Advanced Combat Optical Gunsight, the Trijicon 4x32 ACOG Riflescope with TA51 Mountfrom Trijicon, combines a waterproof and shock-resistant construction with a battery-free dual-illuminated Green Horseshoe reticle. The reticle employs tritium phosphor for illumination at night and fiber optic illumination for daytime. The sight's rugged optical system features zero distortion, multiple anti-reflection coatings, and a 32mm objective aperture. To compensate for wind and ballistic bullet drop, the scope offers windage and elevation adjustments with 1/2 MOA impact point correction.

The housing offers supreme ruggedness and durability: it withstands heavy recoil and deep-water submersion to 328'. To achieve this benchmark, the body is forged from a single piece of 7075-T6 aluminum alloy and coated with Type III hard anodizing finish. It also features an angled sunshade and mounts on a Picatinny style rail via the included TA51 Flattop Mount.

 Green Horseshoe/Dot Reticle    Dual-Illuminated: Tritium & Fiber Optic    32mm Objective Lens Diameter    Multicoated Zero-Distortion Optics    Windage and Elevation, 1/2 MOA IPC    7075-T6 Aluminum, Type III Hard Anodized    Waterproof/Submersible to 328'    Recoil-Resistant, Fogproof    Made in the USA

• Multicoated optics
• 4x magnification for a short-to-medium range
• 32mm Objective lens diameter
• Angular field of view range is 7°
• Eye relief: 1.5"
  •  Green Horseshoe/Dot reticle
  • Tritium phosphor lamp for night illumination
  • Fiber optic illumination for daylight
  • BDC out to 800 m
    • Windage and elevation adjustments
    • 1/2 MOA impact point adjustments
      • Angled sunshade
      • Single piece 7075-T6 aluminum alloy housing
      • Type III hard anodizing black matte finish
      • TA51 Flattop Mount is compatible with Picatinny rails
      • Waterproof submersible to 328'
      • Shock-resistant

        Related Questions and Answers

        Q: 1. Is there any difference in this and getting an adapter to SSD from Cfexpress?

        A: We can only say that the DJI model would be supported when using the Ronin 4D. Other adapters may not be compatible with the camera.

        Q: 2. this product suitable fir canon R6 ?

        A: Yes, the Atomos AtomX 5 and 7" Monitor Mount will fit in the shoe mount on the camera.

        Q: 3. How do I connect this to a 1.25mm barrel?

        A: It depends on the 1.25 eyepiece for a telescope. But most use a T mount and that is what the Vivitar T-Mount to Nikon Z-Mount Adapter has on one end. And the other size is for a Nikon Z mount camera.

        Q: 4. Is anyone familiar with the older Epson 4490 model scanner? Do you think this mount could work with that?

        A: The scanner this was made for has mounting holes to secure and line it to the bed, if the holes line up it may work, focus may be a problem, good luck!

        Q: 5. Will this fit nicely with a Small HD 702 touch?

        A: Yes, the AtomX Monitor Mount is compatible with the SmallHD 702 Touch.

        Q: 6. I took digital caliper measurements of the base on my gopro 3-prong mount and it is 0.98 inches around. Is this significantly smaller?

        A: The JOBY Pin Joint Mount has a base measurement of 0.91in.

        Q: 7. Can I sync my orange dot H lens to 1/2000th of a second with this adapter as I do with my Hasselblad X1D?

        A: Unfortunately we are unable to test. It is our opinion that you should be able to do what you wish.

        Q: 8. Can the height be adjusted slightly on this to account for the tolerance in the scanner focus range between different v850 scanners?

        A: No, this cannot be adjusted.

        Q: 9. How do you get it to 360 pan? I know how to make it tilt. But I can't get it to Pan 360 once attached to my top handle.

        A: Once you attach and secure the Atomos AtomX Monitor Mount to a cold/hot shoe, you will be able to easily rotate the mount. There is also a screw in the middle of the mount once you tilt the mount all the way to adjust the pan tension.

        Q: 10. What is the diameter of the rod itself? Thinner than the Auray? Will it work with the Avenger D200 2.5” grip?

        A: While the diameter of the rod is not specified, this holder should be compatible with the Avenger D200 grip.