You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Gra-vue Xio 9030hdemb 4-channel Audio Embedder Frame Sync

Gra-vue Xio 9030hdemb 4-channel Audio Embedder Frame Sync
  • Product Code: eq175738
  • Availability: In Stock

$6,359.85 $8,967.39

The Gra-Vue XIO 9030HDEMB 4-Channel Audio Embedder Frame Syncis for use in an XIO series rackmount frame, and will embed two stereo analog audio sources into a single SDI stream. It features two mirrored SDI outputs so that video with newly embedded audio may be delivered to two destinations without requiring a separate distribution amplifier. The SDI audio group and channels to which the audio is embedded to is user-defined, and may be set using DIP switches on the unit. The embedder supports 625i50, 525i60, 720p, 1080i, 1080p, and 1080psf signals and features automatic input detection.

Note: This version is configured for the 1RU frame. There is another model available if you use the 3RU frame.

Embeds Two Stereo Pairs to SDI    Supports SD and HD-SDI up to 1080p    Dual Mirrored SDI Outputs    Frame Sync with Reference Input    For XIO Series Rackmount Frames    Configured for 1RU Frame

Parameters
SDI InputConnector: 1 x HD/SD-SDI on BNC female
Impedance: 75 ohm
Maximum Cable LengthUp to < 328' (100 m) when using Belden 1694A
Reference InputConnector: Analog composite video on BNC female
Supported Standards: NTSC, PAL
Analog Audio InputConnector: 4 x Balanced 3-pin terminal block
Maximum Level: +24 dBu (0 dBFs)
SDI Output2 x HD/SD-SDI on BNC female
Impedance: 75 ohm
Level: 800 mV ±5%
Supported FormatsSD: 625i50, 525i60
HD: 1080i50/60, 720p50/60, 1080p24/25/30, 1080psf24
Supported StandardsSMPTE 259M-C (270 Mb/s), SMPTE 292M (1.485 Gb/s)
Status IndicatorSignal status indicator, Power indicator (indicated by illuminating or muting a green LED)

Reference input with support for the following sync modes: INT, single EXT, and Global EXT

Automatic signal detection. Supported signals include: 625i50, 525i60, 720p, 1080i, 1080p, and 1080psf

Audio group to embed to may be selected via DIP switches

Provides automatic signal equalization to enable cable runs up to 328' when using Belden 1694A cable

Supports hot swapping of connectors

Provides LED lights to indicate the status of signals and power supply

Supports SNMP, and can be managed and monitored in real-time using XIO NET via an Ethernet interface

For use in broadcast television and other professional video applications

Related Questions and Answers

Q: 1. Speaker resistance, ohm requirements.

A: Technical Pro does not provide that information. According to their site, the peak power is 1500 watts.

Q: 2. Can you replace the bulb easily if it burns out?

A: Yes it is easy to change the bulb

Q: 3. Does it take 2 x 2 slides ?

A: I use it for viewing 35mm mounted slides, which measure 2 x2 . Side of box reads: Full coverage, big picture viewing of 35mm, and all other 2x2in (5x5cm) mounted slides.

Q: 4. Are Preamp outputs volume controlled with the master volume control as well as the PreOut level control knob?

A: Preamp controls each channel individually, and the master controls the summed signals.

Q: 5. How does one change the batteries?

A: At back of unit press both sides simultaneously and pull back. Unit housing batteries and bulb will slide out.

Q: 6. How many slides fit in at once? Hoping not to change one at a time.

A: It's a single slide viewerthat's the whole point. If you want to view multiple slides at once, get a slide projector.

Q: 7. Whats the meaning of surround output?and what is rec an line output used for?

A: The surround output on this amplifier sends power to a left, right, and center channel speaker. Record and line outputs are to bypass the amplifier and only send out signal.

Q: 8. Will this work from a Leica Rangemaster CRF 2800.com to a Google Pixel 2?

A: The Tele Vue FoneMate Universal Digiscoping Adapter will fit your Google Pixel 2 phone but it has not been tested on a range finder.

Q: 9. The slides I have are quite old - circa 1960.. Each slide has been encased in metal. Will the slide go into the viewer as is?

A: Yes - I found some old slides my father had that are in an Airequipt Slide Changer holder each slide is in a metal frame. Each individual slide will fit in my Kaiser diascop mini 3 but only horizontally

Q: 10. Will this unit play .wav files from the USB stick?

A: Yes, the Technical Pro H1502URBT 5.2-Channel Audio Receiver can play .wav files from a USB drive.

17/08/2024

Worked as advertised

5
07/08/2024

Works perfectly out of the box.

5
23/07/2024

goodgood

5
23/06/2024

I bought this for a church. Our services are considered mission critical. Our live stream is very important to us, we don't want to have any down time or lack of quality. That is why we bought this product. We have used datavideo before and they have lasted us a long time.


A few things to know:
1. The power adaptor cable is not the most robust. It does have a screw on type connector, but it isn't the strongest. I accidentally dropped the unit and bent the power connected where it screws onto the device. I tried to bend it back in place and it broke off completely. Not cool. Luckily I have some other datavideo equipment around and was able to connect another power supply while a new one comes in the mail.


2. The device has male mini XLR connectors. If you're from the audio world (like me) you know this is backwards. You can easily find male mini XLR to female XLR. But it is harder to find the opposite. What it doesn't say on this website (BHphoto), is what's in the box. Funny, it doesn't even say on the datavideo website. When I ordered the product I ordered separate cables too. BUT, I didn't need to. In the box with the datavideo product they give you two mini XLR female to XLR female cables. How nice of them! But I wish I woulda known.


3. When you connect audio to this device it will show you nothing. No signs of life. It has audio meters, but nothing will appear. I was frustrated, knowing I was sending audio but not seeing the meter move. Finally I thought, let me connect the SDI cable. Still nothing. Then I turned on my switcher. Nothing. Then I turned on the camera and made sure I was sending a signal. When the device saw the signal it turned on and showed me audio levels.
Lesson: Send a signal over SDI so the device turns on and you can see and test audio meters.


A little more info would have been nice, but we got it working.


It is a sturdy little device. I hope it lasts me a long time.

5
09/06/2024

This is the perfect complement to a video switch that doesn't do audio. We recently went from Black Magic to Ross and needed an audio embedder and this one is perfect! It has meters built in for you can see how much audio you are inputting.

5
07/05/2024

We use this to add audio from a mixer to SDI video from a video switcher. Works great with minimal set up.

5
30/11/-0001

I'm using this with a data Video switcher and two Atomos recorders.
Works great!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Gra-vue Xio 9030hdemb-4aud-1u Sdi Audio Embedder

$5,753.85 $8,343.08

Gra-vue Xio 9030hdemb-4aud-3u Sdi Audio Embedder

$5,753.85 $7,077.24

Gra-vue 4-channel Audio De-embedder With Sync

$7,196.85 $9,715.75

Gra-vue Xio 9030hd 4-channel Audio De-embedder

$5,753.85 $8,112.93

Gra-vue Xio Hd/sd-sdi Audio Embedder

$5,753.85 $7,480.01

Gra-vue Mvio 4-channel Audio De-embedder

$6,596.85 $8,839.78

Gra-vue 4-channel Analog Audio Embedder Sd-sdi

$5,696.85 $8,659.21

Gra-vue Mvio Emb-4aud 4-channel Audio Embedder

$3,896.85 $6,195.99

Products You May Like

Scosche Baselynx 42w Vert Charging Station

$149.97 $212.96

Vertiv Avocent Displayport Cable 6ft

$134.19 $199.94

Sharp 110" Full Hd Led Display Kit

$188,997.00 $283,495.50

Godox C7r Rgbww Creative Bulb Light

$161.70 $216.68

Logitech Yeti Studio Xlr Microphone Black

$1,049.97 $1,669.45

Ulanzi Claw Quick Release Base Gen I

$59.85 $74.21