The IK Multimedia T-Racks British Channel Strip - Downloadis a software emulation of a classic large format analog console channel strip from British consoles from the 1980's. It is designed to model the matched gain staging and section switching of the classic forward sounding hardware. It is suitable for a wide range of sources such as kick, toms, snare, over heads, guitars, bass, etc.

The software version expands upon the original hardware by adding dual-mode operation with switchable Black and Brown circuit designs from the two variations of the original hardware. This provides a wider range of dynamic and tone shaping possibilities.

The low shelf filter knob will change color depending upon which circuit design is selected. The low shelf filter features a selectable frequency knob between 50 and 400 Hz, a gain level between -15 to +15 dB, and a peak button. The LOW MID and HI MID EQ sections feature gain control knobs from -15 to +15 dB, knobs for adjusting the Q, and frequency control knobs for 0.2 to 2.0 kHz for the LOW MID and between 0.6 and 7 kHz for the HI MID. The HI EQ section features a peak button, a gain control knob from -15 to +15 dB, and a frequency control knob from 1.5 to 13 kHz.

The side chain high pass filter section features a filter in button, a filter side chain button and selectable knob from out to 400 Hz, and a filter in button with a selectable knob from 3 kHz to out.

The Gate/Expander section features adjustable threshold from -30 to +10 dB, a release time from 0.1 to 4 seconds, and a range knob from 0 to 40, as well as buttons for engaging EQ S/C, EQ PRE, EXP, and Fast Attack. The compressor section features button for fast attack and hard compression, as well as knobs for adjusting the release from 0.1 to 4 seconds, the threshold from +10 to -20 dB, and a ratio from 1 to ∞.

The final section features an adjustable input gain from -15 to +15 dB, an adjustable output gain from -15 to +15 dB, a six section stereo LED meter, and a button for turning the channel strip on and off. The EQ and Gate/Expander-Compressor sections can be operated in either order by using the "IN" and "B" buttons to achieve a wide range of dynamic processing, such as EQing the signal before compression, or compressing the signal and then EQing the result. The gate section is useful for keeping the dynamics of a track within range, for taming excessive peaks, or removing background noises below the defined threshold.

A compression IN button allows you to observe the effect of the process on the signal. The left and right sides can be linked for stereo compression. A mid side button enables mid-side compression wherein the mid channel is the mono sum of the sound stage and the side channel is the difference between the left and right channels. A reset switch can be used to restore the original settings.

The plug-in is fully compatible with native 32- and 64-bit applications on both Mac OS X (Universal Binary) and Windows (XP/Vista/7/8) computers. It supports VST, RTAS, AAX, and Audio Units plug-in formats. It can also be used with the T-RackS CS standalone application (sold separately).

Based on Classic British Console Strip    Side Chain High Pass Filter    Change Order of EQ and Dynamics    Adjustable Ratio, Attack, and Release    Mid Side Compression    Supports 192 kHz Sample Rates    Full-Latency Compensation Support    32- and 64-bit Native Compatibility    Reset Switch    Mac and Windows Compatibility

Related Questions and Answers

Q: 1. I'd like to do a Facebook Livestream from my phone using this for better sound, would my iPhone automatically switch to this input?

A: While yes, Facebook would use the audio connected to the iRig for a live stream, please note that Facebook will only recognize the left input's audio since the app is in mono. For stereo connection to Facebook, you'd want to use a laptop or pc.

Q: 2. I bought an iRig Pro Duo, but there is no input port that works with a standard USB Midi output. I have the Arturia MK2 Minilab that has only the standard USB cable output. How would I connect the standard Type B (I bought an iRig Pro Duo, but there is no input port that works with a standard USB Midi output. I have the Arturia MK2 Minilab that has only the standard USB cable output. How would I connect the standard Type B (D shape) USB Midi output port to the iRig pro duo?

A: The Arturia MiniLab MK2 is bus powered and connects directly to a computer or to an iOS or Android device without the need for an interface. It will not connect with the iRig Pro Duo but it is not needed to connect with a computer or mobile device. The MiniLab is just a MIDI controller that sends data triggered by pressing the keys, but it does not have any built-in instrument sounds. The software included with the MiniLab (or other similar DAW software) enables the MiniLab to create instrument sounds when you are connected to a computer or device that has the DAW software installed. Please feel free to contact us by phone or through live chat if you have additional questions or need further assistance.

Q: 3. Will this work on a MacBook? I’m going to use it for a podcast.

A: The iRig Pre was designed for use with mobile devices like iPhones and iPads rather than a MacBook. You will have better results using a USB interface with a MacBook. If you are using a mic with XLR output, you can use the Polsen XLR-USB-48 XLR to USB Audio Interface (B&H# POXLRUSB48) which can also supply phantom power. The Behringer U-PHORIA UM2 Desktop 2x2 USB 1.1 Audio Interface (B&H# BEUM2) is another lower-priced option. If you want an interface that will work with your MacBook as well as with mobile devices, the IK Multimedia iRig Pre HD Audio Interface with Mic Pre (B&H# IKIRIGPREHD) or Zoom U-22 Ultracompact 2x2 USB Handy Audio Interface (B&H# ZOZU22) are good options. Please feel free to contact us by phone or through live chat if you would like further assistance.

Q: 4. Will this device be recognized by the Cisco WebEx Meetings app on iOS?

A: iRig Pro Duo I/O will work with any software which allows external audio input from digital devices. The Cisco WebEx Meetings app team should be able to let you know if this will work.

Q: 5. Is this cable compatible with Evermix MixBox2 or EvermixBox4?

A: This cable is designed for IK Multimedia products and cannot be guaranteed to work with third party products.

Q: 6. I want to use this to mount a light. Same L x W dimensions but a little thicker than a tablet. What is the max thickness of tablet/light/etc that this is able to accommodate?

A: The IK Multimedia iKlip Xpand Universal Mic Stand Mount for Tablets BH #IKXMAMSM712 does not have a specification for thickness from the manufacturer. Since it is designed for tablets, the thickness will not be very much. If your device exceeds .23'', it will most likely not fit properly.

Q: 7. Does iRig Pro Duo work with 8th Generation iPad (2020)?

A: Yes, the IK Multimedia iRig Pro Duo I/O 2-Channel Audio/MIDI Interface for Mobile Devices and Computers will work with and provides a cable for connection to the iPad 8th generation Lightning connector.

Q: 8. How does it mount on a dashboard of a car?

A: If your dashboard doesn't have a microphone stand, it's probably not going to mount on your dashboard.

Q: 9. will this interface with a stand with a male 1/4-20 top?

A: The iKlip 3 Video includes a UNC 1/4"-20 male to 5/8"-27 female thread adapter.

Q: 10. I have iphone se. I want to connect Galaxy GT-V wireless and connect the headphone jack from irig pre to mixer. Will this work and what xlr to 1/8 adapter will I need for the iring pre? Thank you

A: This could work. Use this cable. A headphone into a LINE input may a bit "hot".