED MSC, will this fit my lens?

A: Yes this cap will fit your lens.

Q: 6. Light weight with softbox diffuser and grid? And best Stand for holding light with v mount battery?

A: 4.1 lbs for the mat, diffuser, softbox and grid. 1.5 lb more for the controller. Impact makes a good stand. https://bhpho.to/2mj1x9k

Q: 7. are the light output specs (fc/lux) without the diffuser/soft box? any specs WITH the soft box?

A: The photometrics for Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Two-Mat Kit were mesured without the softbox. The softbox comes with a diffusion of 1/2 stop and additional option for 1 stop.

Q: 8. Can this be used on other Olympus lens with 46mm filter thread?

A: It fits well on my Olympus 12mm f2 lens as well as the 17mm f1.8. Have not tried it on other lenses.

Q: 9. What is the weight of the package sans the case? I plan on creating a custom case arrangement if the weight is correct.

A: The Intellytech LiteCloth 2.0 LC-160RGBWW Foldable 2 x 2 LED Mat weights 3lbs.

Q: 10. Is this Nikon LC-K104 Front Lens Cap compatible with the Nikon AF-S 120-300mm f/2.8E FL ED SR lens?

A: No, the Nikon LC-K104 Front Lens Cap is not compatible with the Nikon AF-S 120-300mm f/2.8E FL ED SR VR Lens.