Advanced Combat Optical Gunsight, the Trijicon 4x32 ACOG Riflescope with TA51 Mountfrom Trijicon, combines a waterproof and shock-resistant construction with a battery-free dual-illuminated Green Horseshoe reticle. The reticle employs tritium phosphor for illumination at night and fiber optic illumination for daytime. The sight's rugged optical system features zero distortion, multiple anti-reflection coatings, and a 32mm objective aperture. To compensate for wind and ballistic bullet drop, the scope offers windage and elevation adjustments with 1/2 MOA impact point correction.

The housing offers supreme ruggedness and durability: it withstands heavy recoil and deep-water submersion to 328'. To achieve this benchmark, the body is forged from a single piece of 7075-T6 aluminum alloy and coated with Type III hard anodizing finish. It also features an angled sunshade and mounts on a Picatinny style rail via the included TA51 Flattop Mount.

Green  Horseshoe/Dot Reticle    Dual-Illuminated: Tritium & Fiber Optic    32mm Objective Lens Diameter    Multicoated Zero-Distortion Optics    Windage and Elevation, 1/2 MOA IPC    7075-T6 Aluminum, Type III Hard Anodized    Waterproof/Submersible to 328'    Recoil-Resistant, Fogproof    Made in the USA

• Multicoated optics
• 4x magnification for a short-to-medium range
• 32mm Objective lens diameter
• Angular field of view range is 7°
• Eye relief: 1.5"
  • Green  Horseshoe/Dot reticle
  • Tritium phosphor lamp for night illumination
  • Fiber optic illumination for daylight
  • BDC out to 800 m
    • Windage and elevation adjustments
    • 1/2 MOA impact point adjustments
      • Angled sunshade
      • Single piece 7075-T6 aluminum alloy housing
      • Type III hard anodizing black matte finish
      • TA51 Flattop Mount is compatible with Picatinny rails
      • Waterproof submersible to 328'
      • Shock-resistant

        Related Questions and Answers

        Q: 1. I have a Nikon Z6 and I'm looking for a smartphone mount that could fit on my camera? Thank you!

        A: If your smartphone is up to up to 3.25" in width, then yes, the SHILL Smartphone Mount may be used with your smartphone. However, if you wish to connect your smartphone to the hot shoe on the top of your Nikon Z6 Mirrorless Digital Camera, you would also need an adapter such as the Revo Hot Shoe to 1/4"-20 Male Post Adapter, B&H # RESACS14M, for your usage needs.

        Q: 2. Does the Epson Fluid Mount accessory require a special liquid? If so, where can it be obtained?

        A: Yes it does and there are two suppliers of slightly different solutions.Lumina is supplied by a Canadian company called ScanScience.The other is supplied by Aztec scanners but I do not know its name.Best of luck,Fred

        Q: 3. I took digital caliper measurements of the base on my gopro 3-prong mount and it is 0.98 inches around. Is this significantly smaller?

        A: The JOBY Pin Joint Mount has a base measurement of 0.91in.

        Q: 4. Will this work with the H Mount HTS 1,5 Tilt Shift Adapter?

        A: While it has not been tested or stated by the manufacturer, the FUJIFILM H Mount Adapter G should accommodate the Hasselblad HTS 1.5 Tilt & Shift Adapter for H-Series Digital Cameras (B&H # 2677023).

        Q: 5. Can I sync my orange dot H lens to 1/2000th of a second with this adapter as I do with my Hasselblad X1D?

        A: Unfortunately we are unable to test. It is our opinion that you should be able to do what you wish.

        Q: 6. Is there any difference in this and getting an adapter to SSD from Cfexpress?

        A: We can only say that the DJI model would be supported when using the Ronin 4D. Other adapters may not be compatible with the camera.

        Q: 7. Night Owl iGen 20/20 product to a telescope? Can you also recommend the T-ring if it is additionally required? Many Thanks, Levent

        A: The Novagrade T-Mount Adapter is for use with an interchangeable lens camera. It would not work with a night vision optic.

        Q: 8. How badly does the umbrella shaft interfere with the thumbscrews?

        A: I have never found that to be a problem...

        Q: 9. Is anyone familiar with the older Epson 4490 model scanner? Do you think this mount could work with that?

        A: The scanner this was made for has mounting holes to secure and line it to the bed, if the holes line up it may work, focus may be a problem, good luck!

        Q: 10. How do you get it to 360 pan? I know how to make it tilt. But I can't get it to Pan 360 once attached to my top handle.

        A: Once you attach and secure the Atomos AtomX Monitor Mount to a cold/hot shoe, you will be able to easily rotate the mount. There is also a screw in the middle of the mount once you tilt the mount all the way to adjust the pan tension.