The Camplex 8-Ch OM3 Plenum Fiber LC Cable 100 ftfrom Camplex 8-Ch OM3 Plenum Fiber LC Cable 100 ftis a tight-buffered, indoor/outdoor plenum cable with LC connectors. It is built for spaces defined as "plenum," such as raised flooring systems and air handling ducts. It can be installed outside and in interior plenum/riser pathways. It's ideal for single termination configurations requiring multiple fibers.

A high strength-to-weight ratio and compact design allow tight bends and easy fit in limited conduit spaces. The main jacket is made out of UV-, water-, fungus-, and chemical-resistant materials and is suitable for installation in harsh industrial environments. The core is helically stranded for flexibility and survivability, and each fiber features a tight-buffered coating that provides mechanical protection. A 900 micron buffer on each fiber eliminates the need for fanout kits or pigtail splices because the connectors terminate directly to the fiber.

The cable complies with NFPA-262 and UL-910 standards, and is UL Listed in accordance with NEC section 770.179(a).

Indoor/Outdoor Plenum, LC Connectors    Tight-Buffered Coating On Each Fiber    High Strength-to-Weight Ratio    UV / Water / Fungus / Chemical Resistant    Suitable for Harsh Industrial Settings    Helically Stranded Core    900 Micron Buffer On Each Fiber    Complies with NFPA-262 & UL-910    UL Listed per NEC Section 770.179(a)

• Tight-buffered, indoor/outdoor plenum cable with LC connectors
• Designed for spaces defined as "plenum," such as air ducts
• Suitable for installation outside and interior plenum/riser pathways
• Ideal for single termination configurations requiring multiple fibers
• High strength-to-weight ratio
• UV-, water-, fungus-, and chemical-resistant main jacket
• Helically stranded core
• 900 micron buffer on each fiber
• Complies with NFPA-262 and UL-910 standards
• UL Listed in accordance with NEC section 770.179(a)

Related Questions and Answers

Q: 1. For 8 thousand dollars does the tripod come with a camera?

A: No, but put your iPhone on it and you will become the next J.J. Abrams.

Q: 2. Can this be used for a Pentax 6x7?

A: Yes, the following item is a standard threaded for pneumatic bulb/cable releases.

Q: 3. Will this work on the Minolta XG-9?

A: Yes, the Vello TSR-40 Threaded Shutter Release Cable (15.75") is compatible with the Minolta XG-9 camera.

Q: 4. This lacks a timecode or genlock input, but can it perform an equivalent sync function through its Ethernet control?

A: The FUJIFILM FT-XH is a file transmitting solution and would not add Genlock or Sync to the Fuji X-H2S. *FTP transfer by wired LAN / wireless LAN / USB Smartphone tethering *Tethered shooting by wired LAN / wireless LAN *Remote recording by wired LAN / wireless LAN; Capable of controlling up to 4 X-H2S cameras from a browser at the same time

Q: 5. Does the Fujifilm FT-XH come with two batteries or do they need to be purchased separately?

A: Although the Fujifilm FT-XH File Transmitter Grip can hold 2 NP-W235 Batteries, they are not included. The FUJIFILM NP-W235 Lithium-Ion Battery (7.2V, 2200mAh), BH # FUNPW235 can be found here: https://bhpho.to/2HYZe2M

Q: 6. Will the mid level spreader that came on my ENG CF-1 legs fit on this CF-2 set of legs?

A: The spreader model that supports the Sachtler CF-100ENG 2CF tripod in this kit is # 7007. Sachtler Mid-Level Spreader for Select 100/150mm Tripod Legs BH #SASP100OG • MFR #7007 https://bhpho.to/3E8MEfx

Q: 7. How works doing tethering with Capture One or Lightroom sending RAW files?

A: Tethered support with the FUJIFILM FT-XH File Transmitter Grip is going to be limited. Adobe Lightroom does not support tethered shooting with any Fujifilm cameras, only immediate import once shot. Capture One Pro 22 does not currently support wireless tethering with any Fujifilm cameras, it would be only wired support.

Q: 8. On the Tripod- What is the minimum spread width of the back two tripod feet?

A: You can spread the feet as little as you'd like but the less you spread them the less stable the Sachtler Cine 7+7 FT MS flowtech 100 Tripod System will be.

Q: 9. Will this release cable work with a Minolta Autocord?

A: Yes, the Vello TSR-40 Threaded Shutter Release Cable (15.75") should be able to screw into the threads in the center of your cameras shutter release button for triggering your camera's shutter using a cable release.

Q: 10. Will this tripod support an Arri Alexa EV fully rigged? I understand that it depends on my rig but I would like to know if this tripod would be recommendable

A: Technically yes, it will support up to 42 lbs.Your problem will be properly balancing the camera, especially if you are using zoom lenses. I feel this head is undersized for an Alexa ev. Even with a mini, I'd go with beefier head. I use my 18 with a C300 mkii and canon lenses. I always go beefier when shooting with Arri cameras. In the long run you don't save money if the head underperforms. My 2.