Advanced Combat Optical Gunsight, the Trijicon 4x32 ACOG Riflescope with TA51 Mountfrom Trijicon, combines a waterproof and shock-resistant construction with a battery-free dual-illuminated Green Chevron reticle. The reticle employs tritium phosphor for illumination at night and fiber optic illumination for daytime. The sight's rugged optical system features zero distortion, multiple anti-reflection coatings, and a 32mm objective aperture. To compensate for wind and ballistic bullet drop, the scope offers windage and elevation adjustments with 1/2 MOA impact point correction.

The housing offers supreme ruggedness and durability: it withstands heavy recoil and deep-water submersion to 328'. To achieve this benchmark, the body is forged from a single piece of 7075-T6 aluminum alloy and coated with Type III hard anodizing finish. It also features an angled sunshade and mounts on a Picatinny style rail via the included TA51 Flattop Mount.

Green Chevron  Reticle    Dual-Illuminated: Tritium & Fiber Optic    32mm Objective Lens Diameter    Multicoated Zero-Distortion Optics    Windage and Elevation, 1/2 MOA IPC    7075-T6 Aluminum, Type III Hard Anodized    Waterproof/Submersible to 328'    Recoil-Resistant, Fogproof    Made in the USA

• Multicoated optics
• 4x magnification for a short-to-medium range
• 32mm Objective lens diameter
• Angular field of view range is 7°
• Eye relief: 1.5"
  • Green Chevron  reticle
  • Tritium phosphor lamp for night illumination
  • Fiber optic illumination for daylight
  • BDC out to 800 m
    • Windage and elevation adjustments
    • 1/2 MOA impact point adjustments
      • Angled sunshade
      • Single piece 7075-T6 aluminum alloy housing
      • Type III hard anodizing black matte finish
      • TA51 Flattop Mount is compatible with Picatinny rails
      • Waterproof submersible to 328'
      • Shock-resistant

        Related Questions and Answers

        Q: 1. Does this used adapter comes with the removable tripod foot?

        A: FUJIFILM H Mount Adapter G comes with a detachable tripod collard. For B&H Used department. Please contact the department directly.

        Q: 2. What is the measurement between the back and the lip that retains the phone? In other words, how think can the phone me, for example if it is in a case.

        A: Smartphone Tripod Mounts are usually meant to Grip the Phone itself. If you are using a Thin Case then it should support both phone and case. Unfortunately these will not grip to a Thicker Case like an Otterbox.

        Q: 3. Will this fit nicely with a Small HD 702 touch?

        A: Yes, the AtomX Monitor Mount is compatible with the SmallHD 702 Touch.

        Q: 4. How badly does the umbrella shaft interfere with the thumbscrews?

        A: I have never found that to be a problem...

        Q: 5. Does the Epson Fluid Mount accessory require a special liquid? If so, where can it be obtained?

        A: Yes it does and there are two suppliers of slightly different solutions.Lumina is supplied by a Canadian company called ScanScience.The other is supplied by Aztec scanners but I do not know its name.Best of luck,Fred

        Q: 6. I have a Nikon Z6 and I'm looking for a smartphone mount that could fit on my camera? Thank you!

        A: If your smartphone is up to up to 3.25" in width, then yes, the SHILL Smartphone Mount may be used with your smartphone. However, if you wish to connect your smartphone to the hot shoe on the top of your Nikon Z6 Mirrorless Digital Camera, you would also need an adapter such as the Revo Hot Shoe to 1/4"-20 Male Post Adapter, B&H # RESACS14M, for your usage needs.

        Q: 7. Is there any difference in this and getting an adapter to SSD from Cfexpress?

        A: We can only say that the DJI model would be supported when using the Ronin 4D. Other adapters may not be compatible with the camera.

        Q: 8. What is the weight of this mount?

        A: The following unit comes in at 113 Grams, 0.249122 lbs

        Q: 9. how much weight can this handle?

        A: A 4-foot umbrella.

        Q: 10. Will this work with the H Mount HTS 1,5 Tilt Shift Adapter?

        A: While it has not been tested or stated by the manufacturer, the FUJIFILM H Mount Adapter G should accommodate the Hasselblad HTS 1.5 Tilt & Shift Adapter for H-Series Digital Cameras (B&H # 2677023).